Question about Linksys VOIP VONAGE PHONE ADPTR 2-PORT PAP2 Router

1 Answer

Can't connect reliance ec325 on ubuntu7.1

PPP daemon has died = A modem hang up the phone (exit code = 16). Now, I change my papsecrets and chap-secrets permissions, rw, are only for user. But no connexion ... Can you help me ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

This can be a real challenge.
If you cannot get on, then get the D-Link box as a quick fix.

You may , just may need to open what is called a UDP port for the router, which if you can get in then set the udp port to accept your vonage.
Vonage is pretty rock solid and most boxes have all udp ports open.

You issue is that you are using a PPP and that is a real source of trouble. You have to be able to tweak the incoming router box. Some ISP 's want you to use there phones and will block ports so you cannot do much.

Complain to your internet provider. Make them fix it or replace a box that will allow open communications with the Linksys / vonage box.

e

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

All lights of the modem are on but there is no internet connection although I reset the modem, turned off everything and unplugged and waited for 6 minutes. Besides, I went to the 192......., put the dsl...


1. Call DSL provider verify service is active. They should be able to ping their DSL modem.
2. If good service, plug your pc directly into dsl modem. If youre able to connect, then the router is bad. Youll need a new one.
3. If I read this wrong, and its the dsl modem that is not connecting, AND the service says its working, then it maybe the dsl network port has failed. In which case report it to your service provider and they should replace the unit for you.
4. You can try to unplug and replug the network cables, all of them. Or try different ones. Its just possible you are getting a poor connection at the wire terminator.

May 24, 2011 | Routers

1 Answer

Wireless icon shows full strength however internet does not work. Internet button blinks.


Has your wireless router/modem been configured to your ISP's instructions.
The blinking PPP or Internet LED means the wireless router is not connecting to your ISP.
You should also contact your ISP to get them to test the connection to your router/modem especially if you have a DSL modem.

Sep 20, 2009 | Westell Wirespeed VersaLink...

2 Answers

Unstable internet connection with a DSL2640U


I've heard that the issue can be resolved with a firmware update.

Go here to get it.

http://www.dlink.co.za/dsl-2640u_t.php

Jul 20, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Ec325 on ubuntu7.1 can not connect net exit code = 16


check the permissions for /etc/ppp/pap-secrets !!!

it shold be owned by root !!!
owner : root
access : read and write

group: root
access: none

others:
access: none

Jan 07, 2009 | Linksys VOIP VONAGE PHONE ADPTR 2-PORT...

1 Answer

No internet when router plugged in


I assume your modem is a ADSL or cable modem.
I suggest you first connect your modem to a computer and check if you can connect to the Internet. If you cannot connect then check status of the LEDs on your modem. If you don't have LEDs indicating the PPP/ADSL, and LAN connection then you have an ISP connection problem.
If you can connect to the Internet then your problem is either the router configuration and or LAN configuration.

Jun 15, 2008 | NetGear WGT624 Wireless Router

3 Answers

Configuring DLink Wifi router for Reliance broadband


quick questions

1. how did you setup your modem?..is it via PPPoA or PPPoE
2. can you please provide the model number of your modem

thanks


Apr 24, 2008 | Linksys Wireless-G Broadband Router

1 Answer

Ativa router and at&t


there is a link in the motorola UI that allows it to be put in "bridged mode" so you can configure the router. however, before you do this, i suggest you have to make the motorola (is it 2100?) modem work with your computer, connect this modem to your computer using ethernet connection, access the UI (192.168.1.254), type your user id & password in the login page, then connect. make sure that you are able to connect to the internet. then access the UI again, click on "advanced" choose PPP location. in the PPP location page, click on bridged mode, that will restart the modem automatically, & you will notice the modem's internet light will turn off. then you can connect the ativa router to this modem using manufacturer's instructions. you can now login to the router's page and make the necessary changes.

Apr 20, 2008 | Routers

1 Answer

Netgear Router WGR614 will not connect to internet


Hi,
Looks like when you reset the router you have lost all yur configuration and back to the default factory settings.

Bridge the 5100 first.
1. In your web browser browse to »192.168.0.1 This address will be located on a yellow sticker on the bottom of your modem.

2. The first screen will ask you for your Modem Access Code. This also will be located on the same yellow sticker.

3. Select Advanced from the blue buttons on the left.

4. Click the PPP locations button.

5. The modem may ask your for the Modem Access Code again. If so type it in again and click continue.

6. Select the radio button labeled, "Bridged Mode (PPPoE is not used)"

7. Click Save Changes.

8. A "PPP Location Warning" page will come up. Click "Change PPP Location."

9. A "Restart Needed" page will come up. Click "Restart"

10. Reboot your computer and and then connect the router

11.Configure the router for PPPoE using your ISP uid/pass

12.Configure your wireless using WEP

13.Desktop : Using Dell wireless client configure the client using the same SSID ,wep as configured in the router
Laptop : follow the same as desktop

(by default dell wirelesss client takes over the wireless configuration in dell pc.to disable it and use windows wireless client..control panel ->administrative tools -> services -> enabl2 wireless zero configuration)

14.after all configuration shut the desktop,laptop,router,mdm and pwr them in seg..first modem and then router and then your desktop or laptop

Cheers !!!

Feb 24, 2008 | NetGear WGR614 Router

1 Answer

Wireless issue.


1. Connection of phone line, ethernet and power adapter
2. Indicator light: POWER: green; Ethernet: blink; DSL: green; Internet: blink or red
3. Open IE browser.
4. address: 192.168.1.254
5. Click "Run System Setup Wizard"
6. Log-in with preset password: admin. Or change password: click "I forgot the password." Under question "Here’s a hint for the password wedding date", click "I still can’t remember the password.". Then Reset System Password by enter System Key which locate on back of the Router (like: [1234567890]), and your new password, then click "Submit"
7."Set Up Your 2700HG-B Gateway" screen. Keep default "Key Code". Click "Next"
8. "Time Zone". Select your time zone,then click "NEXT"
9. "Set Up Connection Info". Enter "PPP Authentication" information provided by internet service provider. "Username", "Password", and "Confirm Password", then click "NEXT"
10. Screen "Connecting" running...
11. Auto turn to screen "2700HG-B Gateway Setup Complete", click "FINISH", or "EXIT" to complete setup or "Register" to register with 2WIRE on line.
For a more detailed first time install no software needed check this link:
http://www.dslreports.com/faq/14083
Enjoy!
please vote...

Feb 06, 2008 | 2wire 2700HG-B Router (2700HGB)

1 Answer

ISP SBC SpeedStream 5100b Modem Causes Install and Connection to Fail


Symptoms * You have a new router, and cannot get online to the Internet. AND * The Setupwizard will detect dynamic IP even though you have a PPoE connection. (Going to router status on the administration page, there is a private IP address on Internet port. 192.168.x.x range.) Cause The SBC DSL modem SpeedStream 5100b, used on new DSL and Yahoo SBC DSL installations since Feb. 2004, causes the NETGEAR router Setup Wizards to fail, and prevents routers from connecting to the Internet. This problem affects many router brands. The modem can be distinguished from the earlier 5100 by a 5th light labeled "Internet". The SpeedStream 5100b's default configuration is "PPPoE on the Modem" ? matching a built-in PPPoE client convenience feature that sends login ID and password to SBC. To Work Around These Issues, Configure the Modem for Bridged Mode Note: In Bridge Mode you cannot to connect to the modem's configuration menu, except by resetting it as described below. 1. Disconnect the router from your network, and connect the computer directly to the SpeedStream modem 2. Open an Internet browser. 3. Type 192.168.0.1 in the browser address field and click Enter. The modem displays a configuration menu. 4. Click Advanced. 5. Enter the "Access Code" printed on the bottom of the modem. 6. Click PPP Location. The PPP Location screen appears. 7. Select Bridged Mode (PPPoE is Not Used). 8. Click Save Changes. 9. Connect the router between the computer and the modem. 10. Power off the modem. 11. Power off the computer. 12. Connect the Internet port of the NETGEAR router to the Ethernet port of the modem. 13. Connect the computer to a LAN port on the NETGEAR router. 14. Power on the modem and wait for 2 minutes. Don't go to the next step until this is finished. 15. Power on the router and wait for 1 minute. Don't go to the next step until this is finished. 16. Power on the computer. 17. Log in to the router by typing 192.168.0.1 in your browser. 18. When prompted, using lowercase letters, type admin for the user name, and password for the password. Some older routers use 1234 for the default password. If you forgot your router password see http://www.fixya.com/ThreadView.aspx?thid=102081&prdid=252188 19. Use the Setup Wizard to connect to the Internet. To Reset the Modem To Enable Access to the Configuration Screen 1. Disconnect the computer from the modem. 2. Power off the modem. 3. Power off the computer. 4. Connect the Ethernet port of the modem to the computer Ethernet port. 5. Power on the modem and wait for 2 minutes. Don't go to the next step until this is finished. 6. Power on the router and wait for 1 minute. Don't go to the next step until this is finished. 7. Power on the computer. 8. Open an Internet browser. 9. Type 192.168.0.1 in the browser address field and click Enter. The modem displays a configuration menu. 10. Click Advanced. 11. Enter the "Access Code" printed on the bottom of the modem. 12. Click PPP Location. The PPP Location screen appears. 13. Select PPPoE on the modem. 14. Click Save Changes. 15. At the login screen type in your SBC member ID and password (which is usually the primary email address on the SBC DSL account and the password for the primary email address). 16. Click Connect. * If successful, a screen appears reading "You Are Connected", and the Internet light goes solid green. * An error will display if the username or password is invalid. * If there are other problems the message "The DSL connection is down" appears.

Feb 19, 2006 | NetGear FR114P Router

Not finding what you are looking for?
Linksys VOIP VONAGE PHONE ADPTR 2-PORT PAP2 Router Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...