Question about NorStar M7310 Corded Phone

1 Answer

Program exisiting extension number into new meridian phone

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • NorStar Expert
  • 277 Answers

In configuration programing (tech programming) "Change DN" needs to be modified.
If you do not know the config password or how to program then call your local vendor or make do with DN it was assigned when you plugged it in.

Posted on Dec 07, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: trying to add new phones to system

If you plug the phone in and it comes up with a display, then it has an extension.

To find the extension number of the phone, press Feature * 0, the display will say "Inspect" Now just press one of the intercom buttons. It will display the extension number. When done hit end.

Posted on Jan 03, 2009

  • 60 Answers

SOURCE: Meridian Norstar M7310 -- Phone's buttons seem disabled.

unplugging and replugging is the first step. Is your shift button stuck?

Dan

Posted on Aug 01, 2009

  • 6 Answers

SOURCE: Moving extention number

you must change the number by programing the PBX or phisicaly change the jack in the PBX.Both solutions must be done by authorized personal.check who is serviceing your pbx and make a request.

Posted on Sep 16, 2009

consultel1
  • 860 Answers

SOURCE: Program a new Nortel m7310 phone with an existing extension

If the extension was a swap of the old M7310 with a new(ish) M7310 no additional programming should be necessary. However if the phone was replaced with another type of nortel set(M7208, M7324,T7313 etc.) then the phone will default to its base features. To re-program the feature keys press feature *3, the button you wish to program, and the feature code for that button

Posted on Sep 28, 2009

  • 1 Answer

SOURCE: extension number of phone needs to match voicemail extension #

Yes, if anyone has the solution, it would be great, otherwise have to call the service provider and pay for what is likely a very simple fix.

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our company has purchased a Nortel Norstar Meridian M7310 phone system, that has been previously used. We didn't know, but it did not come with voicemail, so it is tough to get calls when I am not here....


Programming2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key til it says appear and ring
press next key (lower right arrow)
The display should say line 002: appear only
press the Chng key till it says appear & ring
Continue til all of your active lines say appear and ring
press the heading key(top left arrow) till the display asks for another extension number
repeat line programming for that extension
press the release key when finished

Aug 30, 2010 | NorStar Meridian M7310 Phone

1 Answer

How do i program my nt8b20af-03 with an extension number?


If you plug the telephone into an activated (connected to the Norstar System) telephone jack, the lights should begin to blink while the phone boots-up. The system automatically assigns an extension number. To see what the ext. # assigned to the phone is, press "Feature * 0" (Button Inquiry) and press an intercom button. This will display the ext, # and Set Name of the phone.
Good Luck!

Aug 18, 2010 | NorStar Meridian M7310 Phone

1 Answer

How do I find out what my extension number is on my meridian phone


Press feature *0(button inquiry) then your intercom button(last or second to last on the right row of 5 buttons). It will display your intercom number and name if programmed.

Aug 14, 2010 | NorStar Meridian M7310 Phone

2 Answers

Hi there ... We have 4 lines in the office but on one of our M2000 series Meridian phones only the first 2 line buttons receive a dial tone ... How do add lines 3 and 4 to the next 2 buttons?


Programming is done on M7310, M7324 and T7316 sets.
To set up line appearence you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program the new lines on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear & ring
press the next key (bottom right arrow) till it says 003:unaaign.
press the chng key till the screen says appear&ring
Press the next key(bottom right arrow)
The display should say line 004: unassign
press the chng key til the screen says appear&ring
press the Rls key when finished

Jul 03, 2010 | NorStar Meridian M7310 Phone

1 Answer

I am unable to use the speakerphone feature on my M7208 Meridian Phone. How can I program this?


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the release key when finished

Oct 08, 2009 | Meridian M7100 Corded Phone

1 Answer

Change extension to another line pool


Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the pool on.
Press the show key (top right arrow)
The display should say Line Access
Press the show key (top right arrow)
The display should say Line Assignment
Press the next key (bottom right arrow) .
The display should say Line Pool Access.
Press the show key (top right arrow)
Press the next key till you get to the desired pool(bottom right arrow) .
Press the Chng soft key from N to Y
Press the heading key till the display says Line Pool Access(top left arrow).
Press the next key (bottom right arrow) .
The display should say Prime Line
Press the show key (top right arrow)
Press the Chng soft key till you get to the desired pool
Press the release key when finished

Oct 01, 2009 | NorStar Meridian M7310 Phone

1 Answer

Moving extention number


you must change the number by programing the PBX or phisicaly change the jack in the PBX.Both solutions must be done by authorized personal.check who is serviceing your pbx and make a request.

Sep 15, 2009 | NorStar T7316E Corded Phone

1 Answer

I have a Norstar Meridian with M7310 phones. When calling out using the speakerphone, the microphone doesn't work. When trying to switch to hands-free during a call, it puts the line on hold.


sounds like your telephones not programmed for handsfree.
Programming2.gif is done on 7310, 7324 and 7316 type sets.Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change to handsfree.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the show key (top right arrow) .
The display say foward no answer.
press the next key 3 times (bottom right arrow)..
The display should say handsfree. Press the show key.(top right arrow) change from none to auto
Press the release key when finished

Sep 14, 2009 | NorStar Meridian M7310 Phone

1 Answer

MWI doesn't work on Polycom SE-225


The issue isn't exactly resolved. This appears to be due to an incompatibility of the Polycom Se-225 on our Meridian 1 phone system. But Converse handsets with MWI work fine. I have a partial solution by disabling the lamp (LPD on class-of-service), while leaving MWA setting. This allows the interrupted dial-tone when the user lifts the handset.

Dec 09, 2008 | Polycom SoundPoint Pro SE-225 Corded Phone

1 Answer

Trying to add new phones to system


If you plug the phone in and it comes up with a display, then it has an extension.

To find the extension number of the phone, press Feature * 0, the display will say "Inspect" Now just press one of the intercom buttons. It will display the extension number. When done hit end.

Oct 27, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar M7310 Corded Phone Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...