Question about KitchenAid Mixer Wire Whip Whisk 5-quart K5 4162166 9704309

Open Question

KitchenAid Mixer 4c Wire Whip Whisk - KitchenAid Mixer Wire Whip Whisk 5-quart K5 4162166 9704309

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
defrankond
  • 65 Answers

SOURCE: KitchenAid Countertop Food Mixer

ok firstly if you have a stand mixer with the lift bowl you have to put a dime on the side of the bowl at the base and see how much clearence is needed to be taken away. if the dime gets moved the mixer is ok. if not take off the flat beater, take out the bowl, and look at the back of the stand. just below the motor about 2 inches you will see a screw. turn it to the left a quarter of a turn. dont over adjust do it slowly. if you have the one that you tilt the head back on do the same thing with the screw up to you get to the adjusting part. the screw will be in a different spot on those mixers. it is located in the neck of the mixer. it is right in the area that tilts back. the dime shouldnt fly around the bowl it should just gently get tapped. and never use the wisk when adjusting always use the flat attachment. and always adjust slowly never over adjust.

Posted on May 05, 2008

Ad
jgwhomeequip
  • 1902 Answers

SOURCE: I have a KitchenAid Model K4-B without attachments.

http://www.marbeck.com/mixers_kitchenaid_beaters.html
Here you can order any and all parts for this machine

Posted on Feb 08, 2009

  • 145 Answers

SOURCE: KitchenAid Parts

Given the age of a 3-C stand mixer, finding additional parts for it will be exceedingly difficult. The best recommendation is through E-Bay or antiques stores - a specialty dealer. Kitchenaid parts distributors will no longer have anything in inventory for the 3-C mixer.

Posted on Jul 08, 2009

  • 1 Answer

SOURCE: I recently acquired a KitchenAid/Hobart Model 4C

A number of attachments were available for the 4C, such as a juicer, a meat grinder, etc., all of which ran off the PTO on the front of the housing.  The only beater, however, was the wire one.  No dough hook was ever made.  I have been told that the motor didn't have the necessary power to run a dough hook.

Posted on Oct 02, 2009

  • 5 Answers

SOURCE: Brand New Kitchenaid Artisan Mixer - Mixer head is stuck

Unplug the mixer, turn the whisk the opposite of normal rotation in a quick motion, the remove a per normal.

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix a wire prong on an egg beater attachment that has broke loose?


The wire whips are repairable but only by welding the whip back into place, that can be quite costly, and with new wire whips costing less than $20 that is the more economic solution.

Here is a link to the wire whips made by KitchenAid: Wire Whip MendingShed com Bowls Beaters Attachments

You will want to get your model number from the bottom of the mixer to ensure you get the correct wire whip. If you have trouble finding your model number in the chart be sure to contact us at Repairs Parts Kitchen Store MendingShed com & we will be happy to assit you.

- Colleen @ Mending Shed


25538293-25j1o4dy5jqip5urp5sucdth-5-0.jpg

Mar 08, 2015 | KitchenAid Food Mixers

1 Answer

I own the 6 QT Stand mixer. Is there a Is there a 4 or 5 qt bowl that works with this mixer?


Kitchenaid does not make a 4 or 5 quart bowl that would fit your 6 quart mixer, but other 3rd party companies do!
You may be in luck.
I haven't seen this bowl in person, but it apparently will fit your 6qt mixer. Here is a link to a page selling the mentioned attachment. It comes in a set, with appropriate wire-whip attachments:

http://www.chefscatalog.com/product/25686-kitchenaid-3qt-stainless-bowl-and-whip-set.aspx

Jan 13, 2015 | KitchenAid Kitchen Aid KP26M1X 6 Quart...

1 Answer

Where can you purchase these items for the kitchenaid food mixer model no.ksm90ww


That is a Wire Whisk, I carry them in stock in New Zealand but I doubt that will help you. What country do you wish to purchase it in?

Jan 08, 2015 | KitchenAid Food Mixers

2 Answers

Hello im looking for a wire whip for kitchenaid k4-bg where can i get one


There is a website at the name of www.marbeck.com. They have plenty of KitchenAid products and accessories. I found the wire whip that you would need for that model at a price of $17.99. Here is the exact web address: http://www.marbeck.com/mixers_kitchenaid_beaters.html

I hope that helps out.

Dec 22, 2010 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Brand New Kitchenaid Artisan Mixer - Mixer head is stuck


Unplug the mixer, turn the whisk the opposite of normal rotation in a quick motion, the remove a per normal.

Feb 19, 2010 | KitchenAid KSM150PS Artisan Series Stand...

2 Answers

I recently acquired a KitchenAid/Hobart Model 4C stand mixer for free. It seems to work okay but I?m in need of a flat beater, dough hook and wire whip as it came with only the juicer attachment. Do you...


A number of attachments were available for the 4C, such as a juicer, a meat grinder, etc., all of which ran off the PTO on the front of the housing.  The only beater, however, was the wire one.  No dough hook was ever made.  I have been told that the motor didn't have the necessary power to run a dough hook.

Jul 25, 2009 | KitchenAid Food Mixers

1 Answer

I have a KitchenAid Model K4-B without attachments.


http://www.marbeck.com/mixers_kitchenaid_beaters.html
Here you can order any and all parts for this machine

Feb 08, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

KitchenAid Parts


Given the age of a 3-C stand mixer, finding additional parts for it will be exceedingly difficult. The best recommendation is through E-Bay or antiques stores - a specialty dealer. Kitchenaid parts distributors will no longer have anything in inventory for the 3-C mixer.

Jan 03, 2009 | KitchenAid Food Mixers

Not finding what you are looking for?
KitchenAid Mixer Wire Whip Whisk 5-quart K5 4162166 9704309 Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

87 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...