Question about Fujitsu Stylistic 3500 Tablet PC

1 Answer

Fujitsu Stylistic 3500 Pen calibration in XP Tablet Edition

I have a Fujitsu Stylistic 3500 which I successfully loaded XP Tablet Edition on. I installed the Pen drivers and it recognizes the pen, but it is not calibrated. The cursor is in the correct position in the middle of the screen, but as you move up the screen the cursor goes further away from the actual pen position. How do I fix/calibrate this?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 6 Answers

Well there is a few ways to try to fix it first with a usb mouse check that the resolution is at it's native pixel count. This can be found on the manufacture website. If it is already at that resolution ensure that the CIC XPen drivers are installed. Those should have placed a recalibration program in the control panel. If those both fail, try uninstalling the drivers and restarting, then reloading the drivers. Hope this helps! food luck and godspeed!

Posted on May 16, 2009

3 Suggested Answers

pagebor
  • 2785 Answers

SOURCE: FUJITSU 3500 stylistic

plz intall service pack 2 (download it from soft32.com)

Posted on May 26, 2008

  • 2 Answers

SOURCE: pen not detected on especific zones of display

Had the same problem. Just open the tablets screen enclosure. Look at the back of the LCD panel. You will see a little circuit board with several black plastic connectors. Push all these connectors firmly to the PCD. You will notice that one or more have come a bit loose. Before closing the lcd panel housing, put some adhesive tape over the connectors. This will prevent them from failing again.

Posted on Sep 06, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fujitsu Siemens Stylistic ST4120 Tablet PC pen not working with screen


I just fixed this problem on the 4120 for a friend, What I did was first to install the drivers from the Fujitsu site so XP was displaying all drivers as installed in Device manager.


Then I ran windows update to patch it up to date and then I downloaded the drivers from the wacom site.



http://www.wacom.com/en/support/drivers

Then choose tablet pc from the first drop down and then os (xp in my case) from the second drop down.
Reboot
Pen working!

Sep 01, 2012 | Fujitsu Siemens Stylistic ST4120 Tablet PC

1 Answer

How do i get the pen an tablet to calibrate


Assuming you are running Windows XP Tablet Edition:
Go to Control Panel Select Tablet and Pen Settings Tap the Calibrate Button
Follow the instructions.
There should be a similar Tablet control in the Control Panel for other versions of Windows.

Apr 19, 2011 | Gateway M275 Tablet PC

1 Answer

Hi! Sorry for my english. I have a problem - I reinstalled my Tablet to Windows XP proffesional, and I can't find pen drivers. What I should do? Pen isn't working.


Hi iiyuu, to "Update the Driver / Software."
Go to this "Website Link." below.
"I already found the "Drivers," so you don't have to 'worry' about filling in any information!"
Fill-in all information required.
Ie: Brand Name, Model #, and Operating System...

"OS" are: XP, Vista, and Windows 7

Select the [Drivers] you need from the "List."

"Download the Drivers."

!"Take a moment to rate the help."

Thanks paul7of9

Click here: http://support.fujitsupc.com/CS/Portal/driverdownload.do

Mar 21, 2011 | Fujitsu Stylistic ST5020D Tablet PC

1 Answer

If i buy a fujitsu 3500 tablet computer with no operating system. what operating system does it need to operate correctly?


Hi,

You might try Windows NT and windows 2K as well as windows 98 because the drivers were available over the support site http://support.fujitsupc.com/CS/Portal/supportsearch.do?srch=DOWNLOADS or better try to purchase a recovery cd from fujitsu .

ERNZ

Jan 31, 2010 | Fujitsu Stylistic 3500 Tablet PC

1 Answer

Does any1 know of a compatable hdd for fijitsu stylistic 3500.


Hi Andrea53,

You might try the link http://tinyurl.com/ylxfu3b for the support site or a HDD, 20GB, FUJITSU with part # CP004863-XX or HDD,2.5 INCH,20G,TOSHIBA CP004552-01 then call the sales department of fujitsu.

ernz

Jan 07, 2010 | Fujitsu Stylistic 3500 Tablet PC

1 Answer

Fujitsu LT C-500 pen not working


Hello Zerozero, I hope to be of some assistance to you... I myself have the same tablet and just recently successfully upgraded to XP. Apparently due to licensing issues the pen driver isn't allowed to run on XP. To make it work there's two ways, the hard way involving a software download and much pain, the other way is 'relitivly' easy... lets try that way first. Download the CIC XPen off of the Fujitsu support site... now here comes the interesting part. Unpack the driver to C:\Drivers\Pen once you've unpacked it find the file called fujpen.inf open it in notepad to edit it. You will see:
[ControlFlags] ExcludeFromSelect=*FUJ02B6
Make sure the last digit is 6 in that string... this is saying to exclude that model in the driver. If it's anything other than a 6 change it to a 6. Now then... further down you'll see:
[FPC.Mfg] %FPC.DeviceDesc0% = pendrv, *FUJ02B6
Now... remember what I said about the 6 above? Yeah... the driver is fighting with itself, help it out and change the last number to a 7. Save the .inf file. Go to your device manager right click on the unknown device and update it with the modified file... and presto changeo your touchscreen works!! Now... you'll notice that when you restart it will still say that the pen cannot be started... but this should only limit the CIC software from starting... meaning that to actually write on your tablet you'll need to install microsoft office... it has built in writing pad software, and dictation software (which is my personal favorite). Good luck and God speed! If you have any problems let me know!

Oct 24, 2008 | Fujitsu Stylistic LT C-500 Tablet PC

3 Answers

The Pen


I'm not familiar with your laptop but judging from all the pdas I've had with touch screens the pen itself is only a pen, you could basicly use a wooden stick to poke at the screen and it shouldn't make a difference to the computer.

this laptop has a touchscreen If I'm not mistaken and you should be able to use it even with your fingers.

You might have a faulty touchscreen or then you need to install a driver for the screen?

Jul 04, 2008 | Averatec 3500T60 Tablet PC

1 Answer

Tablet buttons and key board


Hello,

You should downgrade (at your own risk) to Windows Tablect PC Edition, not just any Windows XP.

Hope ti helps

May 21, 2008 | Fujitsu Stylistic ST5112 Tablet PC

2 Answers

FUJITSU 3500 stylistic


plz intall service pack 2 (download it from soft32.com)

May 12, 2008 | Tablets & eReaders

2 Answers

Pen Problem


First try updating to SP2 and then get the latest Windows Updates from Microsoft.com.

If that doesn't fix it, here are some Win2000 drivers for your laptop.

http://www.fujitsupc.com/www/content/exe/PenW2k1.4.exe
http://www.fujitsupc.com/downloads/mobile/st3400_pen_w2k.exe

If that doesn't fix it, try these Wacom drivers.

ftp://198.145.255.42/drivers/IBMPC/consumer/503/PenTablet_503-3.exe

Oct 17, 2007 | Fujitsu Stylistic LT C-500 Tablet PC

Not finding what you are looking for?
Fujitsu Stylistic 3500 Tablet PC Logo

1,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Tablets & eReaders Experts

k24674

Level 3 Expert

7993 Answers

rob j

Level 2 Expert

99 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Fujitsu Tablet and eReader Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...