Question about Lowrance Lst 3800 In Dash Digital Depth And Temp Guage

Open Question

Lowrance Lst 3800 depth flashing - Lowrance Lst 3800 In Dash Digital Depth And Temp Guage

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

gopakumarg43
  • 73619 Answers

SOURCE: i have a lowrance 520c

Hello
If you have changed several settings and wants ot return the unit to basic automatic operation:
* Press "Menu ' Menu ' (down arrow) to System Setup ' End ' (down arrow) to Reset Options ' End.
** Press ( Try these. There is no other adjustments can or should be done to this unit. OK.

Posted on Jun 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's wrong? My Lowrance Mark 5x dsi depth finder flashes or pulsates a depth of 60 ft. All the time.


Since the unit powers up, we can pretty much eliminate a power supply problem.

I would start by carefully inspecting your transducer lead for kinks, crushing etc. Assuming the cable is OK, clean and lubricate (silicone spray, safe for plastics) the cable end and where the cable connects to the unit.

Hope this is helpful to you.
-Steve

May 04, 2015 | Lowrance Boating

3 Answers

When turning on the Lowrance the depth indicator will only register 0.0 and continues flashing the number. The Lowrance is a LCX-17M. We tryed the Lowrance on another boat with a working transducer...


here is the link to your the lowrance web site. the trouble shooting guide says that if you tried to it on another boat than you might need to take it in for service. but there is a section that explains how to do a soft reset on the unit. you might try that.

http://www.lowrance.com/en/Support/Troubleshooting-Guide/Depth-Reading/

please rate and comment on your experiance with fixya.

Aug 15, 2008 | Lowrance LCX-18C

Tip

Lowrance X515C Manual Download



Download Lowrance X515C Manual

Models: X510C / X515C

80240ca.jpg

Have you misplaced your Lowrance X515C Fish Finding & Depth Sounding Sonar Owners Manual?

Would you like a digital, searchable, pdf version of the Lowrance X515C Fish Finding & Depth Sounding Sonar Users Guide?

Follow this link (& click FREE) to download a pdf version of the Lowrance X515C Fish Finding & Depth Sounding Sonar documentation.

I hope that helps.
__________________________________________

on May 06, 2010 | Boating

Tip

Lowrance X510C Manual Download


Download Lowrance X510C Manual

Models: X510C / X515C

80240ca.jpg

Have you misplaced your Lowrance X510C Fish Finding & Depth Sounding Sonar Owners Manual?

Would you like a digital, searchable, pdf version of the Lowrance X510C Fish Finding & Depth Sounding Sonar Users Guide?

Follow this link (& click FREE) to download a pdf version of the Lowrance X510C Fish Finding & Depth Sounding Sonar documentation.

I hope that helps.
__________________________________________

on May 06, 2010 | Boating

1 Answer

The LST 3800 powers up and on the display it shows backlight. every now and then it will cycle through the optional menus. When I press the menu button or the up and down buttons nothing happens.


I just purchased a 2007 VIP Vantage with an LST 3800 and it was experiencing similar problems. I noticed that the "UP" button didn't feel right when pushed, so I pulled it out of the dash and used a very small screwdriver to gently pry off the front bezel. There's a clip on each side that holds it in place, and it's fairly easy to remove. The rubber button pad had a tiny piece of plastic (it was the same material and color as the plastic in the bezel) between the bezel and the button pad that was causing the "UP" button to depress constantly. I put the button pad back into the bezel, snapped it back on and the depth sounder is working fine. Best of luck.

May 12, 2011 | Lowrance Lst 3800 In Dash Digital Depth...

1 Answer

Lowrance 3500 Digital Depth Guage flashed 0.5 continuously


If you have a glue in style transducer, be sure that the fluid has not leaked out of the cup. Otherwise, there really is no effective way to troubleshoot those without having known good parts to swap and try. If the cup is empty, it will need to be resealed with silicone (100% silicone) and then refilled with mineral oil.

Aug 26, 2009 | Boating

1 Answer

Built in transducer is not picking up/transferring depth to graph


I havew a Minn Kota trolling motor on a Z21 Ranger. Minn Kota has a built in (puck type) transducer on the motor. I have a lowrance 135x on the front. The lowrance will read the temp but will blink the depth. I switched out the depth finder with another 135x with the same results. I have a 522c gps unit networked together and mounted on the console that works fine. Any suggestions on the problem with the 135x?

Jul 27, 2009 | Minn Kota Maxxum 70 Universal Motor/Sonar...

1 Answer

X510c most of the time it reads 1.6 for the depth, it flashes 1.6 then it will go to the correct depth for a shqrt time then get stuck on 1.6 again some times other depths but mostly 1.6


Does this occur at any depths...over 20ft even.

The X510c will have problems keeping depth in shallow water...especially if it is muddy, weedy down there.

If the problem occurs even in depth over 20ft, then try resetting the unit:

1. Turn unit off
2. Press and hold ZIN, ZOUT, and PWR until you see the depth (flashing or not) in the top left corner.

If the problem still occurs, make sure the transducer is clean and still mounted so that it is sending the signal straight down to the bottom.

If the problem still occurs, make sure the power is good. You can have the voltage displayed on the screen through the overlay data menu.

Does the problem occur at any speed? If the problem clears up when you stop or slow down, the problem is due to cavitation and the transducer will need to be moved to a location where it is in a smooth flow of water at all speeds.

If none of this helps, there may be a malfunction with the X510c. You can try to update it but you will need to get the software update from someone at Lowrance support and then find a way to connect your X510c to a Lowrance unit that has a memory card slot via a NMEA 2000 network. I can help you with this if you need.

Other than that you can have the X510c returned to the factory for service.

Jul 09, 2009 | Lowrance Boating

1 Answer

I need a manual for my lorance x38 HD fish


http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man download a pdf version on this page

Apr 23, 2009 | Lowrance Lst 3800 In Dash Digital Depth...

Not finding what you are looking for?
Lowrance Lst 3800 In Dash Digital Depth And Temp Guage Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lowrance Boating Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Lowrance Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...