Question about Pride Mobility Victory 3 Wheel Electric Scooter
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It is often a damaged accelerator (Potentiometer). Sometimes the shaft on the wigwag breaks the contacts in the accelerator from being moved too vigorously when going over a bump too fast. A technician would need to repair this for you. Happy scooting. Regards Chris… firstname.lastname@example.org
Posted on Jun 22, 2009
Click on this link and a pdf manual for a Victory 10 will appear.
Posted on Aug 28, 2009
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new batteries. Always replace both batteries at the same time.
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp-hour (Ah) capacity. Use 12 Volt deep cycle batteries.
1.Remove the battery pack from the Travel Scooter.
2.Carefully turn the pack upside down.
3.Remove the eight (8) screws from the perimeter of the battery pack.
4.Carefully turn the pack right side up and remove the lid.
5.Disconnect the black (-) and red (+) battery cables from the battery terminals.
6.Remove the old battery.
7.Place a new battery in the battery pack.
8.Connect the red battery cable to the positive (+) battery terminal.
9.Connect the black battery cable to the negative (-) battery terminal.
10.Position the lid back onto the battery pack ensuring all wires are inside the pack so they don’t become pinched.
11.Carefully turn the pack upside down.
12.Reinstall all screws and tighten.
13.Charge the new batteries for 8-14 hrs before the first use.
I hope this helps and good luck!
Posted on Feb 24, 2010
Tips for a great answer:
May 08, 2016 | Pride GoGo Elite Traveller 12amp Mobility...
Feb 25, 2015 | Pride Mobility Products GoGo Elite...
Sep 04, 2014 | Pride Mobility Products GoGo Elite...
Aug 11, 2014 | Pride Mobility Products GoGo Elite...
Jul 25, 2014 | Pride Mobility Products GoGo Elite...
Aug 25, 2011 | Pride Health & Beauty
Nov 06, 2010 | Pride New Mobility Victory XL 4 Wheel...
Sep 19, 2010 | Activeforever Pride GoGo Ultra 4 Wheel...
Aug 14, 2009 | Pride Mobility Products Go-Go Elite...
Feb 08, 2014 | Pride Mobility Victory 3 Wheel Electric...
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: