Question about Sony Ericsson Walkman W810i Cellular Phone

2 Answers

Can i get a new mains charger for my 8i0i?

My phone is not charging very well i'm not sure if the battery is dying or if the charger lead is not working is it possible to replace either of them

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Sony Ericsson Master
  • 1,001 Answers

Quick Charge 2.0 2port QC2.0+4port USB Charger 5V 9V 12V 60W USB Fast Charger for Mobile Phone Chornic Quick Charge 2 0 2port QC2 0 4port USB Charger 5V 9V 12V 60W USB...

Posted on Dec 16, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Ericsson Master
  • 14,641 Answers

Please try it My Dear Brother:


First Option:
mostly nokia chargers doesn't make problems...
just try the following..
connect ur mobile with a system (usb cable)...
found out whether it is charging or not...
if the same prblm appears then there is a prblm in ur cell phone or power jack(socket)...
if it charged with usb cable buy a new charger
Please change Phone Bettery and check the charging
IF Charging Problem not Solved So

Second Option:
Your Phone charging IC Fault So Please change charging IC
And charging Problem will Solved Quickly

Posted on Dec 06, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: battery charging

Sony ericsson phones have a weird way of diconnecting the charger from the phone, u have to pull up at a 45-50 degree angle to release the cable, perhaps you have accidentally twisted the pins inside the actual phone, or the may be dust obstructing the pins in the phones socket

Posted on Jul 27, 2007

Bajanguru
  • 7752 Answers

SOURCE: Sony walkman phone faulty charger connection so can't charge

you need to take the phone to a mobile service center and have them service the charger port

Posted on Nov 30, 2008

ghetto0802
  • 6 Answers

SOURCE: sony ericsson W901i wont charging

replace the plug in of the fon..it cost about RM30

Posted on Jul 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my kymco scooter engine stopped running after coming to a stop.


You have either run out of fuel, a fuse has blown, or and most likely the battery on your scooter has died. Most batteries nowadays last between 2 and 3 years then they just give up the ghost. Do not bother trying to charge it. Get a new one make sure it is filled correctly and put it on charge. Donot use a car charger only use a dedicated charger for motorcycle batteries max output 1 amp.

When you remove a battery undo the negative lead first, when you refit a battery connect the positive lead first.

Please be aware: -
Never try to jump start from another vehicle you will fry the battery and possible the whole electrical system.

Oct 19, 2014 | Motorcycles

2 Answers

Battery not charging. put new battery.still not charging.


Check the stator and voltage regulator One or both of them isn't working. Or if you're lucky, the regulator came unplugged from stator. The connecion is on the left front of the primary cover. Just follow the wires from the regulator and you will see it. Good luck!

Oct 27, 2012 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

The charger that comes with Homelite 24v mower is crappy. I've gone thru 3 of them. What's a better alternative?


I have used a DieHard portable battery charger (model 200.71222) for several years to recharge my 24-volt, 18-year old Craftsman mulcher, model 315.370270. This is after the on-board charger died. I just disconnect the link between the two 12-volt batteries and remove all other battery connections. Then connect the charger leads to the positive and negative terminals on one of the batteries before plugging in the charger. I put the settings on the charger at conventional low maintenance and 2 amps. Charge one battery and then the other (assuming you have two 12-volt sealed lead acid batteries like my mower). I use binder clips 530-t.jpgfrom an office supply store to hold the battery wires on the terminals when I'm mowing...makes it simpler to remove and reattach for charging instead of the nut-and-bolt connectors that came with the mower.

May 14, 2012 | Garden

1 Answer

I have a homelite 720 generator but cant fingd the instruction manual and i need to know if the charger leads only charge a battery or can be used as jump leads i know this might sound stupid but i wo


I can't find any reference to a Homelite model 720 generator but most battery charging systems do not supply enough amps to run a car starter. Battery chargers usually work in the two (trickle) to ten amp range. Car starters need way more amps to have enough power to turn an engine over, depending on the size and number of cylinders in the motor. Some chargers have a switch with a 60 amp 'start' position to help the battery turn the motor over, but without that there is little chance the charger side of your generator will supply enough amps to help your battery.

Feb 21, 2012 | Cars & Trucks

1 Answer

I don't have a manual for my small Black & Decker Smart Charger. I'm trying to charge the battery on my '07 Honda Rebel 250cc. It has settings for 2/6/12 volt batteries. How do I hook it...


Hi,

You just need to set black & decker charger to 12V . Don't make mistake while connecting + / - leads. + lead usually come with Red color cable. You can use the AVO tester to justify the lead cable. The charging time is normally about 10 -12 hours (or just just check the status on your charger display). If your charger does not has trickle charge facility, you have to disconnect your charger after 12 hours continuous use.

Also, you can find the guidance about your charger here :

www.blackanddecker.com/power-tools/VEC1087CBD.aspx

Regards

Sep 22, 2011 | Honda CB 250 Motorcycles

1 Answer

My nokia 2690 is not getting started (on) & not supporting the charger also.its not getting charged.


It sounds like your battery has died. The batteries don't last forever and they eventually start to hold less and less charge. Did you notice the battery starting to last a shorter and shorter time? You probably need a new one.

Jul 22, 2011 | Cell Phones

1 Answer

My samsung gt 15500 won't charge up. It was working fine 2 days ago and yesterday i brought the usb lead to work with me to charge it with my computer. Nothing happened when i plugged it in so i...


If the phone was totally dead before it refused to charge initially, then the refusal to charge is due to the fact that there was no residual charge left to bring it to a charge, because the battery completely died.
To fix it, kick start the charging process.
Remove the battery, and using a universal charger (desktop charger) charge the battery for say 10 minutes, before re- inserting the battery to the phone and continuing with the normal charging process.
If this does not work out, then problem is with the charging port. It has to be replaced. This can be done by nearby local phone repairers.
Hope it helps?
Success.

May 12, 2011 | Cell Phones

1 Answer

When I plug in my Jet 3 Ultra 4500, it seems to charge - the charging lights come on - but it never charges. In fact, I can't get it to move at all, even when plugged in. I think I am using the...


when you plug in the charger do you get any amp reading on the meter located at the rear of the chair near where the charger cord plugs into the chair. When you plug in the cord the meter should deflect and read 6 amps or so. If you aren't getting any deflection of the amp meter then either the batteries are dead or the charger is bad. If you have a voltmeter you can set it to 200 volts dc and plug the leads into the charger port located under the front of the joystick Plug the leads into the 2 outter holes of the port with the charger plugged into the wall you should be reading 27-30 volts. Unplug the charger and you will be reading the battery voltage and fully charged they should read 25-27+ volts. If you aren't reading 25-27 volts without the charger plugged in you will need new batteries( anything less than 10 volts will not let the chair turn on) if you aren't getting 27-30 volts with the charger plugged in then the charger is bad and you can get or borrow an off-board charger and charge the chair thru the joystick port Hope this helps

May 07, 2011 | Jet 3 Ultra Power Chair

3 Answers

Hi have mini iphone (ka08). Was working fine but battery ran out and will not charge switch on etc! Have replaced battery and charger..still no life!any ideas??


Mine does the same thing, but i play with the female part of the charger ( the slot inside the phone ) BAM it starts working again. Its just a really poor job on the charger part its really cheap.

Nov 24, 2009 | Cell Phones

2 Answers

No power


Make sure you have an original OEM charger for the MDA. Many of the knock off chargers don't provide the right amperage for the device. What happens is that since the phone is completely dead, it can't regulate how many amps the battery should get during the charge and an incorrect charge current won't charge the battery. I'm guessing that someone sold you a Motorola RAZR charger or another knockoff made for the RAZR. This might charge your phone when the battery is working, but not when it's DEAD. Also you won't have luck plugging it into a computer USB cable because, again, the phone can't tell the computer what charge to send and most computers only produce <0.5 amps in the USB port.

Get a charger that states it is an OEM (original eqipment manufacturer) device or one that is specifically designed for the MDA (or Cingular 8125). eBay is full of them.

Bad charger (probably won't work for a dead battery)

Good Charger (correct amperage and designated for the MDA)

Jul 08, 2008 | T-Mobile MDA

Not finding what you are looking for?
Sony Ericsson Walkman W810i Cellular Phone Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Sandeep Shenoy

Level 2 Expert

187 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...