Question about Philips GoGear HDD1830 MP3 Player
Triple Reset for Philips’ GoGear:
Disconnect the Go Gear from computer. Press the reset pinhole until the player turns off. Hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard. If this pop-up does not appear, reset the player again WHILE connected to the computer. Open the Philips Device Manager, and go to Repair Tab. Reset the player one more time while connected to computer. Follow the repair instructions.
After repair is complete, upgrade the firmware for this player. Will erase all the songs, but you should be good to go again.
-Tha Mp3 Doctor
Posted on Mar 07, 2009
Tips for a great answer:
Jan 31, 2010 | SanDisk Sansa e250 MP3 Player
Oct 18, 2009 | RCA M4204 MP3 Player
Feb 24, 2009 | Philips GoGear HDD1830 MP3 Player
Dec 06, 2007 | RCA Lyra RD2765 MP3 Player
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: