Question about HP Color LaserJet 9500HDN Printer

Open Question

Errore 49.4c02 service errore hp 9500 - HP Color LaserJet 9500HDN Printer

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pdouglasss
  • 125 Answers

SOURCE: hp laserjet 4650n

Hi 123sha:
49.XXXX
PRINTER ERROR
To continue
turn off then on
A critical firmware error has
occurred that caused the
processor on the formatter
to abort operation. This type
of error can be caused by
invalid print commands,
corrupt data, or invalid
operations. In some cases,
electrical noise in the cable
can corrupt data during
transmission to the printer.
Other causes include poorquality
parallel cables, poorconnections,
or home-grown
programs. On rare
occasions, the formatter is at
fault, which is usually
indicated by a 79 Service
Error.
1 Press CANCEL JOB to
clear the print job from
the printer memory.
2 Turn the printer off and
then on.
3 Try printing a job from a
different software
program. If the job
prints, go back to the
first program and try
printing a different file. If
the message appears
only with a certain
software program or
print job, contact the
software vendor for
assistance.
4 If the message persists
with different software
programs and print jobs,
disconnect all of the
cables to the printer that
connect it to the network
or computer.
5 Turn the printer off.
6 Remove all memory
DIMMs or third-party
DIMMs from the printer.
7 Remove all EIO devices
from the printer.
8 Turn the printer on.
9 If the error no longer
exists, install each
DIMM and EIO device
one at a time, making
sure to turn the printer
off and on again as you
install each device.
10 Replace a DIMM or EIO
device if you determine
that it causes the error.
Try new network card
pdouglasss

Posted on Jan 10, 2009

  • 334 Answers

SOURCE: Service Manual for HP 9500...

Hey there, if you go to the following link you can choose which manual you would like to download
seth

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18972&prodSeriesId=85318

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

59.62 error


hp color laser jet 9500 error 59.62 how fix

Jan 28, 2012 | HP LaserJet 9500mfp Printer

1 Answer

HP colorlaserjet 9500 printer giving me an error message 59.AO,please help.


This error is caused by a rotation error on the ITB (transfer belt).

From the HP Service manual

If turning the printer off and on again

does not resolve the 59.00 or 59.A0

error, remove and reinstall the image
transfer cleaner.

Post back if this does not resolve the error.

May 21, 2011 | HP Office Equipment & Supplies

1 Answer

Hp color lj 9500 printer 57.70 error


That error code indicates a failed fuser fan. You will need to get it replaced. PN: RH7-1522-000CN

May 02, 2011 | HP LaserJet 9500n Printer

1 Answer

Hp color laser jet 9500 hdn i have this message error 49.4c02


Unplug the printer from the pc or the network to clear the error, the upgrade the firmware.

Jun 09, 2010 | HP LaserJet 9500n Printer

1 Answer

Error code 57.70 on HP 9500 color printer


What is the code? This unit does not have a fan in the duplexer nor for the duplexer. The 9500 has a fan housing but there was never a fan put in by the design team. Give the code and I look it up to see the problem.

Apr 28, 2010 | HP LaserJet 9500n Printer

1 Answer

I Have Fault Codes on the Display.


Problem solve someone tried to print a PDF file which lodged the fault our It Dept deleted the print spool and Re-set the printer all ok.

Jan 14, 2010 | HP Color LaserJet 5550hdn Printer

2 Answers

49,4c02 error to continue turn off then on


I would try clearing your print que as it could be a corrupt print job and disconnecting your network cable and reboot the printer, make sure you have the latest firmware. hope this helps

Nov 24, 2009 | HP LaserJet 4700 Printer

1 Answer

Hp laserjet 4650n


Hi 123sha:
49.XXXX
PRINTER ERROR
To continue
turn off then on
A critical firmware error has
occurred that caused the
processor on the formatter
to abort operation. This type
of error can be caused by
invalid print commands,
corrupt data, or invalid
operations. In some cases,
electrical noise in the cable
can corrupt data during
transmission to the printer.
Other causes include poorquality
parallel cables, poorconnections,
or home-grown
programs. On rare
occasions, the formatter is at
fault, which is usually
indicated by a 79 Service
Error.
1 Press CANCEL JOB to
clear the print job from
the printer memory.
2 Turn the printer off and
then on.
3 Try printing a job from a
different software
program. If the job
prints, go back to the
first program and try
printing a different file. If
the message appears
only with a certain
software program or
print job, contact the
software vendor for
assistance.
4 If the message persists
with different software
programs and print jobs,
disconnect all of the
cables to the printer that
connect it to the network
or computer.
5 Turn the printer off.
6 Remove all memory
DIMMs or third-party
DIMMs from the printer.
7 Remove all EIO devices
from the printer.
8 Turn the printer on.
9 If the error no longer
exists, install each
DIMM and EIO device
one at a time, making
sure to turn the printer
off and on again as you
install each device.
10 Replace a DIMM or EIO
device if you determine
that it causes the error.
Try new network card
pdouglasss

Jun 18, 2008 | HP LaserJet 4650 Color Printer Manual...

1 Answer

Hp 9500hdn has error 8388D4 EIO devise 3 disk not funtional


Try the following steps to reinitialize the HDD:

1 Turn the printer off.
2 Turn the printer on.
3 Press and hold PAUSE/RESUME (LJ 9500) or START (LJ 9500mfp) on the control panel during the
memory count.
4 Hold PAUSE/RESUME (LJ 9500) or START (LJ 9500mfp) down until all three error lights illuminate
steadily.
5 Press (the 5 button on the MFP) until INITIALIZE DISKS appears on the display panel.
6 Press (the 6 button on the MFP).
7 The printer begins initializing the disk (this might take a moment). The control panel displays the
HP event logo and eventually displays READY.

Oct 02, 2007 | HP Color LaserJet 9500HDN Printer

Not finding what you are looking for?
HP Color LaserJet 9500HDN Printer Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...