Question about LG Studioworks 700S 17" CRT Monitor

1 Answer

Error messages reappearing one after the other at Startup...4 msgs relating to Logitech items that have been removed from the PC, but the system insists on searching for the files.

Posted by on

  • laurietoo482 Jan 16, 2009

    This solution may be OK...I must wait til I can give it more time...Thankyou for your reminder. LD

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Hi again and thank for using FIXYA.
From start Run
Type msconfig (if you get an error message restart as administrator)
in startup tab check every line.
find and uncheck every line referring to removed application.
if you removed something you need you can always set the entry you removed.
Be very attentive to entry related to windows or display.
For an automatic search you can use windowsstartup.inspector

Posted on Jan 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My acer p205h moniter goes black after 5 secs on start up


Computer black screen of death is usually related to hardware or driver. It is typically caused by software errors in device drivers: in Windows systems by poorly written device drive , It also be caused by physical hardware faults, such as faulty RAM memory or power supplies, overheating of components, or hardware which is run beyond its specification limits . On the other hand, registry damage,corrupted program and viruses are the major causes of computer black screen,too. According to the issue you've got, the following tips may be available to you.1.An efficiency troubleshooting step on hardware is to start your computer with the minimum hardware necessary to run the operating system. If your computer starts successfully it proves that one of the removed hardware devices was the cause of the STOP message. Otherwise move to the next solution.
2.Boot your computer in Safe Mode by pressing F8 at startup. Then go to My Computer and right-click on Disk C to select Properties from the dropdown menu. From the Tools tab, perform an error check and disk cleaning. 3.If the about two solutions doesn't work, the last one I can suggest to you is to create a bootable disk. It is the most quick and effective way for you to solve the problem. You just need to download a software can be used to burn your CD/usb into a bootable one and then boot your computer from it. Run the software to fix the issue after that. There are a lot of software for you to use,Windows Boot Geniusowns a better performance among such kinds of software I've used.
By the way,reinstall your operating system can also help you out if nothing important stores in it.

Source:http://www.windowspasswordsrecovery.com/fix-windows/black-screen-of-death.html

Feb 26, 2013 | Acer P205H 20 inch Monitor

2 Answers

When the computer starts, the display appears....but instantly it turns black....and again i turn on the monitor the display reappears and then then instantly goes black....the same thing happens again and...


Please connect an external monitor to the PC removing the present one. If the PC boots and the display stays steady the fault is confirmed to be on the monitor. If so we need to check on the power supply before confirming that it is relative of the main board and will require closer look.
However if the display acts the same manner then PC motherboard has a fault , it can be with the display drivers, the power supply or the mother board.
Take consensus to estimate and decide.

Sep 15, 2011 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

Its slowing down and i want to reset everything were i could start off fresh


before you reset every thing lets do these steps

In order to optimize your computer performance, follow the instructions given below.
1. Delete all of the temporary files.
a. Click Start, Click Run(Window XP) and type temp(Window Vista and Window 7-type in the Start Search box which appears at the botton left hand side corner, once you click Start), hit Enter, (hit Continue if required), Click Edit at the top in the menu bar, click Select All, Right Click on Mouse and hit Delete. This would delete all of the temporary files.Note:in Window Vista and Window 7, Menu bar would appear by hitting Alt key.
b. Click Start, Click Run(Window XP) and type %temp%(Window Vista and Window 7-type in the Start Search box which appears at the botton left hand side corner, once you click Start), hit Enter, (hit Continue if required), Click Edit at the top in the menu bar, click Select All, Right Click on Mouse and hit Delete. This would delete all of the temporary files.
c.Click Start, Click Run(Window XP) and type prefetch(Window Vista and Window 7-type in the Start Search box which appears at the botton left hand side corner,once you click Start), hit Enter, (hit Continue if required), Click Edit at the top in the menu bar, click Select All, Right Click on Mouse and hit Delete. This would delete all of the temporary files.
2.Run Disk Cleanup to free up wasted space.Click Start, click My Computer, right click C drive and click Properties. Now, click Disk Cleanup. It will delete all of the useless temporary files.If it ask to click Next, click Next.
3. Run Disk check.Disk Check program is used to check and clean any errors on your computer and keep it running smoothly.
How to run Disk Check:Click Start, click My Computer.Right-click on C drive, click Properties.Now, click the tab, Tools. In the Error-Checking section, click the Check Now. Also, check both of the check boxes: Automatically fix file system error and scan for and attemp bad recovery of bad sectors.
Now, You will see a message box that says you can schedule the disk check to start the next time you restart your computer. Click Yes. The next time you restart your computer, it will automatically run through a disk check before displaying your login screen. After the disk check finishes, Windows will automatically bring you to your login screen.Note: Check Disk can take more than an hour to check and clean errors on your computer.
4.Defragment Your ComputerTo arrange the files in a sequential manner, it is recommended to defragment the hard drive. Click Start, click My Computer, right-click Local Disk, aclick Properties.Now, the Tools tab, click Defragment Now. Now, Click first hard disk, click Defragment.Note: Disk Defragment may take long time like 30-40 minute to complete.
5.Stop Programs from running at the startup.
As soon as you restart the computer a number of programs load themselves at the startup and you will be able to see them at the bottom right-hand side corner. In order to stop some of the programs (except security software and programs which you use immediately after starting up your computer) to load itself automatically, please follow these steps.
Click Start, Click Run(Window XP) and type msconfig(Window Vista and Window 7-type in the Start Search box which appears at the botton once you click Start),hit Enter, (hit Continue if required)You will see System Configuration Utility. Click Startup at the top right hand side corner. Now,uncheck the items which you want to stop to load automatically.Now, click Apply and then click OK or Close. Click 'Exit without restart'Now, you have to delete the startup from registry.Click Start, Click Run(Window XP) and type regedit(Window Vista and Window 7-type in the Start Search box which appears at the botton left hand side corner, once you click Start), hit Enter, (hit Continue if required),.Now, scroll up to the top and click Computer, rigth-click it and click Export and save it as file name say backup on the desktop.
In order to remove startup from the registry go the following locations:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftSharedToolsMSConfigstartupfolder
Right click startupfolder and click Delete.
HKEY_LOCAL_MACHINESOFTWAREMicrosoftShared ToolsMSConfigstartupreg
Right click startupreg and click Delete.
Restart your computer.
6.Uninstall the useless programs(like gaming softwares, unnecessary toolbars like my web search, myfreeze toolbar)Click Start, click Control Panel, Click Add or Remove programs(Programs and Features or Programs in Window Vista and Window 7),you will see a list of the programs. Click on the programs, you want to uninstall and click Remove(Uninstall in Window Vista and Window 7).
7.Scan the computer with good antimalware, antispyware, antivirus.
http://malwarebytes.org/http://superantispyware.com/
8.Update the drivers on the computer.Click Start, Click Run(Window XP) and type devmgmt.msc(Window Vista and Window 7-type in the Start Search box which appears at the botton left hand side corner, once you click Start), hit Enter, (hit Continue if required).Right click the device, click Properties.Click Driver tab, and click Update Driver.Follow the on screen instructions to complete update.
9.Upgrade RAMWindows can run slow if you do not have enough RAM.Many newer operating systems and programs use more RAM when they are running.How to check RAM.Click Start, right click My Computer, click Properties. You will see the RAM mentioned her.You should have at least 1 Gb(2 GB would be even more better)RAM.
10.Update Windows
Windows XP:Click Start, click Control Panel,Click Performance and Maintenance, Click System, click Automatic Updates tabclick Turn automatic updating on and click install updates.
Windows Vista:Click Start, click Control Panel, click System and Maintenance,click Windows Update,click Turn automatic updating on and click install updates.

PS Please Note to leave a positive note.

Jul 08, 2010 | E-Machines eMachines Monitor E15T4

1 Answer

HPL1506 The input signal from pc display foe few seconds and goes off error recommended setting - 1024 x 768 - 60Hz


It can be that your PC video resolution is set higher than 1024 x 768 @60Hz for the monitor to display correctly.
Spec: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00485268&lang=en&cc=us&taskId=101&prodSeriesId=1130384&prodTypeId=382087



Try this per HP:
HP Business Monitors - What Do I Need to Do When the Message Sync out of Range Displays on the Monitor? ISSUE: What do I need to do when the message Sync out of Range displays on the monitor? When the video card signal exceeds the frequency allowed for the monitor, the following error message may occur: Sync out of Range SOLUTION: To avoid the message, lower the resolution or vertical frequency of the video card. Reboot the system and use the VGA mode to force the video card driver to lower its resolution. Follow these steps.
  1. Shut down and restart the system. For consumer systems such as HP Pavilion desktop PCs, push the Power button once. For commercial systems such as HP business desktop PCs, hold down the Power button for five seconds.
  2. Immediately after seeing the HP/Compaq logo screen, press F8 at system startup to initiate the bootup menu.
  3. Scroll down to highlight Enable VGA Mode , and press ENTER .
  4. After Microsoft Windows completes its bootup process, access the Display Properties and select a desired resolution, which is compatible to the connected monitor.

May 20, 2010 | HP L1506 15" LCD Monitor

1 Answer

Our acer 19in LCD monitor goes blank after initial startup and msg "Input not Supported" appears. Startup msgs are shown but once Windows XP starts, this error appears


Your resolution is set above what the monitor supports.

when computer is first starting up hit f8 to get to boot modes.

choose Enable VGA Mode: This option starts Windows in 640 x 480 mode by using the current video driver (not Vga.sys). This mode is useful if the display is configured for a setting that the monitor cannot display.

When you are booted into windows you can then set your resolution to the highest that the monitor supports which is 1440x900

Let me know if this helps.

Mar 16, 2010 | Acer AL1916W 19" LCD Monitor

1 Answer

17 inch monitor goes blank


  • Prepare to diagnose the computer .
    1. Disconnect all peripheral devices.
    2. Perform a Hard Reset.
    3. Disable the Automatic restart on system failure option.
  • Remove any non-system disc from the computer . During startup, the BIOS checks different devices to locate the Windows operating system. If the boot order is set to check the optical disc drive or the card reader (if the notebook is equipped with a card reader) before it checks the hard drive, and there is a non-system disc in the CD/DVD drive or there is a memory card in the card reader, the boot will fail. This problem can be resolved by setting the BIOS to check the hard drive first.
  • Reseat the memory modules . If you are getting memory errors, most BIOS versions have additional tests that can be run to test the memory. There could be a problem if one of the sticks is defective or loose in the memory slots. To determine what is causing the memory failure, disconnect all electrical power, and then remove and re-insert the memory modules firmly into the slots. Some HP Notebook PCs come with two sticks of memory and have two memory slots. On most notebooks, the memory module compartment is located on the bottom of the case, but the exact position varies by model. On some models, the memory compartment is under the keyboard. See your User Guide for the exact location of memory modules on your notebook.
  • Reset the BIOS to default condition . If you have made changes in the BIOS setting, such as disabling a device or changing the boot order, it could prevent the computer form starting properly. To restore the BIOS to its factory-recommended settings, turn on the computer and press f10 to access BIOS setup, and then press f9 to load the default BIOS configuration.
  • Perform a memory self test . There are different reasons that you may see a memory error. There could be a physical problem or it could be a program error. If the error is a program error, you will most likely see a Windows error message. If there is a physical problem with a memory module, the computer may fail part way through the boot process. Most computers have a built-in memory test to help identify if the memory modules are seated properly and are free of errors. To run the memory test, turn on the computer and press f2 .
    • If the System Diagnostics screen displays, select the Start-up Test to run the system memory test. Press the Esc key once the memory test is complete.
    • If the BIOS Diagnostics screen displays, select Memory Test .
  • Reseat the hard drive . If you get a specific hard drive error message on a black screen indicating the hard drive error, reseat the hard drive. If the computer has been dropped or jarred, or the hard drive has been replaced recently, the drive may not be seated tightly. The hard drive LED should blink if the hard drive has a solid connection in the notebook. Refer to the on-line User's Guide for specifics on locating and removing / replacing a hard drive. HP provides video directions for performing this task for many computer models. Remove and reseat the hard drive firmly into the mounting bracket.
  • Test the hard drive . If you get a hard drive error message, you can test the hard drive. Many computer problems are related to soft failures (or degraded performance) on the hard drive. The HP Hard Drive Self Test will repair soft errors on the hard drive, but it will not report the errors. After the test is complete, restart the computer to see if test repaired the problem you may been experiencing. To run the hard drive test, turn on the computer and press f2 .
    • If the System Diagnostics screen displays, select the Hard Disk Test to run the hard drive test. Allow the Quick and Long Hard Disk Self Tests to run.
    • If the BIOS Diagnostics screen displays, select Primary Hard Disk Self Test . Allow the Quick and Long Hard Disk Self Tests to run.
  • Feb 04, 2010 | X2Gen MG19MY 19" LCD Monitor

    1 Answer

    Monitor display problem


    though itz very unclear n i don't understand the moral meaning of windows going down..!!..n wat is the link of windows going down with ur monitor..

    however, itz probably causing from faulty or defective smps or main/mother board..
    if not probably itz causing from the monitor itself..

    proceed to verify with the below stated steps, only if u r a professional..

    DO IT ONLY IF U R A PROFESSIONAL..
    ..plz do check the following as in order:..
    the Hardware part:..
    1) check mains/power supply..the fuse, switch, wiring n associated circuitry..

    2) [in case of desktop] thesmps itself may b defective/faulty..check the outputs of smps viz. 0v(black~ground); +12v(yellow); +5v (red, green~ps-on, violet~pg&grey~sb); -12v (blue);-5v(white); +3.3v(orange)..
    check the battery n adapter [main power], in case of laptops..
    replace with a standby n see..

    3) unplug mains supply..pick open/remove the cmos battery..check (above +3v)..resit..

    4) open the cpu n see if heat is generated..if not..replace the cpu n see..

    5) open the CPU Heat-Sink with fan out of thesocket..put some "Heat Sink Compound" (available in local electronicschip level spare market)between the cpu/processor and the CPU Heat Sink*** fan..resit/fit it tightly in position..

    6) on main/motherboard..see with a debug card for mb error..may b short..look fordefective capacitors(espabove1000mfd)/mosfets..go through the mb'ssouth bridge n the circuit lie around atx connector..the crystal clockgenerator (if cpu isn't heating up)..
    replace with a standby n see..

    7)seeif the ram(s) is loose/faulty..open clean/remove carbon & or oxideformed on the teeth with an eraser n resit it..or replace with a standbyn see..

    8)remove/clean dustneatly..dust is non-uniform in nature n may causejam/short circuitry/excess resistance n many more..resulting an increasein heat..

    9) if all above fails..just try to service the monitor..open and re-sould all the dry soulderings..itz probably is causing due to ur monitor's internal circuit dry-soulds..esp. at the crt base n around the horizontal output section (hot)..

    the Software part:..
    1)hv a licensed and UPDATEDantivirus installed (i prefer avg/kaspersky,remember, without updationa full version antivirus is useless)..

    2) download, install n run microsoft kb890830..http://www.microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en..

    3) download n run Startup Control Panel..http://download.cnet.com/Startup-Control-Panel/3000-2094_4-10039330.html..'removeall the unnecessary startup items from here..(if u can't find whatto remove, post me/us in ur comment with all the items listed in eachn every tabs herein)..

    4) remove all unnecessary software from add/remove programs..

    5) download, install n run 'Advanced System Care Pro'..http://download.cnet.com/Advanced-SystemCare-Pro/3000-2086_4-10399324.html..

    6)disable the following:..
    a)'Automatically Restart'right click on my computer->properties->advanced->startupn recovery->(un check on the) Automatically Restart;
    b)'Error Reporting'right click onmy computer->properties->advanced->error reporting->disableerror reporting->(uncheck on the) 'but notify me when critical erroroccur'..

    7) Increase the size of Virtual Memory, Initial: 1440; Maximum: 2880

    if u r not a professional, always better to seek advise from ur system admin/vendor....

    Nov 16, 2009 | HP Pavilion MX75 17" CRT Monitor

    1 Answer

    Will not display output from Computer


    Probably the video resolution or the monitor Refresh Rate (eg: 50/60/75 Hertz) is set too high in the operating system, which over-drives the monitor electronics and it is unable to display anything.

    If you restart the computer manually (hold in the power button for 5 seconds, the computer will shut off, turn it back on again) you will see the normal BIOS and Windows startup display on the monitor, but then as Windows completes it's startup it returns to the error message you see.

    To fix this, restart the computer manually and start the computer in Safe Mode. To do this press F8 just before the computer starts to load Windows, and choose Safe Mode. Once in Safe Mode, you should see the monitor working correctly.

    Now restart the computer in Normal Mode and everything should be fine.

    Dec 23, 2008 | Westinghouse LCM-19v1 Monitor

    1 Answer

    When I turn my monitor on a "Going to Sleep" message is displayed on a black screen and then the screen goes all black. We had a power outage acouple of nights ago and the pc was on. Since then our power...


    It will be video cable or related.

    Responding to prior post,
    Fuses have nothing to do with the video proper.
    If you have a message on the screen, which says the monitor is basically working or saying the fuses and inverter is working.

    That message appears with lack of video, so it can be the cable itself, possibly the video card on the computer.

    Dec 20, 2008 | HP Compaq 1501 15" LCD Monitor

    1 Answer

    Input not supported


    You may have a video resolution selected on your computer that the screen doesn't support.

    The reason you see the the initial startup message is because that is loaded from the bios, prior to the settings for the graphic card output being loaded.

    Try booting the computer in safe mode and adjusting the display resolution.

    Dec 29, 2007 | Acer AL1916W 19" LCD Monitor

    Not finding what you are looking for?
    LG Studioworks 700S 17" CRT Monitor Logo

    Related Topics:

    23 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top LG Computer Monitors Experts

    noel
    noel

    Level 3 Expert

    4740 Answers

    cizzan

    Level 1 Expert

    5 Answers

    micky dee

    Level 3 Expert

    2635 Answers

    Are you a LG Computer Monitor Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...