Question about Samsung DVD-V4600 DVD Player/VCR

1 Answer

Dvd player won't play disc

After loading disc, DVD player runs message "disc cannot be read, please check disc" despite the use of differentet discs. Does machine disc reader need to be cleaned?

Posted by on

  • 5 more comments 
  • hleckey Jan 13, 2009

    This is happening to me right now :-/

  • ccbiscuit Jan 17, 2009

    The DVD player keeps trying to load a disc, for as much as five minutes, and the sometimes gives the error message "Can't read disc". This is happening even with DVD's that I was previously able to use in the player. 


  • Anonymous Jan 18, 2009

    same problem1

  • ccbiscuit Jan 25, 2009

    I tried a CD/DVD player cleaner, and still no luck. Any other suggestions or is it probably just time to get a new one?

  • Anonymous Feb 01, 2009

    Same issue.

  • BeccaG69 Apr 04, 2009

    This is so frustrating. I've tried several movies that I've been able to play just fine before but now I get the error message, "dvd cannot be played, please check disc". Well, there's nothing wrong w/the disc as I tried it on my PC and it plays just fine. I used a Philips cd/dvd disc lens cleaner that does have these little fiber things on it and when inserted into the player is supposed to clean the lens. This didn't help, any other good cleaners out there that I should try that will actually fix this problem or is it just time to buy another player? Mine is less than 3 yrs old. The VCR part works just fine..go figure.

  • rr49 Apr 13, 2009

    DVD wontt accept new, DVD-R or DVD+R. Get thefollowing message:

    This disk cannot be played

    Please check the disk.



    I also have a Samsung DVD-VR330 that does the same thing.



    Any suggestions other than get a different brand?



    RR

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

There are a few different cleaning kits out there these days for DVD or CD players. I would recommend one that actually has fibers on it so the it brushes the lense of the DVD player. These cleaning kits can be found just about anywhere. Have you tried to clean it with anything?

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My factory DVD player will except disc the ejects it


If I understand your rather cryptic post correctly...

This very well could be a Blue-Ray disk loaded into a
non-Blue-Ray capable DVD player. Your car player's capabilities MUST match the disc, otherwise, the disc won't play.

I've run into this very same problem with my home DVD players. Which both are non-Blue-Ray capable, but I was able to verify the Blue-Ray discs on my PC.

Jan 02, 2015 | DVD & Blu-Ray Players

1 Answer

Player won't load a blank DVD-RW disc


because there is nothing to read in blank cd rw , because dvd operating system is not meant to write cd ,but only to read the disk

Jan 31, 2013 | Samsung DVDR120 DVD Recorder

1 Answer

DVD Player stops reading disc Error message :


usually this happens when lens cannot read the the disc. Due to few reason 1 Your disk is scratched 2 Your DVD lens is covered with dust 3 You need to replace DVD lens
Try another few CD/DVD to rectify whether there is any problem with dvd you are trying to play
if this error occurs on all the dvd you played then the most likely proble is with your DVD lens either its coverd with dust use Disk cleaner if not you got to replace a new DVD lense as per model

Feb 18, 2010 | Samsung DVD-V9800 DVD Player/VCR

1 Answer

Our only one month old portable insignia dvd player will not read any dvd...get message stating "loading" or no disc...Please advise


try clean the lens with cotton buds gently/smoothly...try audio cd or vcd to play if it will play and not playing if the disc is dvd...lens for replacement partially burnt

Jan 03, 2010 | Insignia I-PD720 Portable DVD Player

1 Answer

DVP-NS30 shows "CANNOT PLAY" message when DVD inserted


Follow this procedure to troubleshoot if the DVD player cannot read or play the inserted disc.
  1. Ensure the inserted disc is compatible with the DVD player.IMPORTANT: Refer to the operating instructions supplied with the product for a list of compatible disc. Manuals are available online in the Manuals/Specs/Warranty section of the Sony® eSupport Web site.
  2. Use a soft cloth to clean the disc.
  3. Examine the disc for any cracks or scratches that might be interfering with playback.
  4. Attempt to play another disc.NOTES:
    • If another disc plays in the DVD player, then the previous disc is faulty.
    • Some recordable discs may not play correctly because of the quality of the recording, the physical condition of the disc, or the characteristics of the recording device or authoring software used.

  5. Remove the disc from the DVD player.
  6. Turn off the DVD player.
  7. Unplug the power cord of the DVD player from the AC outlet.
  8. Let the DVD player remain without power for 1 minute.
  9. Plug the power cord back into the AC outlet.
  10. Turn on the DVD player.
  11. Insert the disc into the DVD player.
  12. Attempt to play the disc.
If still persists, its time for your device to get serviced.

Aug 01, 2009 | Sony DVP-NS57P

1 Answer

I HAVE A SAMSUNG DVD HR753 WHICH HAS 160 HARD DRIVE


Make sure you are using the right disk IE, DVD-R or DVD+R. Most Newer DVD player's will play DVD-R but very few play DVD+R

Jun 23, 2009 | Toshiba SD-6200 Multi-disc DVD Player

1 Answer

DVD won't play


Its Sounds as if your DVD went kaput this tends to be a problem with most combination players usually the VCR goes first also you may need to run a cleaning CD made for DVD players maybe that will help.

Apr 03, 2009 | Samsung DVD-V3500 DVD Player/VCR

1 Answer

Player won't read a DVD


Sounds like a bad pick up assy (Laser)

Nov 24, 2008 | Samsung DVD-R155

1 Answer

Not recognizing DVD player


i would say for some reason your dvd player is not compatible from now on with that brand of blank dvd!


get the firmware update from the brand website all you do is download the file burnit on a cd and put it in the dvd player should fix most and eventual problems

Jan 14, 2008 | Panasonic DMR-EH75VS DVD Recorder/VCR/HDD...

Not finding what you are looking for?
Samsung DVD-V4600 DVD Player/VCR Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4758 Answers

Are you a Samsung DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...