Question about Emerson Lc190em2 19" Class Lcd Hdtv

1 Answer

Channels will not program into tv so that my dvd player and Playstation2 will picture can be seen. I can hear both, but it TV is on wrong station and will not program in

I have dvd player and PS2 hooked up to tv, but cannot program channel to right channel. I can see and hear both dvds and games, but cannot switch from channels 3 to 4 to see picture

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Emerson Master
  • 14,553 Answers

You have a DVD player hooked etc to either channel three or four? Usually this equipment is connected into the Jacks on the rear of the set, that is to say hooked to a video input and not with the tuner, if hooked that way select the input with the remote for the set and see the picture....

Clarify how you are hooked and where

Posted on Dec 05, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 30 Answers

SOURCE: will not find digital channels

bad digital module on the main pcb

Posted on Aug 09, 2009

  • 111 Answers

SOURCE: How do I hook up my Wii to my 32

you might try tuning down on the channels. a lot of the time after you get to channel 2, the next thing will be the inputs of the TV. check the back of the TV and confirm what input you are using. good luck

Posted on May 04, 2010

freetek
  • 5568 Answers

SOURCE: model LD 200 EMB

This may sound stupid and not help anything but I would change the batteries in the remote first; that's the simplest possibility.

What the set is doing is selecting a function, the first is 'Auto tune' during which the set is looking for usable channels on the 'off air' (antenna) input. I suspect you have cable or satellite meaning that there will not be any signal at the antenna input and the set just looks at each standard channel frequency and then gives up.

The language thing; this is curious but also a sign that it has switched to the menu mode where you also need to be if you want to do a channel search on purpose.

If the remote is not at fault, then it is an internal problem you will not be able to repair on your own.
The circuitry that interprets the received infrared signal from your remote has started producing noise or the output from that after a decoder, has gone noisy and is just choosing functions on its own.

The blue screen is what most sets use as a default when no signal is found at any input.

Unfortunately. Emerson, RCA, Zenith and a few others are US names we once trusted but now have been acquired by Asian manufacturers who are building junk with labor pulled from the fields to assemble high tech gear.

Posted on Aug 27, 2008

  • 16 Answers

SOURCE: DVD stopped

replace the dvd main board mounted on top of the dvd player it has 6 ribbon cables connecting it to the dvd and the main board.

Posted on Oct 09, 2008

budmrtn
  • 11361 Answers

SOURCE: I am not receiving any digital channels over the

Did you set the TV to 'AIR' in the channel scanning on screen setup manual?

Posted on Oct 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV after removal of picturetube for playing music from DVDplayer


Why use the TV in hearing the sound from DVD
player. You can use some small speaker and connect it at the back of the DVD player.

Jan 07, 2010 | Televison & Video

1 Answer

My mad catz dvd2 remote has no number pad. How to program for tv


I cant find my tv code list for ma mad catz dvd 2 remote control. I have an old sharp tv. would you have codes that I could try, to be able to change the channels on my tv with this remote?

Oct 17, 2009 | Mad Catz DVD Remote for PlayStation2

1 Answer

PROSCAN 26" LCD TV with DVD won't show all the channels


bought 26 in pro scan tv can't figure out how to connect dvd player,craziest thing i've ever seen.please help

Mar 14, 2009 | Proscan 26LB30QD 26 in. LCD HDTV

1 Answer

How to set the telelvision to use a dvd,


On the remote ther is a tv/av button. Turn the DVD on and press play and the press that buttom on the tv remote and you will see your dvd playing. Have a good day.

Aug 04, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Sound problems with Insignia Flat Screen 37


It may be that the set is set for alt sound. go to the menu and set the audio to stereo. If the audio is set wrong it thinks you are set for spanish and if the broadcast is not in an alt language there will be no sound.

Jul 10, 2008 | Televison & Video

1 Answer

Cable box, digital service, channels not appearing


connect the RF lead from the wall to your cable box then out from that to your dvd then out from your dvd to your tv. now connect a scart lead from the cable box to AV 2 on the DVD then connect AV 1 on the DVD to your TV if you have a second scart on your tv connect that to the cable box. NOW on the DVD select AV2 now whatever is on the cable box will be recorded onto DVD/VCR. Put the DVD recorder into VCR mode and set it to auto tune all the Digital Video Broadcasts. You cannot physically tune the cable boxes own channels into the DVD via RF it has to be via a scart.

Apr 27, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

2 Answers

Free TV!! Help!


if you live in the uk you should be able to get a all in one controll to tune the channels in but if you can get those two channels you should get the rest but you will need to tune them in first this cant be done with out the controll

Oct 31, 2007 | Televison & Video

Not finding what you are looking for?
Emerson Lc190em2 19" Class Lcd Hdtv Logo

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...