Question about Behringer EuroPower EP4000 2Channel Amplifier

Open Question

Behringer ep4000 no sound fan not running

Powers on red lights flash then go out.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: Behringer 1500 red light. Amp powers up fan comes

RED LIGHT MEANS THERE IS EITHER WIRES TOUCHING OR A BAD GROUND. IN WORSE CASE SCENERIO THE A CHANNEL IS BLOWN

Posted on Feb 24, 2009

dunnbiker
  • 8546 Answers

SOURCE: I have just bought an

You don't (unless you want two B1520's on one channel and the sub on another). Reading the manuals would help.

The EP4000 amp drives only two channels. It CAN be bridged for one speaker but it won't support two channel and bridged mode simultaneously.

http://www.retrevo.com/support/Behringer-EP4000-Amps-manual/id/23591dj795/t/2/

The B1520 subwoofeer is PASSIVE so it will need a dedicated amplifier to power it and control its volume independently of other speaker channels.

http://www.behringer.com/EN/Products/B1800X.aspx

Posted on Aug 31, 2011

  • 5603 Answers

SOURCE: I have a pair of

Run one per channel... DO NOT forget to use an electronic crossover feeding the amps as the speakers are rated only up to 300HZ so you need a low pass feeding these or you may burn them up. Some people are using the DriveRack crossover module for example to prevent sending highs to the subs and smoking them.

Posted on Sep 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bias current behringer EP4000


What about the bias current? Most current amplifier, say within the last 15 years, do not have adjustable bias.

May 10, 2014 | Behringer EuroPower EP4000 2Channel...

1 Answer

I have a pair of Behringer B1800x-pro subs that I am hoping to power with my EP4000. Would it be best to run one per channel or would it be better to run them in series with the amp bridged?


Run one per channel... DO NOT forget to use an electronic crossover feeding the amps as the speakers are rated only up to 300HZ so you need a low pass feeding these or you may burn them up. Some people are using the DriveRack crossover module for example to prevent sending highs to the subs and smoking them.

Sep 21, 2011 | Behringer EUROPOWER EP4000 4,000-Watt...

1 Answer

I have just bought an Behringer EP4000 amp. How do I connect 2 x B1520 and 1 x B1800X speakers to this amp? Thanks!


You don't (unless you want two B1520's on one channel and the sub on another). Reading the manuals would help.

The EP4000 amp drives only two channels. It CAN be bridged for one speaker but it won't support two channel and bridged mode simultaneously.

http://www.retrevo.com/support/Behringer-EP4000-Amps-manual/id/23591dj795/t/2/

The B1520 subwoofeer is PASSIVE so it will need a dedicated amplifier to power it and control its volume independently of other speaker channels.

http://www.behringer.com/EN/Products/B1800X.aspx

Aug 31, 2011 | Behringer Eurolive B212A Speaker

1 Answer

I have two JBL MRX 515 speakers at 8 ohnms and two behringer bins at 300 watts 4 ohms running off a behringer EP4000 amp, would this be ok ? and not casue any damage to the speakers


Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Behringer-EP4000-Amps-manual/id/23591dj795/t/2/

http://www.raltron.com/cust/tools/parallel_resistance.asp

It's ohm's law, dude. 1/a + 1/b = 1/total. One each 8- and 4-ohm speaker in parallel per channel would be 2.7 ohms (nominal). So it will work in theory.

How you manage the potential difference in volume between dissimilar speakers on the same amp channel is a mystery.

Distortion will kill any speaker, not power. Stay within the amp's usable range.

Jun 23, 2011 | JBL MRX515 15" 2-Way Loudspeaker Main /...

1 Answer

I need a circuit board for a EP4000...


If the board has not been burned up, one should troubleshhot the bad components.

If you need to replace it call Behringer at 1-425-672-0816. Have the board number including any revision number to get the Behringer actual part number. They will give you and incident number as well for you to call FullCompass who distributes the spare parts now. You can find FullCompass phone number via Google.

Dec 13, 2010 | Behringer EUROPOWER EP4000 4,000-Watt...

1 Answer

Behringer 1500 red light. Amp powers up fan comes on then a have a channel A red light that doesn't go out. No Sound


RED LIGHT MEANS THERE IS EITHER WIRES TOUCHING OR A BAD GROUND. IN WORSE CASE SCENERIO THE A CHANNEL IS BLOWN

Feb 23, 2009 | Behringer EUROPOWER EP1500 Car Audio...

Not finding what you are looking for?
Behringer EuroPower EP4000 2Channel Amplifier Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Behringer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

Alvan Dawkins
Alvan Dawkins

Level 1 Expert

2 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Are you a Behringer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...