- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I see that you are getting colore lines on the screen hiding half of your LCD screen, Please see steps below.
*Turn your Laptop OFF.
*Once Turned OFF, Turned the Laptop back ON then keep on tapping F2 on your keyboard.
*By Tapping F2 on the keyboard this will bring you to the BIOS screen, once in the BIOS of your Laptop and the Colored Lines are still present then the problem is the LCD of your laptop and may reuire replacing.
*If the Colored Lines are not present then the Problem would possibly be the connection of the Video Card to the LCD or the Video Card itself.
*Reformatting Windows can be one of the steps to be done to find out if the issue Colored Lines will be fixed or not.
Try this: Turn it off. Disconnect power cord and any other device attached to it. Take battery out. Without anything attached. Hold down the power button for 10-15 seconds. Connect the power cord only. Hold down F2 (while it's off) Turn it on while holding down F2. Let go of F2 when something comes out of the screen. If multi colored lines still appears. You have either defective LCD(screen) or video card.
Same with you i have may experience also regarding a color lines in my laptop monitor, so what i did is that i find a computer shop in my area and i let my laptop checked with their technician and ask what is the problem of my laptop then the technician explained to me what are the causes of those lines and then they fix it for me. So i just wait for 30 minutes then my laptop is back to its original condition. So my recommendation: please find a computer shop in you place and let them check and fixed the problem.
It is sounding like when the laptop is turned on and heats up a bit, the line appears? Sounds like one of the panels is going bad or atleast has developed a problem.
below are some tricks you can try to lessen the annoyance of the line.
Dual-Scan STN displays are composed of 2 panels behind a single protective
panel or screen. Because you are looking through the protective screen the
display appears to be one large panel even though it is not. There is
a physical separation line (gap) at the point where the two panels meet.
When the computer is on and being viewed it is not unusual to see the
visible separation line with the Dual-Scan STN displays. The line, actually
the fine gap between the display panels, appears because the color and light
pixels cannot run along the very outside edges of the panels. This line
(gap) between the panels can be seen as a fine gray line and is most
noticeable when viewing on a screen with a white or light background.
Note the line may not be as noticeable when the screen is displaying certain
colors or darker backgrounds.
It is not possible to completely eliminate the line but there are some
things you can try to reduce it's visibility.
1) Lower the display brightness/contrast. The brighter the backlight the
more noticeable the line.
2) Use Wallpapers and Screen savers that use darker colors.
3) In the Control Panel/Display applet under appearance try different
combinations of color schemes for your Window and Background choice
Let me know what happens.