Question about Heating & Cooling

Open Question

Control knob for maxol montana 1500 wall heater

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
roniecon
  • 6918 Answers

SOURCE: I HAVE MODEL GP30 WALL HEATER. I CAN LITE PILOT

The thermocoupler is bad.Replace it,or if you can adjust it to where the thermocoupler is in the pilot flame.You know you have to hold the knob down for about 30 seconds or a minute,don`t you?If the flame will not touch the thermocoupler,it will not stay lit.You can cut a piece of copper tubing,or steel tubing to slidde over the old thermocoupler to make contact with the pilot flame,and it will work,if the thermocoupler is not in to bad of shape.

Posted on Oct 17, 2009

Ad
  • 2 Answers

SOURCE: Can you tell me where

To find replacement knobs, please try any of the following online solutions:
http://www.reliableparts.com/catalog/Cadet-Repair-Parts-Accessories-466898

http://www.cadetelectricheat.com/heateraccessories.html

Hope this is helpful -
Cadet
Director of Marketing
lsteele@cadetco.com

Posted on Jan 24, 2011

TheMobilian
  • 8220 Answers

SOURCE: i have a wall williams wall heater and when i turn

themobilian_2414.jpg
The green knob does the flame adjustment. 1 is low and 9 is high.

Posted on Jun 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Marley heater control knobs


can't find a contrl knob for my marley wall heater model # fzl3004b

Jan 17, 2013 | Marley Electric Hydronic Baseboard Heater,...

1 Answer

How can I replace the a/c fan knob Pontiac Montana


If it broke off the pole on the heater control assembley that the knob mounts to you
could try gluing it but, 99% of the time it wont work and will break again. You need
heater control. Check with your local junk yard, it would be the cheapest route to go. Worst case call the dealer and see how much a new heater control for your
costs. At least if it is new you know you will not have other problems.

Nov 23, 2011 | Cars & Trucks

1 Answer

I own a 2006 Pontiac Montana SV6, there is very little heat coming from the heater, a/c working fine, fan blowing full capacity. Could it be the thermostat.


probably the blend door not opening fully. Do you hear a clicking under the dash by passenger's feet? If not, try calibrating the system:
  1. Place the ignition switch to the OFF position.
  2. With the Mode knob in the PANEL position, press and hold the AC button for 5 seconds.
  3. Rotate the Mode knob fully counterclockwise.
  4. Rotate the Mode knob fully clockwise.
  5. Rotate the Mode knob fully counterclockwise.
  6. Release the AC button.
  7. Wait 40 seconds for the HVAC control module to self-calibrate.
  8. Start the vehicle.
If this doesn't work, your actuator may have failed. Look under the dash to see if any of the actuators on the heater box are trying to turn when you change the temperature setting. Unfortunately, I cannot find aftermarket parts for your heater, so if the door isn't working you may need to go to the pontiac dealer. Let me know if you have questions.

30db56a.gif

Oct 22, 2010 | 2006 Pontiac Montana SV6

1 Answer

Manual required for Maxol Homewarm 600 or Maxol Morocco 20 Boiler


If he can't fix your boiler without having the instruction manual then he can't be much of an engineer. i would ring someone else.

Nov 19, 2009 | Thermos Kitchen Appliances - Others

1 Answer

Re Williams 3003622 Heater Please advise how to ignite pilot light.


You will first need to turn the control knob to pilot. Then depress the control knob button and hold it. Then press the push button piezo igniter several times until pilot lights or open pilot inspection cover and manually light pilot with match/lighter. You may need to hold the control knob for at least a minute. Then release the control knob and if the pilot stays lit then turn the control knob to on. If it does not light then repeat the process again.

Oct 27, 2009 | Williams 3003622 Ceramic Wall Mounted...

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

2597 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...