Question about Air Tools & Compressors
Serial number DHU 210284 atlas copco electrical wiring diagram
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you should have an oil trap or two in the line from the out let of the compresor before it go's into the factory
they also trap any water in the air there easy to fit into the line and not very pricy
Posted on Feb 11, 2010
suspect that the inlet control valve or control regulator may be at fault, but are you sure that your demand is not more than the compressor can deliver? if you close off the service valve will it come up to pressure and idle back as normal? if so then you may have a leak in your system or your demand is to large. But having a knowledgeable service tech check it out would be the next step.
Posted on Feb 16, 2010
Firstly check the rotation of the Motor,
You may be having two problems.
1) With in 15 minutes it should load, check the Loading Solenoid valve, and Unloading valve.
2) It should not heat up Your Cooler must be clogged check it is heated up if not check the Thermostatic Valve which is not giving oil to cooler or you need to check the Oil Stop valve.
Posted on Jul 22, 2010
Tips for a great answer:
Nov 15, 2014 | Air Tools & Compressors
Oct 29, 2014 | Air Tools & Compressors
Aug 06, 2014 | Atlas Copco GA Rotary Air Compressor...
Jan 28, 2014 | Atlas Translator Atlas Copco Air Hammer...
Oct 21, 2012 | Atlas Translator Atlas Copco Air Hammer...
May 28, 2011 | Air Tools & Compressors
Oct 14, 2010 | Air Tools & Compressors
Sep 20, 2010 | Air Tools & Compressors
Feb 25, 2010 | Atlas Translator Atlas Copco Air Hammer...
409 people viewed this question
Usually answered in minutes!