Question about Symphonic ST420FF 20" TV

2 Answers

I lost my remote for my tv

Without the remote i dont know how to get to program button that does that

Posted by on

  • Anonymous Feb 19, 2009

    cannot use rca jacks on front of tv to access video game system, all universal remotes wont change input source, can someone help

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Search the tv around to find button on the tv there must be for program and volume configuration

Posted on Jan 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

You need a remote to switch to the input. there is no other way. need to get a replacement or universal remote. some remoes might not work too so you need to just buy and return till find one that has a button that works to switch to the channel.

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to use a rca universal remote butdont know the code


3 Ways to Program an RCA Universal Remote - wikiHow

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowJump to Remotes Without "Code Search" Button - Using Brand Code Search ... (for example, many stereos don't support remotes). ... in this article to program the remote,but ... If you know the exact code that you need ...

Program an RCA Universal Remote Without a "Code Search"

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a "code ...Don't let go of the TV button. ... Please tell us everything you know about.

Programming the RCA RCRN04GR Universal Remote


Dec 25, 2015 | RCA Televison & Video

2 Answers

What to use a rca universal remote but i dont know the code


3 Ways to Program an RCA Universal Remote - wikiHow

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowJump to Remotes Without "Code Search" Button - Using Brand Code Search ... (for example, many stereos don't support remotes). ... in this article to program the remote,but ... If you know the exact code that you need ...

Program an RCA Universal Remote Without a "Code Search"

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a "code ...Don't let go of the TV button. ... Please tell us everything you know about.

2 Easy Ways to Program an RCA Universal Remote Us



Dec 25, 2015 | RCA Televison & Video

1 Answer

I have a jvc television and bought a universal remote. i dont know the code for the remote. do you know the code?


These are the steps on how to program your Universal Remote Control to your JVC TV even without the list of code.

1. Manually turn ON your TV.
2. Press and "HOLD" CODE SEARCH
3. Press and release the TV button you want to set up
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the TV turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the TV turns off, press and release ENTER.
7. With the TV on, press any other button. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-6.

Jun 14, 2010 | JVC RM-C18G-1H Remote Control

1 Answer

Programming the ramote to tv


i dont know how to program the remote for tv..i got the codes

Feb 28, 2009 | Philips Magnavox Learning Universal Remote

2 Answers

Need to know "HOW TO" set up RCR312W


You have to hold the component button (TV) and enter the code from http://www.rca.com/codefinder. The SKU it asks for, on my RCR312W, was under the lid from the batteries. Hope it helps.

Feb 15, 2009 | RCA Universal Remote Control

2 Answers

PX- rc1


Basically all it takes to restore the TV to factory setting is to unplug the TV from power and all connecting cables for about 3-5 hours (depending upon your model). This is called a Hard Reset and should restore the TV back to factory defaults.

Oct 23, 2008 | Televison & Video

3 Answers

Lost codes to program my remote


im trying to connect to my tv and need the codes....its a toshiba tv

Oct 13, 2008 | RCA RCR311B Remote Control

1 Answer

I have a phillips universal CL034 remote control and i dont know the code or how to program it to my television


without knowing the brand of the tv i have to give you generic instructions on how to program the remote without knowing the codes:

  1. Turn your tv on manually
  2. on the remote press TV once
  3. Press and hold the set button until the LED red light blinks twice, then release the set button
  4. enter 9-9-1. the led will blink twice
  5. aim the remote at the tv and slowly alternate between pressing POWER and TV. Stop when the TV turns off after pressing power.
  6. lock in the code by pressing and releasing the set button. the led will blink twice.

Jul 02, 2008 | Televison & Video

2 Answers

Can you help me program my remote?


http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Apr 15, 2008 | Philips Universal PH301S Remote Control

1 Answer

Teaching a Universal remote w/o the original


use the menu button on the tv. you dont need the remote.

Dec 05, 2007 | Samsung CXJ1352 13 in. TV/VCR Combo

Not finding what you are looking for?
Symphonic ST420FF 20" TV Logo

695 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2124 Answers

Are you a Symphonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...