Question about NetGear DG834G Router

1 Answer

Help me i have been trying to get on my login screen for my router witch a netgear dg834g. i have tried to put my ip address in and it just came up with a lod of blogs as results. so is it just me being thick or is thire a problem. please help i am at my wits end. i have been triying every day now for a week.

Posted by on

  • mathew smith Jan 15, 2009

    thankyou all for your help problem solved thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Try using your default gateway IP instead of you actual IP. 

If you are using windows type CMD into your run command (usually under the start>run or if using vista/W7 into the search bar) and pressing enter. Then type ipconfig and press enter.

This will give you something like this:

Connection-specific DNS Suffix . : gv.shawcable.net
Link-local IPv6 Address . . . . . : fe80::e89b:17b9:c1e5:6a6d%13
IPv4 Address. . . . . . . . . . . : 192.168.0.103
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Take the Default Gateway IP (In this case 192.168.0.1) and type it into your browser.

Posted on Jan 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i find my wep key


your Wep Key is set up in your router, you have a netgear your netgears IP address default gateway is 192.168.2.1. Username: admin Password: password this should get you into your router look for security this will give you information to what your wep key is.

Jun 18, 2010 | NetGear DG834G Router

3 Answers

I can't access my netgear Modem I need web address


Hi

Do you mean you need the IP address on which you can access the router portal settings?

Try to enter 192.168.1.0, if you cannot still access into the router try to reset the router. You can find a small hole at the back of the router you may use a small pin like paper clip, press the button for 5 seconds.

Let me know here again.

Thanks

Feb 06, 2010 | NetGear DG834G Router

1 Answer

I cannot log in to my router


Hi,
I want to tell you that every router requires some different ip address through which you can access the router page. I can give you few steps which you can follow and it will resolve your concern.

1. Make sure that you have disable your antivirus from your computer and no firewall should be active.
2. Click on Start - Run - Type in "cmd"
3. It will give you black screen that is command prompt.
4. Under black screen you have to type "ipconfig" and press enter
5. You will get some information on your computer related to Ip address
6. Now you can see default gateway and it will show you some numbers
7. You have to use the same numbers to login to your router
8. or you can also try the address www.routerlogin.com
9. It will ask you for user name and password by default it is "admin" and password "password" in lower case

These steps take you to login to your router page. I believe that will help you to resolve your concern.

Thanks & Regards
Jaspreet Singh Saini


Oct 27, 2009 | NetGear DG834G Router

1 Answer

Need network security key or passphrase for my netgear DG834Gv4/DG834GBv4 !!! PLEASE( IP 192.168.0.1)


LOGIN
There is a login key for the router that can be accessed by opening the
address http://192.168.0.1 as described: after the login all settings inside the router can be changed.
Note: use a wired connection when going into the routers' ip address.

When you can not login with the default password, reset the device:

Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s administration password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
• Use the Erase function of the Web Configuration Manager.
• Press the WPS button and Wireless button on the side of the router simultaneously. You can
use this method for cases when the administration password or IP address is not known.

Resetting to Factory Default Settings
You can use this method for cases when the administration password or IP address is not known.
To restore the factory default configuration settings:
1. Press and hold the WPS button and the Wireless button on the side of the router until the Test
LED turns on (about 10 seconds).
2. Release the buttons and wait for the router to reboot.

WIRELESS SECURITY + PASSPHRASE
The wireless security is a network name for wireless connection called
SSID: the identification name of your router.
The passphrase is used for a secure password getting permission to have wireless data transfer from the router to the computer and vice versa. ( No internet connection so far: only Local Area Network [LAN] )


MODEM
Because the device is a router / ADSL modem you'r able to setup the
modem part for connection on a telephone line to the internet / Wide Area Network [WAN] .
You should use passwords from the Internet Service Provider [ ISP ] enter and save them in the modem section of the device.


Support for DG834G on the internet:
http://www.netgear.com/Products/RoutersandGateways/WirelessGRouters/DG834G.aspx

Sep 22, 2009 | NetGear DG834G Router

2 Answers

My PS3 cant find IP address from Netgear router DG 834,what I have to do


make sure you are putting the network key correctly...if you dont know tha network key.. try the following.. . Connect a computer to the router using any one of the 4 available ports.
2. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
3. Access the router usually by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.
4. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
Click on wireless settings (under setup) from left menu.
Change the channel to 11
*-security option > select wep.. in KEY 1 put a ten digit number .... nothing under passphrase ..
Apply settings to save the changes.
*-then try to connect your PS 3
I hope the steps above will help resolve the issue. If you need any further help, please email us back so that we can continue to work on a solution.
I hope this information allows you to resolve this issue.

Jun 14, 2009 | NetGear DG834G Router

1 Answer

I have a DG834G router. It used to work wirelessly Ok with XP, but since I have rebooted my Laptop and changed my OS to Vista Basic, I cannot access the intrenet anymore. I know that with XP, I used to...


You were close, the IP address fr netgear is :
192.168.1.1 and use: User= admin, and password=password for the sign on to the setup screen. given you didn't change the logon credentials.

Feb 27, 2009 | NetGear DG834G Router

1 Answer

Cannot contect


Who setup the dg834g router?

If it wasn't setup for wireless .. then you need to do that ..You must
login to the router (ip address by default is 192.168.0.1)

The admin password is password.

Jan 12, 2009 | NetGear DG834G Router

1 Answer

Cant get the login screen up for router


Leave your AOL Screen logged on and start internet explorer,

try entering the http://192.168.0.1 in the address box

and you should get the login pop-up

Jan 12, 2009 | NetGear DG834G Router

2 Answers

NETGEAR DG 834G ROUTER


Could you give me some overview of the topology of the network your trying to install the router on? (How it's all connected, and the ip addresses of the machines and other routers on the network (if any)) ?

Nov 29, 2007 | NetGear DG834G Router

2 Answers

Can't get internet access through NetGear DG834G Router


You have to configure your router...

If your ISP provided you with IP Address, enter the assigned IP address, subnet mask, gateway IP address anbd DNS IP address for your broadband router.

If you connect to the Internet using an xDSL Modem and your ISP has provided you with a Password and a Service Name, then your ISP uses PPPoE to establish a connection. You must enter the required information.

Hope this could help..

Mon =)

Nov 15, 2007 | NetGear DG834G Router

Not finding what you are looking for?
NetGear DG834G Router Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...