Question about HP LaserJet Office Equipment & Supplies

Open Question

49.FF01 Service error

5550 HP

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leroyal
  • 2120 Answers

SOURCE: 49.c02 service error message on HP laserjet 4100

General printer error. Unplug the power cord for 10 seconds.

Posted on Feb 06, 2009

machambi
  • 194 Answers

SOURCE: error code 49.FF01 can't turn on or off

A firmware error occurred ( This error is usually caused by a bad formatter board)
SOLUTION
1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter.

Posted on Feb 22, 2011

machambi
  • 194 Answers

SOURCE: error code 49.ff01, hp laserjet 4250tn

This error is usually caused by a bad formatter board
SOLUTIONS
1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter.

Posted on Feb 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep getting error code NVRAM err=0x10, what does this mean?


HP Printers 49.XXXX Service Errors ' Market Point's Tech ...

blog.marketpoint.com/2010/07/29/hp-printers-49-xxxx-service-errors/
Jul 29, 2010 - In this article, I'll discuss the meaning of the error, what causes it, and gives ... changes with the firmware or other parts to prevent the error from recurring. ...fixes for a few printers and was surprised to see several 49 errors being ... try a cold reset or NVRAM initialization (see service manual for details).

A wifi spot named "NVRAM WARNING: ERR = 0x10" - DealExtreme Forum

club.dx.com/forums/forums.dx/threadid.1136935
Mar 11, 2012 - A wifi spot named "NVRAM WARNING: ERR = 0x10" ... It has the sameerror, both in wifi settings and in the wifi Analyser app. I did obtain the ...

57.1 printer error - HP Support Center


Dec 17, 2015 | Office Equipment & Supplies

1 Answer

Hp 5550 service codes


communication error: upgrade your print driver and it should run better. Here is where to find print drivers. http://www8.hp.com/us/en/drivers.html

Jul 31, 2014 | HP LaserJet 5550 Printer

2 Answers

49 service error ff04


your printer driver is corrupt or the files your printing are corrupt- most 49.xxyy errors are down to software external to the printer. not sure?.
disconnect the printer from all network points and cycle the power - when it is ready perform a path print test ( found under the diagnostics menu on the printer itself ) and you will likely find no errors ( if by some horror of horrors you do get 49.xxyy error then you will need to replace the firmware chip - Very Very unlikely) -
what to do--
remove the printer and uninstall from the workstation - reboot the PC - re install the latest driver for your operating system downloaded from HP website
re connect the printer - print away !!

Jan 28, 2014 | HP LaserJet 4600dn Color Printer

1 Answer

49 ff95 service error


49.XXXXX ERROR alternates with To continue turn Off then On 49.XXXXX ERROR alternates with To continue turn Off then On

Explanation

A critical firmware error has occurred.

Recommended action

  1. Turn the printer Off and then On.
  2. If the message persists, contact HP Support.

Nov 24, 2013 | HP LaserJet 5200 Printer

2 Answers

Hp color laserjet cm1017 mfp 49 service error showing in disply screen and restart the printer


Hp color laserjet cm1017 mfp 49 service error showing in disply screen and restart the printer

Aug 15, 2011 | HP LaserJet CM1017 MFP All-In-One Color...

1 Answer

Error code 49.ff01, hp laserjet 4250tn


This error is usually caused by a bad formatter board
SOLUTIONS
1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter.

Feb 22, 2011 | HP REFURB LASERJET 4250TN PRINTER

1 Answer

Error code 49.FF01 can't turn on or off


A firmware error occurred ( This error is usually caused by a bad formatter board)
SOLUTION
1. Press CANCEL JOB to clear the print job from the printer memory. 2. Turn the printer off, and then turn the printer on. 3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.) 4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer. 5. Turn the printer off. 6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.) 7. Remove all EIO devices from the printer. 8. Turn the printer on. 9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device. 10. Replace a DIMM or EIO device if you determine that it causes the error. 11. Remember to reconnect all cables that connect the printer to the network or computer. 12. If the error persists, replace the firmware DIMM. 13. Replace the formatter.

Feb 22, 2011 | HP LaserJet 4250tn Printer

2 Answers

The error "49. FF05 SERVICE ERROR" is displayed on


If the error can be reproduced, use the following sections of this document:
  • Product-specific documents Product specific document are available on the HP support website at the following url http://welcome.hp.com/country/us/en/support.html . Select your product and use the search string Product specific 49 errors to locate your product specific 49 error troubleshooting document(s).
  • Clearing the error
  • Validating the firmware
  • Stack Trace Random error troubleshooting
  • Hardware troubleshooting (if applicable)
Power-cycle doesn't eliminate error If the error cannot be eliminated by a power-cycle, use the following sections of this document.
  • Product-specific documents Product specific document are available on the HP support website at the following url http://welcome.hp.com/country/us/en/support.html . Select your product and use the search string Product specific 49 errors to locate your product specific 49 error troubleshooting document(s).
  • Clearing the error
  • Hardware
Feature-specific error The error has been narrowed down to a specific feature.
  • Product-specific documents Product specific document are available on the HP support website at the following url http://welcome.hp.com/country/us/en/support.html . Select your product and use the search string Product specific 49 errors to locate your product specific 49 error troubleshooting document(s).
  • Validating the firmware
  • Software, Sending, Faxing, and environmental troubleshooting
  • Stack Trace Random error troubleshooting

Oct 26, 2010 | HP LaserJet P3005d Printer

1 Answer

49.c02 service error message on HP laserjet 4100


General printer error. Unplug the power cord for 10 seconds.

Jan 21, 2009 | HP LaserJet 4350 Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...