Question about Orange SPV M1000

1 Answer

Screen Replacement Just wondering if anyone knows exactly how to replace the M1000's screen yourself. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 146 Answers
Re: Screen Replacement

Hi there

download file from here for step-by-step guide to replace the M1000's screen yourself

All the Best.

Was this solution helpful? Show your Appreciation by rating it:

Posted on Feb 26, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

My screen doesn't respond on my viewty when I touch it, so I cannot access anything. Can I get this fixed? - Cheers, Debi

This can be fixed by purchasing a new digitizer.
Very low priced replacement. You can then have it replaced by a tech or replace it yourself.
Thanks for using fixya.

May 24, 2011 | PDAs

1 Answer

Screen is cracked

This is what you need, just fix it by yourself, if you know how to repair.

May 27, 2010 | HTC G1

1 Answer

My sidekick lx top screen is broken im looking for screen to replace it

i dont know which color of lx you have, but here is a link that you can get/buy:

and a link with the guide on how to replace it yourself:

good luck

Mar 04, 2009 | T-Mobile Sidekick

1 Answer

Pantech Duo C810

You should be able to get a replacement screen from If so and you want to replace it yourself, here are some steps. You will have to do some soldering. I found these instructions when looking for help on my pantech so I am just passing on this help. If you aren't comfortable doing the work yourself then RMS Logistics may be able to help. You can also check with your provider for a store near you that services phones for that provider.

This not a job for just anyone it will require some soldering on the circuit board. If you don't know how then it would be best to ship it off.

The steps to take apart the phone.
1. take the battery and Sim card out.
2. remove the molding place that surrounds the camera lens. It just snaps in. At first it did not look like it come off but is does.
3. remove 6 (six) tiny screws from the back of the phone.
4. lift the circuit board and carefully unplug the board in the next section. place the circuit board to the side.
5. Remove 4 silver screws, hold this piece to one of the sliders. - set this piece to the side.
6. remove 4 screws for the corners of this piece. two of the screws have covers over them
7. Ok this was a pain both getting it out and back in. you should see a circuit board and mic. The Mic is solder to the board and stuck to the piece below with stick-em. Carefully left the mic off do not break the wires - you just want it loose. Now lift the circuit board and carefully unplug the next circuit board. Set the circuit board and mic to the side
7. Remove 4 black screws hold the next slider in place.
8. Ok, you're down to the LCD piece. Again remove 4 screws in the corners. 2 of them have 1 long cover piece covering them.
9. remove the LCD piece, unsolder the speaker.
10. Solder the speaker just removed to the new LCD piece. and reverse the steps the reassemble.


Hope this helps.

Feb 19, 2009 | Pantech Duo Smartphone

1 Answer


dont know about replacement but someone I know had a bottle of CD scratch remover and tried it one day, it worked wonders. They also confirmed that McGuiers plastic polish does an amazing job. Take your time, apply multiple times, and use a lint free sunglass wipe to apply and buff with.

Dec 05, 2008 | Pantech Duo Smartphone

2 Answers

T Mobile Dash display Screen Issues

same problem with no answers from t-mobile

May 05, 2008 | T-Mobile Dash Smartphone

2 Answers

Freezing at the windows mobile 6 load screen(spv m1000)

Hey, seems your operateing system is corrupted in the flash memory.

solution 1

Reflash the operateing system. If you have the knowledge on how to do so.

2. Take it to the shop where you bought it for repairs and analysis motherboard might be damaged.

Good luck.
If you need more asistance, let me know.

Mar 17, 2008 | Orange SPV M1000

1 Answer

Broken Screen

The black liquid means the display is damaged beyond repair. That's the liquid crystal (LC) in the display (LCD). Where you send it for repairs would depend on the manufacturer, the store you bought it from, and if you have a service plan or not, but it's not something you can do yourself unfortunately. Been there too :(

Here's the link to the repair information page on the Palm website:

Let us know how you make out.

Nov 13, 2007 | Palm Tungsten E2 Handheld

1 Answer

Replace touch screen

Its easy to replace a screen on these phones, Just follow the directions from this pdf

Sep 27, 2007 | i-mate K-jam Smartphone

1 Answer

I have an orange spv 3100

hi there

download file from here for step-by-step guide to replace the M1000's screen yourself

All the Best.

Was this solution helpful? Show your Appreciation by rating it:

May 22, 2007 | Orange SPV M1000

Not finding what you are looking for?
Orange SPV M1000 Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Orange PDAs Experts

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

William Dehn
William Dehn

Level 3 Expert

318 Answers


Level 3 Expert

93848 Answers

Are you an Orange PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides