Question about Ricoh 3310Le Fax Machine, FAX3310Le Printer

Open Question

Error Code 0544H received . I will tri the reset but when i press energy saver key it not responding please advise Samy periyasamy@bukhatir.ae

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 161 Answers

SOURCE: Error code SC 548 on Ricoh Aficio 1022 copier. Need to reset m/c

sc 548- service call - fusing unit not set properly
the fusing unit connector may be loose.
u can reset the error by entering the service mode (careful -do not change anything )
to enter the service mode press [all clear](yellow button) ,[1],[0],[7],[clear](orange button)and keep the button pressed for about 5 sec.
go in copier options , then mode 5, then option 810
and execute(or 1 & ok)

(careful -do not change anything else)

Posted on Jan 16, 2010

Ad
  • 6 Answers

SOURCE: Ricoh CL7300 always give

opne then close paper trayy

Posted on May 17, 2010

  • 5 Answers

SOURCE: Ricoh Aficio AP410N -error code SC514.

please explain ur problem

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

7 Answers

Samsung Refrigerator Error Code 1E or IE


I'm not sure what all the wild goose chase answers are all about, but you guys are WAY overthinking this and not solving the problem. I'm a 45 year old stay at home mom, decidely and possibly forever "un-handy". The solution is simple, as I just administered it this morning after a self-imposed power outage: Press the "Energy Saver" + "Lighting" button simultaneously for 3-5 seconds and you should be back in business. When this happened on a previous occasion, we had a repair guy come out, although the fridge was operating perfectly bc we weren't sure if that error message was indicating something important. Well, I felt like a schmuck when the guy showed me how to reset the panel (and we were both a bit irritated that phone tech support didn't do a better job of level 1 troubleshooting). So there it is...if your fridge is working fine but showing 1E, press Energy saver + Ligthing at the same time (you may need a flashlight since the panel will be dark).

Aug 20, 2012 | Samsung RF4287HARS French Door...

3 Answers

I am looking to reset my toshiba studio 163 spanner signal.the machien stoped functioning. i need he reset code.


Hello
Fisrt off please hold down the 8+C buttons together, there will show a error code in the copy quantity display.
Now not knowing what the error code is, i am going to hope that it is C44 that is the most common
error code on the E163 machine. If it is C44 please do the following.
Switch off the machine.
While holding down 0+8 buttons, switch on the machine.
When ad shows on the display, input 400 then press the start button.
If the value is not 0, input 0 button and press the interupt and energy saver buttons to save the change.
Switch off the machine wait awhile and then switch the machine on again.
The problem should be sorted out.
If the error code is not C44 you will have to let us know what the error code is, by holding the8+0 buttons down together.

Here is hoping the machine is working
Regards

Apr 15, 2011 | Toshiba e-Studio163 Copier

2 Answers

Is there a reset button on the dishwasher? if so, where?


Not sure what type of reset you are after. Is the dishwasher not responding to any panel switches.

Is the keypad locked, i.e., is the control lock light on? Then press Energy Saver Dry button for 4-5 secs.

Are some lights flashing and dishwasher will not start? Have you tried to turn mains power off and back on?

If you think the controller needs a reset, you could try this sequence of keys within 7-8 secs.
hi temp scrub/ energy saver dry/hi tempscrub/ energy saver dry/ hi temp scrub/ energy saver dry.

If the reset sequence has worked correctly, then all lights should light up. Press Cancel to exit from reset mode. I am assuming you have a users manual. If not then download from here.

Please rate the solution if it helps your problem otherwise post a comment

Feb 18, 2011 | KitchenAid 24 in. KUDI01IL - Multiple...

1 Answer

Dishwasher clean light blinking.. Is this a code?


Hi
If clean light is blinking 7 times then it may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting the same error. If yes, then it is a water heating fault. To resolve this error try pressing this reset sequence-- Heat Dry - Normal - Heat Dry - Normal or High Temp - Air Dry - High Temp - Air Dry or Hi Temp Scrub, energy saver dry, Hi Temp Scrub, energy saver dry. Now let the unit run for 2-3 minutes and then you press the Cancel/Drain button and allow it to completely drain and reset.
If this doesn't work then it's an issue with the wash pump not pumping the water past the heater efficiently or due to lack of water to heat. Please make sure that heater is not open circuited and is heating the water efficiently. You'll have to check the heater using a multimeter; the meter should read between 3000 to 3300 ohms (Use multimeter on Rx1 ohm setting). If heater is fine then make sure water pressure is optimum and fill valve is working fine. Hope this helps... Please post back for further assistance.

Jan 07, 2011 | KitchenAid KUDS50SVSS Builtin Dishwasher

1 Answer

How to reset access code without the access code?


Unplug the machine from the rear
Hold down the ENERGY SAVER key while plugging the machine back in
scroll down to SHIPMENT SET
press SET
2

wait for the machine to reboot

Mar 05, 2010 | Panasonic Panafax UF-790 Plain Paper Laser...

1 Answer

Haw to reset gestetner2722ztd error E1


press dot ( . ) on the left side of 0 so we could know whats the second defree number is. to reset press energy saver once then 107 press stop button until 1 blinks then 5 # 810 # turn off copier then on.

Jan 10, 2010 | Gestetner Copier

1 Answer

Error code E6 on my KDW12ST3A dishwasher


  • The solution is to reset it.The procedure is as follows.
  • Crack the Door open.
  • Within 3 Seconds enter the following sequence:- High Temp Scrub - Energy Saver Dry - High Temp Scrub - Energy Saver Dry.
  • Close and latch the door.
  • Press the cancel button ( The Circle with triangle in it ).
Thank you.

    Sep 17, 2009 | Dishwashers

    2 Answers

    Do not know how to use the energy saver feature


    i have a problem for minolta di351 by code c009 pls help me

    Feb 21, 2009 | Toshiba e-Studio 350 Copier

    1 Answer

    E6 error code displayed on Kenwood kdw243a dishwasher


    The reset sequence used is:
    1) Crack the door open.
    2) Within 3 seconds press the following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry
    3) Close and latch the door
    4) Press the cancel button (the circle with the triangle in it)

    Nov 24, 2008 | Kenwood KW85 Air Conditioner

    2 Answers

    Reset timer for energy saver mode


    Every new unit comes with the user's manuals, and every new unit has free tech support from the vendor. What you are looking for is under the "System Settings" found after pressing "Additional Functions".

    Oct 18, 2007 | Canon ImageRunner 3320N Copier

    Not finding what you are looking for?
    Office Equipment & Supplies Logo

    Related Topics:

    51 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ricoh Office Equipment & Supplies Experts

    OfficeServiceAjnc
    OfficeServiceAjnc

    Level 2 Expert

    183 Answers

    fares

    Level 1 Expert

    67 Answers

    CheckitRight
    CheckitRight

    Level 3 Expert

    1362 Answers

    Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...