Question about Buffalo Technology WHR-G54S Wireless Router (WHR2G54S)

1 Answer

Router stopped working.

I have a WZR2-G300N that has worked great since I purchased it about a year ago. All the lights are on like they have always been but I cannot get any internet signal through it. I hate to go buy another one without making sure this router is defective. Any advice?

Posted by on

  • eecom May 11, 2010

    Hi........do you mean the wireless signal has suddenly dropped - or that you can't get on the internet through the router, even if you have a wired connection? Thanks...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 10,406 Answers

Turn off your router.
Turn off your cable-modem (or ADSL adapter).
Wait 10 seconds.
Turn on your cable-modem (or ADSL adapter).
Turn on your router.

If you don't have access:

Turn off your router.
Wait 10 seconds.
Look on the back of the router for a small hole.
Straighten-out a paper-clip (invented in Norway),
and push it into the hole, and hold it in for 10 seconds.
This will "reset" your router to "factory" settings.
(This will lose all your "wireless-security" settings.)
Turn the router on.
From your computer, connect to the router's web-interface.
Re-instate the "wireless-security" settings.


Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dlink router dir-600 was purchased only last month. It was all working well until 3 days ago...the light in wireless icon and other LAN all stopped. Only power and Globe lights were Orange... no...


If you have ethernet cable, plug one end of cable into in available slot of router (LAN) and other end ont your laptop to see if you can get out Internet that way. If not, turn off you router, wait for a minute and turn it back on. If it works after the reboot, try wireless again to see if it works. Most of time, router just needs to be rebooted.
thanks

May 13, 2011 | D-Link DIR-615 Wireless Router

1 Answer

I installed my D-Link DI-784 six days ago. It's connected to a Dell 8100 running Windows 7. It worked fine until an hour ago, when it stopped broadcasting. The router is connected to a DSL modem. If...


It is possible that a neighbor purchased a wireless access point that it on the same channel and they are competing. Change your wireless channel. You could also try a hard reset. Instructions at D-Link's website. Good luck!

Apr 08, 2011 | D-Link (DI-784) Wireless Router

1 Answer

PC purchased last year had Norton installed. A few days ago Norton expired and ever since my wireless router no longer sends WiFi signals, WLAN light is out. How can I turn this feature back on? I've...


1.Router got a reset button in the bottom.Reset your router.Hope it will wok for you.
or

2.UNINSTALL THE WIFI ROUTER AND INSTALL IT.

3.CHECK YOUR POWER CORD TO ROUTER.

Feb 01, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

What us a network security key?


There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Jan 20, 2011 | Buffalo Technology AirStation Nfiniti...

1 Answer

Netgear DG834G router dropping internet connection


You could try a firmware update, if this is no better it may be time to ask your ISP for new router.

Aug 01, 2010 | NetGear DG834G Router

1 Answer

Hi i security enabled my router a long time ago and dont rem any of the info and now i want to use it at home instead of at office and i cant access it. can i still use this router? thanks i have a...


Yes, definitely you can use this router in your home aswell
If u can't access your router then try and reset it and reconfigure it with the help of a disk or Manually.

regards
TecKC

Apr 07, 2010 | Buffalo Technology AirStation Nfiniti...

1 Answer

Can't load the Buffalo Wireless N WHR-G300N router IP address


fingers crossed i maybe able to help you solve the problem if you still have it do you have msn were we can chat to resolve the problem or via email it may be easier

when you connect it to your computer via RJ45 cable right click on the network card and click staus to see your default gateway and is this the same address as you are trying to connect too to change the configurations.


Jan 23, 2009 | Routers

1 Answer

Lights are gone


Well, If You've Had It For Four Years, It Definitely Sounds Like Your Router Has Died So To Speak. Most Routers Only Tend To Last A Few Years Of Being On Constantly. I Would Suggest Buying Another Router Because The Cost Of Repairing This One Really Isn't Worth it. Good Luck, Brodey

Sep 15, 2007 | Siemens SpeedStream 2624 (SS2624) Wireless...

Not finding what you are looking for?
Buffalo Technology WHR-G54S Wireless Router (WHR2G54S) Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buffalo Technology Routers Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Joe Goldman
Joe Goldman

Level 2 Expert

330 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Buffalo Technology Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...