An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: have software disc but nothing happens
Did you install the software with the camera connected to
the computer? Disconnect the camera from the USB port and reinstall the
software. When the program asks you to connect the camera, do so, and it
should work. Hope this is of some help.Bud
Below is info for setting up Audio & Video to chat on
line after you install , either Skype or a messenger program.
Web Camera’s have to be
setup on the program they are to be used with.Just installing the camera on your computer does not set it up to broadcast
on messengers or Skype.
Each program has Options that have to be setup in order for
the Audio and Video to function properly.
After downloading and installing Skype set it up as follows:
TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone
and Speakers to the computer Audio Card.
click on the Video Settings.
camera if installed properly will come up and show a picture.
on the bottom of the page click on Save.
The camera and audio should function properly.Your friends and Family will now see and
talk to you.
After downloading and installing Yahoo Messenger set it up
Messenger at the top left and click on it.
go down to Preferences and click on it.
Calling and Devices on the right and set the Microphone and Speakers to
the computer Audio Card.
go to the Test Audio section and(in blue writing) click on“Open the call setup assistant” and follow the instructions on the
you start Windows Live Messenger, expand the view by clicking on the
square on top left next to the red X.
on the Windows Live messenger window on the right side, click on “ “Show
Menus.” And then click on “Show the Menu Bar”.
go to the Menu Bar on right side, click on “ “Action.”
“TOOLS” and click “Audio and Video Setting” and follow the
NOTE:You audio and
video shoud work.Enjoy.
When done both the Audio and Video will function properly so
you can chat and see family or friends you are connected to.
Hope this helps.Bud
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Gently clean the CD with a cloth with no paper fibers. Like a baby spit up rag, is a good example. Insert the disc and if doesn't start go to it directly through your my computer and start it manually. Or if you are doing from scratch press F12, and it will boot from Cd and press enter.
to download the Camera Diagnostic Tool and run it to check out your camera and/or problem.
Be sure the camera is plugged into the USB port before running the program.
As you run the program, write down the info about the camera so you will know what model and who manufactured the camera you have attached so you can get the proper software drivers for it. Hope this helps. Bud
If you're installing a USB webcam don't connect a cable before installing drivers. So, run setup from CD continue with install sometimes in the middle of installation it asks you to connect webcam to USB, do it and finish setup. If it's not asking you to connect Webcam, first finish setup and than connect Webcam. Good Luck!
i had the same problem, for some reason the pc won't allow us to use the software disc anymore.......download the new driver here: http://files.ofile.com/ofile?controller=Share&action=shareFile&key=934b535800b1cba8f96a5d72f72f1611
http://www.jascoproducts.com/support/software-downloads.asp copy and paste the above line into address bar press enter will take you to site with driver for your cam listed sorry its only for xp not vista cannot find driver for vista