Question about Canon PowerShot A75 Digital Camera

3 Answers

Lcd screen The lcd screen went black and the only way I can get it to come on is with the mode dial on stitch assist

Posted by on

  • Anonymous Jan 12, 2009

    I had the same problem that I just resolved. When I turned on the camera, the LCD screen was black and in stitch mode ok. Just read a previous recommendation of playing with the settings (I replaced batteries, reset date, changed the display time, and looked at all the other settings). Then when I went back to the picture taking mode viola.... the display was back. Seemed like magic because I really didn't know what I was doing with the settings. Hope it works for you too.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This seems more likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except

Posted on Dec 03, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Yes Canon will fix this problem. I have an A75 and love it, but the screen is constantly dark. Tech support at Canon said its the imaging sensor that is defective. I have just called them and they are sending the prepaid shipping label to me so I can send the camera in. Call Tech support at 800-828-4040 for help.

Deb

Posted on Jan 12, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

Actually this sounds like it might be a defective CCD imager. Take a picture while the screen is black and download it to your computer. Is the picture also black? If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Posted on Jan 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

LCD screen black when photo being taken


Hi!
Have you tried pushing the button first under the mode dial? It changes view mode, just above the MENU button?

Tom

Aug 01, 2009 | Sony Cyber-shot DSC-W50 Digital Camera

2 Answers

No display powershot a75


Did you get a solution to your problem? I am experiencing the exact same thing with my A75. Still takes pictures and displays them for the 2 second preview, then back to black. And they download fine, too. But I get the same black screen in every mode except stitch assist and movie mode. Thanks.

Jun 06, 2009 | Canon PowerShot A75 Digital Camera

1 Answer

Dvx100a showing black screens on lcd screen and view finder


You probably have the lens cap on, the iris dial closed, or you are in vcr mode rather than camera mode. You may also have the nd filter set to 1/64th, this is only for bright sunlight. When shooting indoors with low light, set the nd filter to off and hit the iris button until iris manual appears on the lcd, then dial the iris dial in front of the iris button up or down to bring the iris to around 5.6 f stop.

Feb 26, 2009 | Panasonic AG-DVX100 Mini DV Digital...

1 Answer

Lcd doesn't work


While in shooting mode, set dial to stitch and then press menu. That's the only time my screen works, and the only way I can make changes.

Dec 08, 2008 | Canon PowerShot A590 IS Digital Camera

2 Answers

A85 LCD stays off in all modes except "stitch"


Hi Toonz
I have exactly the same problem as Shimoni and Antonio with my 4 years old A85.
But sorry, its not a problem of the CCD, cause we all get a clear actual picture on the LCD but just in stitch mode! In any other shooting or playback mode the LCD is dark. So the sensor must be working well and Canon Germany doesnt repair for free. Our failure is different and we have to pay much more than the camera is worth ;-((
Dieter, Munich

Aug 28, 2008 | Canon PowerShot A85 Digital Camera

2 Answers

LCD screen is black except in stitch assist mode.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

May 13, 2008 | Canon PowerShot A75 Digital Camera

2 Answers

LCD Monitor remains black except in stitch assist mode


Can you see the menus?? Can you see pics in "reveiw" mode? If yes, and this is only a "taking picture" issue, then the LCD is good. You probably have a bad CCD. Canon USA will repair this for free. Go here for details. They will send you 2 emails. One with the UPS label and another with info sheets to be sent with the defective camera
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

May 12, 2008 | Canon PowerShot A75 Digital Camera

2 Answers

Nothing appears on the LCD screen. What should I do?


The camera may have shut off automatically to save power. Press the POWER button to turn it back on. Also make sure the mode dial is turned completely to the desired mode. When the camera is connected to a computer, the LCD screen is disabled. When it is connected to a printer, press any button to display the print progress screen. After a moment, it disappears again.

Sep 12, 2005 | Epson PhotoPC L410 Digital Camera

Not finding what you are looking for?
Canon PowerShot A75 Digital Camera Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

165 Answers

old marine
old marine

Level 3 Expert

1818 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...