Question about Drills
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi joel i can get you a users manual for your drill press do you have a fax machine ? or i could mail it to you let me know.
Posted on Mar 18, 2011
I have what I believe is the same press and have not been able to find anything at all on the manufacturer. However, you will find that it is nearly identical to every other chinese manufacture press in it's class. This manual should be pretty close to yours minus the oscillating features.
Posted on Oct 05, 2011
I would chuck a good size steel pin, unlock and swivel your table over to the side, clean both the taper and the socket with brake cleaner spray or electrical contact cleaner (or even Fondu Alcohol Fuel will work) to leave no oil film at all on the parts. Also run a stone around on all the male part taper surface to check for invisible burr spots and dents left when it was tossed around during manufacturing. Dry every bit of cleaner out by waiting or blowing with a hair dryer. Then tap it in with a piece of wood against the steel pin bottom. Professional shops can make the taper match so it will transmit 5 HP or more without spinning or falling out, but many workers today just don't get the quality training or buy the measuring tools to be able to do that. My Chineese machine didn't even have the draw bar threaded with the matching thread to lock in the chuck in for it's milling head, so you know they are not a detail oriented outfit. Great Guns and all facing the one way!
Posted on Dec 17, 2011
Tips for a great answer:
Jul 08, 2017 | Power Motorcycles
Mar 29, 2017 | Drills
Aug 09, 2015 | Drills
Oct 22, 2014 | Drills
Apr 10, 2014 | Drills
May 12, 2011 | Garden
Mar 17, 2011 | Dayton Audio Dayton 4CY85 Bench Drill...
Apr 17, 2010 | Drills
Sep 18, 2017 | Dewalt Drills
163 people viewed this question
Usually answered in minutes!