Question about Brother DCP-8065DN Laser Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Brother HL-5270DN PF Kit Problem
I found the answer in another group, from Sunshine3240:
Open the front cover and leave open while completing the following steps:
Turn the printer off.
Hold the 'go' button while turning the printer on. All panel lights should be on.
Release the 'go' button.
Press the 'go' button 2 times.
Press the 'go' button 5 times.
The toner light should be off.
The paper light should be on.
Close cover. The ready light should be the only light on.
Posted on Mar 13, 2009
Same with me on my MFC 8870DW. The procedure worked perfectly:
1) Turn off printer
2) Press and hold menu button and turn on. Keep holding button until you see maintenance on display.
3) Press 88. This brings up parts replacement menu.
4) Press Up arrow until you see the part you replaced (laser, fuser, pf kit1, pf kit mp).
5) Press the OK button.
6) Power off and restart printer.
But how do I know whether or not I really NEED to replace a PF Kit1? I guess I'll find out if it recurs soon.
Posted on Feb 08, 2010
1.Pull out the paper tray
2.turn the machine upside down
3.push the blue lift arm and pull out the pin of the PF roller
4.then slide the PF roller to the left and pull it out
5.replace it with new one put the pin of the new roller into the hole of the blue lift arm.
6. place the machine on its base.
P.S you need reset pf roller counter after replacement
press "MENU - START - 088"
LCD shows "PARTS REPLACEMENT"
go down with arrow till "reset PF kit T1?" PRESS "SET" key
Posted on Jun 21, 2010
SOURCE: Brother DCP 8060 is displaying
After approx. 25000 pages you should replace drum unit
This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.
This message would continue to appear if the drum counter was not reset when you replaced the drum.
To reset the drum counter, follow the instructions below:
Posted on Oct 04, 2010
Tips for a great answer:
May 07, 2014 | Brother DCP-8060 All-In-One Laser Printer
Apr 12, 2013 | Brother HL 5250DN Laser Printer
It is time to replace the paper
feeding kit for Tray 1.
Call Brother Customer Service to replace the
PF Kit 1.
You can read more by clicking here or copy and paste link to your browser address bar:
then go to page 110 (you can type 110 at the top of the page to quickly get to the page)
I hope this helps. Sorry for the small font
Mar 10, 2011 | Brother Office Equipment & Supplies
Oct 04, 2010 | Brother DCP-8060 All-In-One Laser Printer
Aug 04, 2010 | Brother MFC-8460N Laser Printer
May 12, 2010 | Brother DCP-8060 Laser Printer
Jan 31, 2010 | Brother DCP-8065DN Laser Printer
Nov 18, 2009 | Brother DCP-8060 All-In-One Laser Printer
Nov 13, 2009 | Brother DCP-8060 All-In-One Laser Printer
Jan 05, 2009 | Brother Multi-Function Center® DCP-8060...
183 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: