Question about Lanier Office Equipment & Supplies

Open Question

My lanier ld425c is showing offline all sudden and my computers are not connecting to print

Came in this morning and we had unplugged the copier, printer ect..wen plugged back in to use..it would print anything...i turned it off..then back on still wouldn't, I used a usb wire and plugged in to computer, then it printed...I started looking at the other computers and its all the sudden says offline, so my computers arent connecting to the wireless....i go into the copier and push printer button and make sure the online is lit up under that part and it is..it doesn't show offline..i took the printer out of my laptop and tried to put back in my searching for wireless printer in the office and it doesn't find it..where normally pops right up and is very easy install...Im at a loss!

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

how whee
  • 8 Answers

SOURCE: D-Link Print Server Compatibility issues

DP-300U Print Server is not compatible with Sharp AR-5320. Pls check D-Link website on the list of compatible printer. For USB Print Server that is compatible with Sharp AR-5320 try Intellinet.

Posted on Feb 21, 2008

rakeshpramod
  • 234 Answers

SOURCE: Printer keeps saying insert memory card

The message is not an error message and does not indicate an issue with the product. The message is designed to be an invitation to print photos from a memory card. Follow these steps to insert a memory card into the product. For more information please check the link bellow: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01436439&cc=us&lc=en&dlc=en&product=3194498 Good Luck

Posted on Sep 28, 2008

  • 1 Answer

SOURCE: Brother mfc 665cw connection error

I have a MFC665CW connected wirelessly to a router and a pc connected by ethernet to the router, with a broadband satellite receiver connected to the WAN port of the router (plan to add another PC to the network soon, so have set up the network in advance). I had trouble with the brother status montior flashing 'Ready' then 'Offline' all the time, when I knew the printer was always connected to the network. I had set up the DHCP stuff on the router to allocate IP addresses to everything that connects to the network, like you are supposed to. I updated drivers and firmware, but the problem continued.
When I checked the router status log I saw that one MAC address in the network was making a DHCP request every 5 minutes (i.e. it was asking the router to allocate it an IP address at regular intervals). Every time the router answered that request it made the Brother status monitor go 'offline'. The MAC address was my broadband modem. I fixed the issue by setting the router to allocate a static IP address to the MAC id for my broadband modem (in the DHCP setup section in the router's admin interface). That stopped the dynamic IP address requests from the broadband modem and the Brother status monitor works fine now. I also set static IP adresses for the printer and PC to be on the safe side, although I don't think that matters.
So, check your network log and look for a MAC id that makes regular DHCP requests and then set a static IP address for it. Hope this helps you guys too.

Posted on Oct 09, 2008

mickspaceNET
  • 115 Answers

SOURCE: printer busy/or error

Sounds like your machine is using DHCP, not a static IP address?

Print your network settings from the Printer, then try to Ping from a computer on the network.

Check the Network setting of the machine, make sure it is set to a fixed (static) IP Address.

If this is the problem, you can go into your PC printers port and change the port to the reassigned IP Address of the machine.

If you reinstall the drivers then you will have this installed twice, one will work one will not, so delete it from the printers folder before you reinstall before you reinstall

Posted on Oct 25, 2008

XeroxHelp
  • 4 Answers

SOURCE: HP Photosmart Printer, Mac won't recognize with USB

Sounds like their is not communications between your printer and computer. Could be a bad USB cable - swap out and see if that fixes it. If not it could be a faulty USB port on the computer or printer. You can check the computer USB port by connecting another device, but there is no way to check the HP's USB port. I would also check printer USB port for dust bunnies! If you're not able to resolve, I think it is time for another printer.

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to print enevelopes without them jamming in a lanier ld425c


in bypass put envelopes in short edge first, push the # button, select size of envelopes and OK it, (needs to be told of size)-Carl

Aug 28, 2014 | Lanier Ld445c Ld435c Ld430c Ld425c Ld420c...

1 Answer

Why after we change the toner it will not print


after refill the toner may be bias charging roler is not proper fiting
or toner cartridge is not proper insert

Aug 18, 2014 | Lanier Ld445c Ld435c Ld430c Ld425c Ld420c...

1 Answer

Lanier LD425c touch screen does not function


You can try to adjust the touch screen > press the yellow clear button then 1993 & press the stop button three times & follow the display screen. Odds are you are going to have to replace the touch screen, the adjustment will not last long....Good Luck

Dec 22, 2012 | Ricoh Lanier Ld445c Ld435c Ld430c Ld425c...

1 Answer

Why am I getting lines on my prints when I go thru the top feed of my Lanier LD425C?


Clean the **** glass. It is a long skinny glass to the left of the big rectangular glass under the feeder. Clean it and your problem should go away.

Aug 30, 2012 | Lanier Office Equipment & Supplies

1 Answer

I have a lanier ld425c that i purchased after a company went out of business. the copier turns on andcopies fine. the control panel touch screen does not work. any suggestions


Hello!
I am not 100% sure but i think you can calibrate your touch panel.
Follow this steps:
- Press yellow key.
- On the key pad press 1999.
- Press Red Key five times.

After that you will see the option to calibrate your panel. You just need to follow the wizard.

If you have any dought reply to me.

See you!

Jul 15, 2011 | Lanier 1205 Copier

1 Answer

My printer is showing offline. I have unplugged and checked all connections, and have restarted the computer. The printer does not print a test page.


Try to right click your printer's icon. Check if the printer is set as the default printer or check if the printer is set to function online. It will not print if it was set to function offline.

Nov 22, 2010 | HP LaserJet P2015 Printer

1 Answer

The printer will not print. it shows that it is offline. i went to the "services" menu and restarted the printer spooler and the printer went to ready but it wouldn't print and then went back to offline....


First thing to do here is to unplug the printer from the computer and restart the computer , then once the computer is already back that's the time you connect the printer back and lets see if the printer will be detected by the computer, if still not and printer is still showing offline, better go to control panel and gp to printers and faxes and click on add and follow the wizard to install a ewn printer that should correct the problem.....

Jul 09, 2009 | Canon imageCLASS D480 Black and White...

1 Answer

Service code 561 error


Hello sir; Just follow my direction, it will reset your machine;
1, press "clear mode", "107", then press and hold down "clear/stop" key.
2, touch "copier SP" on the screen.
3, enter "5810-001" press enter.
4, set value to 0, then turn power off and back on again.

May 15, 2009 | Lanier Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lanier Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

Brad Brown

Level 3 Expert

15441 Answers

George Mclaughlin

Level 2 Expert

339 Answers

Are you a Lanier Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...