Question about GE 15107 24Hour Yard Stake Timer
Lost the instructions from last year.
1-9= # of hours it stays on after dusk
D= on from dusk to dawn
R= random hours is stays on after dusk each night
Posted on Dec 06, 2012
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
1) Following links will help identify timer, and download possible manual:
2) Mode button could be a problem: After programming is complete, press clock button to start timer programs at next set point.
It is not necessary to push Mode button.
3) If timer does not show, then Add comment and include photo or detailed description of timer for possible identification of timer, and possible manual
Posted on Dec 05, 2012
Tips for a great answer:
Dec 07, 2014 | GE Hardware & Accessories
Jul 15, 2014 | Woods Hardware & Accessories
Dec 04, 2012 | GE Hardware & Accessories
Dec 02, 2012 | GE Home
Nov 24, 2012 | Hardware & Accessories
Nov 14, 2012 | Hardware & Accessories
When the timer is
plugged in, the timer's dial will turn clockwise. The pointer, on the face of
the dial, points to the current time of day.
1. Locate the segments
on the outer edges of the timer's dial. These segments, each representing 30
minutes, can be pushed down (try using the tip of a pen or pencil). Conversely,
segments pushed down can be easily pushed back by hand. Be sure all segments
are pushed up before programming. Select a time period (or periods) you want
the device turned on, push down the segments that fall on or within that time
period. For example, to have the timer turn a device on 10PM and off at 2AM, push
down the segments representing 10PM and 2AM, and ALL the segments in between. See
Figure 1.You may need to turn the dial clockwise to access the desired
2. Rotate the timer's
dial clockwise until the pointer on the face of the dial points to the current
time of the day. Note: Nighttime hours (from 6:30PM to 6:30AM) are highlighted.
3. Plug the timer into
an electrical outlet convenient to the device to be controlled.
4. Plug the device into
an outlet on the timer. Turn the device's switch to the on position for
automatic control. The timer will not turn the device on if the device's switch
is in the off position. The device will now turn on and off at the times you
have set. In case of power failure, reset the time of the day as explained in
Sorry no Image.
Dec 04, 2011 | Televison & Video
Dec 04, 2011 | GE Home
Sep 16, 2011 | General Electric Hardware & Accessories
2,003 people viewed this question
Usually answered in minutes!