Question about NetGear WGR614 Wireless Router

1 Answer

Sierra Wireless AirCard 595U And PS3

Im using Wireless aircard 595u and want to hook up my PS3 how do I go about doing this? This is what I have: Netgear router, Netgear Wireless USB Adapter and a Networking cable. Help Before my son drives me crazy.

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,272 Answers

I understand that you want to connect the PS3 using the Wireless card and NETGEAR card. Please note that the setup you have will not work for internet access. You can not configure the Air card to work with NETGEAR router. you need to have wih a broadband connection available for this router to connect to internet.

Once you have the router configured with Internet access then you may either connect the PS3 wired or wireless to the router, like you connect a desktop or laptop to the router.

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to hook up a wireless router to my sprint sierra wireless aircard 595U. How do I do it?


Actually you hook your aircard to the router...
When you turn on your device, it will detect the network being broadcast by your router. The router broadcasts it's SSID (network name) and this will appear on your screen as one of the networks available in your area. Select your own networks and click connect. You will need your WEP (network key) to logon on though so make sure you have this ten letter code before you start.

Apr 13, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I want to hook up my ps3 using my 595u sierra wireless air card how do i do it?


You'll have to set up "Port Forwarding" on your router.

Click here to see a picture of which ports to setup under "Port Forwarding" for your router and the PS3.

Here are the settings that you should use when you setup your PS3 with a static IP:

IP Address: 192.168.1.200 (Same as the one you used for Port Forwarding)
Subnet Mask: 255.255.255.0
Default router: 192.168.1.1
Primary DNS: 192.168.1.1
Secendary DNS: 192.168.1.1

Jan 13, 2010 | NetGear WGR614 Wireless Router

1 Answer

Necessary equipment to create an Access Point using Sprint Card


Yes, you just need a Cradlepoint Router. The model you need just depends on the card you have. These routers convert your Sprint card to both Ethernet or WiFi internet that you can share with multiple computers / Wii / iPod Touch. See http://MoreMobileInternet.com/evdo-mobile-router to see the 4 routers plus how-to videos, and Sprint aircard compatability lists.

Jan 20, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

I do not have a router because i live in the country and the only way i could go was a sprint aircard and i wanted to see how i could use that to connect the internet to a ps3


You will need a second Wireless LAN Card or USB Wireless device for the P3, then install all SW for the devices, set BOTH computers to have the same workgroup name (Rt click My Computer, Properties, Computer Name, Change) then reboot both boxes.

Log onto the Aircard box
Goto to Start, Settings, Networks and Settings
Double click Aircard
Click Properties
Click Advanced tab at the top
Click Allow other to share
Click settings
Pick your poison
Add any extra you need
Click OK 2x

Goto start, Run and type cmd
type ipconfig /all
write down settings

Goto P3
goto Start, Settings, Networks and...
Double click the WLan icon
click properties
On the top scrollbar find TCP/IP and highlight it
click properties
change IP to Use this IP and set to same as Aircard +1
Massk is same
Gateway is same
DNS is same. If no DNS make this PC same as Aircard IP

Goto start, Run and type cmd
type ipconfig /all
write down settings

Type PING www.xxx.yyy.xxx (IP of Aircard to see if P3 can SEE it
if OK, then open Browser and come to this site ;-)
If not OK (Ping timeout)....

go back to Aircard PC
Click Start, Settings, Networks and Settings
Right click Aircard
Click Properties
Click Advanced Settings
write down all these

WLAN protocol: 802.11a,b,c,g....
Channel
SSID
Encryption type (changge if P3 does not support)
Password (copy to .txt file and save to memstick or floppy)


Go back to P3 and do same
Then click scan for hosts
find your Aircard name
Click connect
copy/paste ot type in Password from Stick or floppy

try open browser again
Easy!

Jan 17, 2009 | NetGear WGR614 Wireless Router

1 Answer

Can i hook my aircard up to this router


If meaning aircard (cell phone internet card) No because they use cell phone technology and run on a different frequency.
That router will take all wireless a/b/g cards available at most retailers for relitivly cheap now

Sep 15, 2008 | Linksys Wireless-G Broadband Router

1 Answer

How to connect a wireless card to ithernet


There are routers you can purchase that will allow your aircard to plug-in to it as opposed to your laptop. Most companies charge you alot of money for going over there limits on usage so becareful. I had a friend that got charged over $900 due to excessive usage.

May 29, 2008 | Actiontec GT704WG Wireless Router...

2 Answers

Sprint aircard 595U to belkin router model no# F5D7230-4


Try connecting the sprint card to your router's internet port. You will need a usb-to-ethernet adaptor, along with a networking patch cable, to connect the sprint card to the router.

Then either connect to the router with your two computers using cables, or wireless. If using wireless, you will need wireless adaptors for each of your computers, preferrably Belkin brand to ensure compatibity.

Apr 10, 2008 | Belkin (F5D7230-4) Router (587009)

1 Answer

Hooking Sprint aircard to Wireless Boroadband Router


You could do this, it would be a bit of work! You would have to dedicate the computer with the sprint card to provide the internet connection to your router, which would then supply all the other computers with internet.

Assuming you have windows XP or Vista on the machine with the sprint card you would enable Internet Connection Sharing, which would provide an internet connection into whatever is plugged into the ethernet port, your router.


Hope this helps!

Feb 13, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...