Question about Computers & Internet
Always be careful when you come to doing such things. I think you should try and recovery to factory default.
Posted on Dec 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: NTLDR missing .
Put the WindowsXP CD in the cd drive,
Configure your BIOS to boot from WindowsCD
After booting one the first screen select "R" which stand for repairing the installation in recovery mode
then select the windows installation you want to repair by typing the number inbetween the square brackets
you will be asked for the administrator password, type it,
once you are in recovery mode.
type this command "copy x:\i386\ntldr y:\ntldr"
where 'x' is your cd Drive letter and 'y' is your windows directory C: usually
after the message "1 file copied"
exit the recovery mode by typing exit.
restart your system.
POST back with your results
Posted on Jan 29, 2008
SOURCE: ntldr is missing
First check to see if you have a floppy disk in your floppy drive, if so remove it.
Second check if you have a CD disk in the CD/DVD drive, if so remove it.
If there are no disc in the drives, then the ntldr file is missing or corrupted and needs to be replaced. Please follow these instructions :-
Posted on Feb 04, 2010
Download this Recovery Console BootCD
Burn the image (ISO) to CD.
Boot from the newly created Recovery Console BootCD
Log into the Administrator account (press 1 then press enter)
On the command prompt type: chkdsk c: /r (and then press enter) Note one space after "c:")
Once CheckDisk has finished repairing the faults, type Exit, and then Restart (remove the BootCD)
Posted on Mar 29, 2010
1.Insert the Windows XP CD-ROM into the CD drive, and then restart the computer.
2.Click to select any options that are required to start the computer from the CD drive if you are prompted.
3.When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
4.Press 1 (One) to select windows XP and then hit enter.
5.When you are prompted, type the Administrator password. If the administrator password is blank, just press ENTER.
6.At the command prompt, Type Bootrec /RebuildBcd and then press ENTER.
7.If the Bootrec.exe tool runs successfully, it presents you with an installation path of a Windows directory. To add the entry to the BCD store, type yes. A confirmation message appears that indicates the entry was added successfully. 8.If the Bootrec.exe tool cannot locate any missing Windows installations, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order in which they are presented. Press ENTER after each command.
Bcdedit /export C:\BCD_Backup
ren c:\boot\bcd bcd.old
1.Restart the computer
Posted on Dec 24, 2010
Tips for a great answer:
May 20, 2014 | Samsung Series 5 Ultrabook Laptop
Apr 17, 2014 | Samsung Series 5 Ultrabook Laptop
Jan 26, 2014 | Samsung Series 5 Ultrabook Laptop
Nov 08, 2013 | Samsung Series 5 Ultrabook
Apr 10, 2013 | Samsung Series 5 Ultra 530U3C - Ultrabook...
Oct 05, 2011 | Bugaboo 'Cameleon' Stroller
215 people viewed this question
Usually answered in minutes!