Question about Sector 450 No Limits Watch

Open Question

SECTOR 450 CHRONOGRAPH WATCH manual - Sector 450 No Limits Watch

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: SECTOR 450 TIME ABJUST

when looking at the face of the watch, the "dial" to the bottom-right is actually a screw-in, screw-out dial, it is not a push dial. Unscrew it until it is freed from the screw AND THEN pull it out two clicks, adjust time as needed...

Posted on Oct 22, 2008

Ad
Vicko5000
  • 1 Answer

SOURCE: Sector 250 Chronograph Alarm

the middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
pull the middle dial out to put it in alarm mode.
To set alarm:
-pull the center knob out.
-with it out you can now use the bottom (right) knob to set the alarm.
-pull the bottom right knob out one notch
-turn the knob clockwise or counter clockwise to set the alarm time
-push the knob back in (all the way)

the alarm is now set

if the center (right) knob is pulled out the alarm is ON
if the center (right) knob is pushed in the alarm is OFF
--------------------------------------------------------
I have owned this watch for about 10 years now and love it.
the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.

repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!

enjoy the watch!

Posted on Jan 09, 2009

  • 2501 Answers

SOURCE: I bought a Sector 700 Yacht timer watch in

Got ot heir web site http://www.sectornolimits.eu/#/sector/eng/contact/user-manual and choose the instructions for your watch.

Posted on Jul 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual for my sector


As there is no manual downloads possible for SECTOR watches, the only solution is to contact SECTOR directly. Of course you can browse all the internet, but I'm quite sure direct contact will save you nerves, time and money.
Here is the link:

http://www.watchservicecenter.it/

Apr 22, 2014 | Sector 210 Expander Black Dial Chronograph...

1 Answer

I need a manual for my sector 210 3253926025A


As there is no manual downloads possible for SECTOR watches, the only solution is to contact SECTOR directly. Of course you can browse all the internet, but I'm quite sure direct contact will save you nerves, time and money.
Here is the link:..

http://www.watchservicecenter.it/

Apr 22, 2014 | Sector 210 Expander Black Dial Chronograph...

1 Answer

Manuel for yacht timer 700 please. Best regards P.Hessner


Could not find a download for instructions on this watch, but I did manage to find some basic instructions for the Sector brand. I hope this helps as this is the best I can come up with.
Good luck.
Sector Chronograph Watch Instructions
  • Most chronograph watches have screw-down crowns for water resistance. You must unscrew the watch crown before you can make any changes to the watch time. After time is set screw the crown back in. To utilize the chronograph dials, use the buttons on the side of the watch. One button will be for the second timer. Press once for the second hand to start timing. Press again to stop it. Another button will be to reset the second hand timer back to zero. Sector Chronograph watches may have different dial functions (see link in References).
  • Sector Dual-Time Watch Instructions
  • Because Sector watches are known for their sports capabilities, the Dual-Time watches have screw-down crowns. For Dual-Time timepieces, unscrew the crown counterclockwise. Pull the crown to middle position to set the date. Pull the crown out to its fully extended position and rotate it to set the day of the week, hour and time. Press and hold in the crown and turn clockwise to seal the crown back in to the watch.
  • Sector Ana-Digi Watch Instructions
  • Sector Ana-Digi timepieces have analog hands plus digital timekeeping functionality. To set the time, unscrew the crown counterclockwise and then clockwise to the appropriate time. The digital functionalities are programmed by the buttons on the side of the case. Depending on the style of the Sector watch, you can set the digital time with one button, set the date display, 1/100 seconds chronograph timer, altimeter, thermometer and alarm functions.
  • Aug 12, 2010 | Sector 700 2653700025 Watch

    1 Answer

    Watch is working fine but the chronograph is not


    sounds like it needs to be serviced under warranty. The clutch mechanism maybe jammed or broken.

    Apr 26, 2010 | Sector 2653940025 Wrist Watch

    1 Answer

    My sector watch has damage to the case ,where can i get it repaired


    To find a registered repair person in your area.
    GOTO:
    http://www.watch-clock-makers.org/
    Hope this tip helps.
    r/ David
    http://antiqueclock.clockstop.com/

    Mar 19, 2010 | Sector 550 Series Chronograph R3253993035...

    1 Answer

    Sector 250 Chronograph Alarm


    the middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
    pull the middle dial out to put it in alarm mode.
    To set alarm:
    -pull the center knob out.
    -with it out you can now use the bottom (right) knob to set the alarm.
    -pull the bottom right knob out one notch
    -turn the knob clockwise or counter clockwise to set the alarm time
    -push the knob back in (all the way)

    the alarm is now set

    if the center (right) knob is pulled out the alarm is ON
    if the center (right) knob is pushed in the alarm is OFF
    --------------------------------------------------------
    I have owned this watch for about 10 years now and love it.
    the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.

    repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!

    enjoy the watch!

    Dec 11, 2008 | Sector 2653940025 Wrist Watch

    1 Answer

    SECTOR 450 TIME ABJUST


    when looking at the face of the watch, the "dial" to the bottom-right is actually a screw-in, screw-out dial, it is not a push dial. Unscrew it until it is freed from the screw AND THEN pull it out two clicks, adjust time as needed...

    Apr 21, 2008 | Sector 450 2653450035 Wrist Watch

    Not finding what you are looking for?
    Sector 450 No Limits Watch Logo

    Related Topics:

    1,681 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sector Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18394 Answers

    staicuma

    Level 1 Expert

    3 Answers

    aravind shet
    aravind shet

    Level 2 Expert

    141 Answers

    Are you a Sector Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...