Question about Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV

1 Answer

Tv guide doesn't work anymore

Tv guide worked until 3 days ago. I looked on line www.tvgos.com/support found a reset code but now the sreen is stuck sytating in progress for 2 days.

Posted by Anonymous on

  • 3 more comments 
  • Jerry U Dec 04, 2012

    I have a Sony model KDL-32BXR6 that the TV Guide first showed no listings this past weekend. Last night when I entered the Guide the screen displaying the Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal if this occurred with two different sets.

  • Jerry U Dec 04, 2012

    I have a Sony model KDL-32BXR6 that the TV Guide first showed no listings this past weekend. Last night when I entered the Guide the screen displaying the Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal if this occurred with two different sets.

  • Jerry U Dec 04, 2012

    I have a Sony model KDL-32BXR6 that the TV Guide first showed no listings this past weekend. Last night when I entered the Guide the screen displaying the Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal if this occurred with two different sets.

  • Jerry U Dec 04, 2012

    Sorry for multiple comments.

  • Jerry U Dec 04, 2012

    I did run the Initial Setup on Sunday and I receive channels over the air from Green Bay, Wisconsin.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Sony model KDL-32BXR6 that the TV Guide first showed no listings this past weekend. Last night when I entered the Guide the screen displaying the Setup/Display Setup Progress came up stating "In Progress". Same thing this morning. Something must have changes with the input signal if this occurred with two different sets.

Posted on Dec 04, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

PaulTulsa
  • 14 Answers

SOURCE: Sony Bravia XBR 40" LCD

First, HORIZONTAL CENTER.
1) Press MENU.
2) Scroll to SETTINGS.
3) Scroll to SCREEN.
4) Go to HORIZONTAL CENTER. Move the picture to the right. Hopefully, the line will go away. Otherwise, there is a problem with the pixels or the signal processor. Call 1-800-222-SONY. Or, http://eservice.sony.com. Have a high-limit credit card handy for out of warranty repairs. Sorry about that.

Posted on Feb 17, 2008

  • 84 Answers

SOURCE: Sony Grand wega KDF-E50A10

unfortunately the B Box assembly needs to be changed in these and price of the part alone is more than half the cost of a new tv

Posted on Apr 19, 2008

freelance-au
  • 131 Answers

SOURCE: Why dose my tv guide not work anymore?

This will probably be down to some software issue, try getting into the service menu and reset to factory, google for service menu

Posted on Mar 05, 2010

tvhelp-Dave
  • 178 Answers

SOURCE: I have a sony TV and was getting TV Guide and last

Right now the TVs need software update just like the car needs oil change. So you shall do “oil change” first. Click on http://esupport.sony.com/US/perl/swu-list.pl?mdl=KDL42V4100&LOC=3#div_pos_30 for Sony software. For further information, please add you commend.

Posted on Jun 21, 2010

  • 293 Answers

SOURCE: I have a Sony KDL-46W3000 since January

There isa problem in CRT Board.Loose connection problem in vertical section.Need for resolder the board.

Posted on Oct 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My remote was working fine until i moved. I have Direct Tv and the remote from Direct Tv works on guide. I bought a new remote from Magnavox but it doesn't work my tv. what should I try? '


You have to program the remote control to synchronize with TV. If you wish to get moredetails; codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Mar 17, 2013 | Televison & Video

2 Answers

Mitsubishi WD-60735 Control issues


This set has aside from the recessed front reset two more done with the Mitsubishi remote.

The soft reset "should" be with set on Menu, 1,2,3, enter

The hard reset requires a 4 digit number code and is based on model number and also done with the Mitsubishi remote--try to see if soft reset works at all on this model.

Mar 31, 2012 | Mitsubishi WD-60735 Projection Television

4 Answers

Ah59-02342a doesn't control tv anymore


Hi I had exactly the same problem with mine it worked the DVD player fine but not the TV even though previously it had worked both .......... Manual Guide In the manual guide I managed to dig out it says to do the following to set up the remote to work the TV

Press the TV button on the remote
Then whilst holding down the power button you need to enter in the samsung TV codes until your TV turns off (I only got to the first and it did it)
The numbers are 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98

Hope this helps

Feb 24, 2012 | Samsung TV Remote Control

2 Answers

Multi colored vertical lines near the ends of the screen and a few about the center, tv is almost three years old 2008


Does it look like one of these picture?
http://s807.photobucket.com/albums/yy352/budm/LCD%20panel/
Does the on screen menu look OK?
Bad power supply, bad T-CON, bad LCD panel can be the problem depends on what exactly is showing on the screen.
Learn about T-CON/LCD panel failure mode here:
http://www.mediafire.com/?zzjygannjty

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: www.interliquidparts.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Aug 26, 2011 | Sony Bravia V-Series KDL-52V4100 LCD TV

2 Answers

Need a code for an Atlas PVR universal remote control on a 32 in. Aveis flat sreen tv or to know who makes Aveis tv. Thank you!


Aveis is a daytek product which is a Daewoo company. I found a site where you can check and make sure of this http://www.daytek.ca/ Click on products. I found codes for daewoo on page 35 of a manual I downloaded from this site:http: //tv.manualsonline.com/manuals/mfg/shaw/atlas_pvr_universal_remote_control.html . I hope this works for you.

Oct 06, 2010 | RCA Universal Remote Control

1 Answer

The TV can't be operated by the remote anymore. I changed the batteries with new ones, unplugged the tv for a night and did a factory reset but nothing helped. It's not the remote because my universal...


The remote IR receiver may have gone out, or the logic board is not processing the IR signal from the IR receiver board. You can check and see if the IR receiver board is getting 5vdc feeding it.
See the parts for your TV here: www.shopjimmy.com

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com

Jun 25, 2010 | Vizio L32 32 in. LCD HDTV

2 Answers

TVGOS (TV Guide on Screen) stopped working on Time Warner.


split your input cable line and connect one end to your digital input and the other to your
analog or air input.

Jun 28, 2009 | Panasonic DMR-EH55 DVD Recorder/HDD...

3 Answers

No TV Guide On Screen and no clock adjustment


I have two Panasonic DMR-EH50s and one DMR-E85H. I also have a Sony DHG-HDD250 which also uses TVGOS, but it is a HD recorder (that means full DIGITAL capabilities, including the TVGOS ) My TVGOS went out in the middle of April. I messed around on the support sites for about two weeks and found little real info.

The bottom line: I live in Madison, WI & have Charter Cable. None of my DVRs were receiving the TVGOS. Charter was not processing and/or transmitting the TVGOS properly (doesn't really matter the DVRs couldn't receive them), so I called them up, got to their "Level 3 Technical Support" and explained to them that I could not receive the TVGOS digitally or analog (converted digital) on any of my DVRs. They called me back a week later and told me to try it again....

So, all you need to do (if your local Cable Company is sending it properly):

WARNING - All SCHEDULED programs that you have previously scheduled by using the TVGOS will be deleted (NOTE: not the programs that are already recorded on your hard drive, they will NOT be deleted)

Turn the unit off.

Press the up channel & down channel (on the box, not on your remote control) at the same time & hold them for at least 10 seconds. This will reset the entire TVGOS system back to the default settings that were present when you first plugged in your DVR. This erases all previous info that your DVR had about what station it used to get the signal from and forces it to scan all the channels looking for the new channel. This is the only way to force this to occur.

When you turn on the unit, it will run you through the setup like it did when you plugged it in for the first time. Enter your zip code, etc. and when you are done, turn it off & leave it off overnight.

If your TVGOS has the Station Grid but no listings, be patient, TVGO updates its own firmware on your DVR automatically, and that may be all that happens the first night. It should start updating the listings the following night.

If it found the station grid, this is a great sign!!!! This means that your cable company is working on it!!!! It took my local Cable Company about 7 or 8 days to get it working properly, but now my 3 Panasonics and my HD Sony are all receiving full listings!!!!

If you are still getting nothing, complain to your LOCAL Cable Company. It is up to them to ensure that the signal is converted to analog & sent out over cable.

Jun 06, 2009 | Panasonic DMR-E85H DVD Recorder

5 Answers

Panasonic DVR, loss of TV Guide on-screen program listings


In our case, Time Warner has dropped the channel TV Guide, it used to be channel 99, but it's not even offered any longer, so it would appear that unless this TV guide info/source is fed to the DMR - DVD by some other method, rather than having to have that specific tv channel, I think we are S. O. L.

Mar 25, 2009 | Panasonic DMR-EH55 DVD Recorder/HDD...

8 Answers

Panasonic DVD Recorder recently not updating on screen TV Guide system


I have two Panasonic DMR-EH50s and one DMR-E85H. I also have a Sony DHG-HDD250 which also uses TVGOS, but it is a HD recorder (that means full DIGITAL capabilities, including the TVGOS ) My TVGOS went out in the middle of April. I messed around on the support sites for about two weeks and found little real info.

The bottom line: I live in Madison, WI & have Charter Cable. None of my DVRs were receiving the TVGOS. Charter was not processing and/or transmitting the TVGOS properly (doesn't really matter the DVRs couldn't receive them), so I called them up, got to their "Level 3 Technical Support" and explained to them that I could not receive the TVGOS digitally or analog (converted digital) on any of my DVRs. They called me back a week later and told me to try it again....

So, all you need to do (if your local Cable Company is sending it properly):

WARNING - All SCHEDULED programs that you have previously scheduled by using the TVGOS will be deleted (NOTE: not the programs that are already recorded on your hard drive, they will NOT be deleted)

Turn the unit off.

Press the up channel & down channel (on the box, not on your remote control) at the same time & hold them for at least 10 seconds. This will reset the entire TVGOS system back to the default settings that were present when you first plugged in your DVR. This erases all previous info that your DVR had about what station it used to get the signal from and forces it to scan all the channels looking for the new channel. This is the only way to force this to occur.

When you turn on the unit, it will run you through the setup like it did when you plugged it in for the first time. Enter your zip code, etc. and when you are done, turn it off & leave it off overnight.

If your TVGOS has the Station Grid but no listings, be patient, TVGO updates its own firmware on your DVR automatically, and that may be all that happens the first night. It should start updating the listings the following night.

If it found the station grid, this is a great sign!!!! This means that your cable company is working on it!!!! It took my local Cable Company about 7 or 8 days to get it working properly, but now my 3 Panasonics and my HD Sony are all receiving full listings!!!!

If you are still getting nothing, complain to your LOCAL Cable Company. It is up to them to ensure that the signal is converted to analog & sent out over cable.

Feb 20, 2008 | Televison & Video

Not finding what you are looking for?
Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...