I bouught a hp photosmart printer from the yard sale on yesterday and it did not have the power cord with it but did have the cd with it but it will not come on. i had an old cord from my scanner to plug in the back of it and it fit right in but will not come on. Can you please tell me why this machine is possibley not comming on??? Hp photosmart printer Model #A616
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Follow steps below to reset Hewlett-Packard (HP) All-in-one Printers (products with keypads only). Resetting your printer will reset your printer to its original state. For products with keypads on the control panel: 1. Without turning the unit off, unplug the power cord from the back of the product. 2. Press and hold “# and 6′ keys. 3. While holding those keys plug the power cord back in. 4. Wait until the screen goes blank before you release those keys. 5. Follow on printer screen instructions. For Box-type models: 1. Unplug the power cord from the printer. 2. Wait for 30 seconds. 3. Plug the power cable back in the printer and turn it on.
This error comes due to carriage jam. Turn off the printer and unplug it from wall socket. Now, remove the cartridges and check for any dried up ink residue on cartridges on inside the carriage. Clean the cartridges contacts and carriage using a Q-tip dipped i alcohol. Let the carriage and cartridges dry before you plug in the printer.
Install the cartridges and check. If it still shows error then unplug the power cord coming to the printer without switching it off. Now, remove the rear door of the printer and check for any paper jams over there, remove if any. Wit for at least 15 seconds and plug in the power cord. Now check whether it is working.
Try this: first shut it off, second disconnect USB cable third unplug power cord from back of printer, fourth unplug power cord from wall (or power strip), wait 15 minutes. Then reconnect everything in reverse order and see if that solves it.
HP PSC 2410 PhotoSmart All-in-One Q3087A, Q3088A, Q3089A
HP PSC 2500 Series PhotoSmart All-in-One Q3094AR, Q3094A, Q3095A
HP PhotoSmart 7900 Series Printer Q3020AR, Q3020A, Q3021A, Q3022A, Q3023A, Q3024A Q3090A
For HP 0957-2094 PhotoSmart 2410, 2510, 5510 Printers and much more.Come with power cord. Power Rating: 32V 940mA and 16V 625mA Note: Amps and Watts are maximum load tolerance. Devices only draw as many Amperes or Watts as they needed
For purchasing you might also contact this link below: http://cgi.ebay.com/Adapter-For-HP-0957-2094-0950-4466-32V-940mA-16V-625mA_W0QQitemZ250414311173QQcmdZViewItemQQimsxZ20090427?IMSfp=TL090427149005r21586