Question about Ezonics EZCam Webcam

2 Answers

Help?? hi i got given a web cam and i never got the software for it whe it got givin to me...and i just wanna download it off the web the type of web cam is Ezonics and the model no. is EZ-306 SPCA561A can you help me at all??? contact me at this email address punk_rocker_2006@msn.com or kewlestrocker2005@yahoo.com please and thank you! =]

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ezonics Master
  • 2,130 Answers

1st You download Webcam Driver.
webcam driver After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Dec 06, 2013

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

Step 1: The "Tools" menu of Windows Live Messenger

1. Recover Windows Live Messenger in our software if you do not have it yet.
2. Start the installation of the software.
3. Once this is done, go to the Tools menu software.

In this menu, two links are important in order to properly configure your camera:"Setting audio and video" and "Parameters of the webcam."This is the first that we will discuss first and foremost, the second used primarily to adjust the parameters of the image in the secondary stage but we are dealing with. Launch therefore setup wizard and click on "Next".

Step 2: The setting of loudspeakers

1. Select your hardware in the menu.
2. Check the box if you use a helmet.
3. Test finally your sound output in order to adjust the volume.

It is possible that you find in the menu several choices. That means you have several elements in your computer capable of transmitting sound, a dedicated card and your motherboard, for example. In this case, make sure to select well the correct input, what you quickly verify the test by loudspeakers.

Step 3: At the turn of the microphone

1. Select your sound source.
2. Start talking to your microphone.
3. Observe the cursor, if it moves, your microphone is working.

Two remarks on the stage configuration. On the one hand, if your camera has no microphone, you must go through a device that you must annex plug into the pink on your sound card. On the other hand, if your mouse does not work, you may have selected the wrong input device sound. Take particular care in this setting and not leave this page only when the cursor s'agitera,
indicating that your voice is recognized by the software.

Step 4: Turning finally to the image

1. Specify this time the source of the video.
2. Observe the window of return: if your setup is satisfactory, your image should appear.
3. Adjust the frame rendering through the "Option" button.

Posted on Aug 06, 2009

  • libby_98 Aug 06, 2009

    Step 1: The "Tools" menu of Windows Live Messenger

    1. Recover Windows Live Messenger in our software if you do not have it yet.
    2. Start the installation of the software.
    3. Once this is done, go to the Tools menu software.

    In this menu, two links are important in order to properly configure your camera:"Setting audio and video" and "Parameters of the webcam."This is the first that we will discuss first and foremost, the second used primarily to adjust the parameters of the image in the secondary stage but we are dealing with. Launch therefore setup wizard and click on "Next".

    Step 2: The setting of loudspeakers

    1. Select your hardware in the menu.
    2. Check the box if you use a helmet.
    3. Test finally your sound output in order to adjust the volume.

    It is possible that you find in the menu several choices. That means you have several elements in your computer capable of transmitting sound, a dedicated card and your motherboard, for example. In this case, make sure to select well the correct input, what you quickly verify the test by loudspeakers.

    Step 3: At the turn of the microphone

    1. Select your sound source.
    2. Start talking to your microphone.
    3. Observe the cursor, if it moves, your microphone is working.

    Two remarks on the stage configuration. On the one hand, if your camera has no microphone, you must go through a device that you must annex plug into the pink on your sound card. On the other hand, if your mouse does not work, you may have selected the wrong input device sound. Take particular care in this setting and not leave this page only when the cursor s'agitera,
    indicating that your voice is recognized by the software.

    Step 4: Turning finally to the image

    1. Specify this time the source of the video.
    2. Observe the window of return: if your setup is satisfactory, your image should appear.
    3. Adjust the frame rendering through the "Option" button.

×

2 Suggested Answers

SOURCE: EZ-306 SPCA561A software

www.ezonics.com...Go here and download the drivers needed for the cam.RICHARDM69

Posted on Dec 07, 2008

jyackle5
  • 8197 Answers

SOURCE: Ezonics Web Cam EZ-306 SPCA561A

Go to this site you need to know the exact webcam though.

http://www.shopezonics.com/Articles.asp?ID=108


Good Luck

Please rate FixYa!

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We are trying to use a WiLIfe camera on a skype call but Skype does not recognize it. What are we doing wrong


Hi ,
1st you should be abale to have the web cam come on without being on skype, so you need to find the software that came with the web cam , if you dont have the software you can download it at www.logitech.com /support and type in make and model ...web cam and download the software it needs ...............if you have done this already , you can try deleteing skype software and then reinstall it ...............Im here to help , so please let me know if this does'nt work for you .......Goodluck ............................Roy

Aug 06, 2011 | Logitech WiLife Pro Webcam

1 Answer

Web cam instal prob


Hi,

http://www.logitech.com/index.cfm/435/4225&hub=1&cl=us,en

Please go to downloads and choose your OS. Then download the software and use it.

Regards
Sweet Rascal

Jan 28, 2010 | Logitech QuickCam Communicate Deluxe...

2 Answers

Software of my web cam


go to download.com and in the search tab, just type the model of your web cam............... you can download with free of cost

don't forget to rate this solution

Jul 05, 2009 | Logitech Webcam

1 Answer

Help with web cam


DOWNLOAD THE SOFTWARE FROM THE GOOLE SEARCH. BY TYPING MAHATTAN WEBCAM SOFTWARE DOWNLOAD.

AND INSTALL IT IN UR COMPUTER.

REBOOT UR COMPUTER.

MAKE USE OF WEBCAM..

Jul 10, 2008 | IC Intracom Manhattan FUN! CAM Webcam

4 Answers

I bought a giga ware webcam, but i lost the cd.


I really dont wanna have to buy a whole nother cam. but i dont know where to just buy the cd Or if i can get other software for it without needing the cd. Help please?
i have a tricom night vision pc camera

Apr 19, 2008 | Webcams

2 Answers

Install web cam


if you try there web site you may need find the driver try here logitech hope this is so help ..


riz.

Feb 14, 2008 | Logitech Webcam

2 Answers

Installing webcam in labtop


Here is a link for the driver
http://us.creative.com/support/downloads/download.asp?DriverLang=1033&searchString=PD1170&x=13&y=16

Nov 20, 2007 | Creative Labs Video Blaster WebCam

5 Answers

I HAVE EASYCAM PRO HO98064


You can download the software from the link below: http://www.jascoproducts.com/support/software-downloads.asp#pccams Please update the question & let us know if the information given was useful to you - Good Luck!

Sep 08, 2007 | GE EasyCam Pro Webcam

Not finding what you are looking for?
Ezonics EZCam Webcam Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ezonics Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Teet Bergmann

Level 3 Expert

565 Answers

Shahzad  Waseem...
Shahzad Waseem...

Level 3 Expert

746 Answers

Are you an Ezonics Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...