Question about MSI K8MM-V Motherboard
Hi carlmtclem, your not alone when it comes to hooking up the right led connector to the MSI MB. Firstly, you need to know what wire color is positive & which is negative. Most commonly the color white is ground/negative. Wire colors do vary from case to case. So look at your case led wires. Which ever color is common for each 2-pin connector, is negative. (Except the speaker wire).
All other colors are positive.
(The speaker wire color for negative is usually black & red is positive).
Your MSI board has two separate sets of pins.
JFP2 is used for the speaker only. Do not connect the power led there.
Pin one for JFP1 is shown in the manual. Pin 1 is positive & pin 3 is negitive for the HDD-LED, ECT.
Need more information?
Good luck carlmtclem!
Thank you for using fixya.
Posted on Jan 11, 2009
Posted on Feb 23, 2016
Tips for a great answer:
May 27, 2015 | MSI Motherboards
Jul 16, 2013 | Motherboards
Aug 08, 2011 | MSI P45 Neo3-FR (MS-7514-010) Motherboard
Sep 19, 2009 | MSI K8MM-V Motherboard
Jun 30, 2009 | MSI K8MM-V Motherboard
Nov 24, 2008 | Gateway MS-6389 Ver.1 S462 Motherboard...
Aug 04, 2008 | MSI K8MM-V Motherboard
Feb 07, 2008 | MSI MS-6378 Motherboard
784 people viewed this question
Usually answered in minutes!