Question about LaCie Space 2 (301515EK) 1000 GB Network Storage Server

Open Question

My Lacie network space 2 doesn't download files through download machine

My Lacie network space 2 doesn't download torrent files through download machine. Ive forwarded the TCP port to the network space IP adress but its still not working. It says download in progress, but it's still on 0%. I've tried multiple downloads.

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Lacie 2 big does,nt boot

Hmmm, reseting worked on mine. Identical symptoms except light stayed blue, not red. Unable to power down.
Before trying to get the drive working I got the data off using the procedure in the second post of this thread:

http://www.linuxforums.org/forum/peripherals-hardware/126831-reseting-lacie-2big-network.html

You need a linux system running. Maybe a live cd will do. I installed on an old IDE drive I had.

I then rest the decive using this procedure from Lacie and my drive is working again. Worthless though, because I can't trust it.

The procedure below will reset the 2Big Network to factory settings:
IMPORTANT NOTE: Following the procedure below can ERASE ALL DATA on the drive. Prior to following these directions, verify important data is stored securely on a different storage device.
Switch the drive OFF. Once it has shut down, ensure the power switch remains in the OFF position.
If the drive is in the SAFE mode, move the RAID switch to the BIG mode.
PRESS AND HOLD the button on the front. MOVE the power switch to the ON position. The light on the front of the drive will start blinking.
Once the light stops blinking, RELEASE the front button.
When released, it will begin BLINKING AGAIN. When it stops, PRESS AND HOLD the front button. The light will begin to blink again.
When the light stops blinking, RELEASE the button. The drive is now resetting itself. Switch the RAID selector back to SAFE if desired.
To restore data if it was lost during the process, recreate the shares and users on the unit prior to the reset. Any firmware updates applied will need to be applied again.

Posted on Oct 24, 2009

  • 1 Answer

SOURCE: Lacie NAS doesn't appear in network

Have you installed the lacie network assistant?

Posted on Sep 17, 2010

  • 34 Answers

SOURCE: windows vista is not detecting lacie network space

In your office network, for sure, you have a DHCP server who gave the IP addresses to all devices for that network and this seems to be the reason for why you could see your NAS. On home, you also need a DHCP server. You don't say anything about you home network. The best idea is to just make a temporary network with 2 devices: your computer and your NAS by connecting the NAS directly to your computer's network adapter, set the IPV4 IP for that adapter to the same class addresses as your NAS was set by default (usually NAS had "192.168.x.y" where "x" could be 0, 1 or 2 "y" could be any value between 1 and 254, but mostly, 1) and try to access it via http to manage him (need a user name and a password). For NAS default address and username and password, consult NAS user manual. Access it with from your preferred browser using: \\192.168.x.y
Once you gain the control, cut off his DHCP service and tell him to accept the IP address from the network defined DHCP. (btw: one normal DHCP server is allowed on one network! Cascaded DHCP also is allowed, but it's a little bit complicated)
Good luck!

Posted on Jun 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NAS Disconnecting from Network


I hope the brothers who has a program Printer Definition "murtec mfx 2010" Windows 7 download link here Vlada graciously

Mar 10, 2014 | LaCie d2 Network v.2 - 3TB

2 Answers

How to download online videos on my uTorrent


Set up uTorrent with a different folder for each of downloads, finished, torrent loader, torrents, finished torrents, etc. Just make them sub-folder of a BitTorrent or similar folder. Set up your browser to download any .torrent or magnet file into the "torrent loader" folder.

Go to a torrent site like eztv.com or eztv-proxy.net or piratebay.se, find the torrent you want to download & download the TORRENT file. It will drop in the "torrent loader" folder & uTorrent will pick it up from there & start downloading the actual file you wanted.

You can download as many torrent files as you want. uTorrent will queue them up according to your settings.

Sep 20, 2013 | utorrent.com

1 Answer

Nas unreachable on network


Try connecting a USB mouse & keyboard DIRECTLY to the back of the server (plugging the monitor directly into it as well) then login directly instead of over the network. Repair may be possible if successful.

Dec 16, 2012 | LaCie Space 2 (301515EK) 1000 GB Network...

1 Answer

PC doesn't recognise hard drive connected via front panel usb?


Use one of the rear USB ports. Mind you, my PC won't deal with it when connected to any IUSB port although it's fine when connected to the router. This is driving me mad...

Nov 02, 2011 | LaCie Space 2 (301515EK) 1000 GB Network...

1 Answer

Windows vista is not detecting lacie network space 2 i am trying to install a lacie network space 2 (1T) on a home network. i use windows vista icw avg free virus software. i installed the latest...


In your office network, for sure, you have a DHCP server who gave the IP addresses to all devices for that network and this seems to be the reason for why you could see your NAS. On home, you also need a DHCP server. You don't say anything about you home network. The best idea is to just make a temporary network with 2 devices: your computer and your NAS by connecting the NAS directly to your computer's network adapter, set the IPV4 IP for that adapter to the same class addresses as your NAS was set by default (usually NAS had "192.168.x.y" where "x" could be 0, 1 or 2 "y" could be any value between 1 and 254, but mostly, 1) and try to access it via http to manage him (need a user name and a password). For NAS default address and username and password, consult NAS user manual. Access it with from your preferred browser using: \\192.168.x.y
Once you gain the control, cut off his DHCP service and tell him to accept the IP address from the network defined DHCP. (btw: one normal DHCP server is allowed on one network! Cascaded DHCP also is allowed, but it's a little bit complicated)
Good luck!

Jun 25, 2011 | LaCie Space 2 (301515EK) 1000 GB Network...

1 Answer

I have a Lacie wireless space network drive (1TB) connected directly to my router. I'm only using the switch functionality and have my pc connected to the internet through one of the 3 ports on the...


Here is what LaCie suggests about this issue:- first backup any data you have copied on Wireless Space. You can also backup your configuration: from "configuration" tab of "Support" widget, click "save" button next to "Configuration file", it will download a backup file.
- still in "configuration" tab of "Support" widget, tick the third box labeled "Restore device to factory state (data erased)", or any equivalent quote in selected language, and click apply
- the device will reboot, rebuild hard drive image, then reboot on default state. The issue is definitively fixed
- it is recommended to apply latest update downloaded from LaCie website
- you can restore previous configuration in "configuration" tab of "Support" widget, click restore and select previously downloaded backup file

Feb 07, 2011 | LaCie Wireless Space 2TB Wireless Storage...

3 Answers

How do i download movies using mtorrent


  1. You use special torrent search engines to find .torrent text files around the Net. A .torrent text file functions as a special pointer to locate a specific file and the swarm of people currently sharing that file. These .torrent files vary from 15kb to 150kb file size, and are published by serious Torrent sharers around the world.
  2. You download the desired .torrent file to your drive (this takes about 5 seconds per .torrent file at cable modem speeds).
  3. You open the .torrent file into your torrent software. Usually, this is as simple as a a double-click on the .torrent file icon, and the client software auto-launches. In other cases, this software will even open the torrent file for you.
  4. The torrent client software will now talk to a tracker server for 2 to 10 minutes, while it scours the Internet for people to swarm with. Specifically, the client and tracker server will search for other users who have the same exact .torrent file as you.
  5. As the tracker locates torrent users to swarm with, each user will be automatically labeled as either a "leech/peer" or as a "seed" (users who have only part of the target file, versus users who have the complete target file). As you might guess, the more seeds you connect to, the faster your download will be. Commonly, 10 peers/leeches and 3 seeders is a good swarm for downloading a single song/movie.
  6. The client software then begins the transfer. As the name "sharing" implies, every transfer will happen in both directions, "down" and "up" (leech and share).
    *SPEED EXPECTATION: Cable and DSL modem users can expect an average of 25 megabytes per hour, sometimes slower if the swarm is small with less than 2 seeders. On a good day with a big swarm, however, you can download a 5MB song within 3 minutes, and a 900MB movie within 60 minutes.
  7. Once the transfer is complete, leave your torrent client software running for at least two hours. This is called "seeding" or "good karma", where you share your complete files to other users.
    Suggestion: do your downloads just before you go to sleep at night. This way, you will seed your complete files, you will increase your upload/download ratio, and you will have complete downloaded files by the time you wake up!
  8. Movie and music plug-ins: you will likely need to install media players and updated codec converters to play your downloads:
  9. Enjoy your movies and songs!
  10. Fair warning: you will want a second hard drive once you start serious torrent downloading. Songs and movies require large disk space, and an average P2P user commonly has 20 to 40 GB of media files at any one time. A second 500GB hard drive is common for serious P2P users, and the recent low prices on hard drives make it a good investment.

Jan 27, 2011 | Health & Beauty

2 Answers

Usv pen drive of lg dvd model dv456 is not accessing .avi files


you need to format the .avi files to mpeg format or any other supportable formats by your computer. to format the files download format factory.

1)go to www.google.com

2)type u torrent & download from the available sites.

3)install u torrent.

4)now go to www.torrentz.com

5)search for format factory.

6)download that is verified. if none is verified, download the recent uploaded file.to downloadf go to any of the the available sites and download the torrent file. install it or open it through u torrent. press 0k >ok.

7)now wait for the download to complete.

8)right click on the file and select open folder. install.

9)format the file. and copy it to pendrive.now go for it & enjoy.

Dec 24, 2010 | Televison & Video

1 Answer

File transfer size limitation for LACIE HD


hi

can i suggest that you use winrar to divide the file size of your file that you want to transfer to your lacie. this might work.

download winrar @ majorgeeks.com

but if you LACIE still says that it does not have any disk space left...i would suggest that you reformat the HD instead. but make that a last resort...

hope this helps

Jan 21, 2008 | LaCie Design by F. A. Porsche 160 GB Hard...

Not finding what you are looking for?
LaCie Space 2 (301515EK) 1000 GB Network Storage Server Logo

Related Topics:

410 people viewed this question

Ask a Question

Usually answered in minutes!

Top LaCie Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Raj Patel

Level 3 Expert

905 Answers

Tony

Level 3 Expert

2600 Answers

Are you a LaCie Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...