Question about Brother IntelliFAX 2800 Laser Fax

1 Answer

Fax always gets sent to the same number

Whenever I send a fax to anyone from office # 1, instead of reaching the intended recipient, the fax is received at the same number always - it goes to the office #2 which is close to office #1.
please help!

Posted by on

  • dbogoiavlens Jan 20, 2009

    I think I may know what the issue is, if you know for sure pls let me know..basically there is are two max machines on one tel line - the one downstairs can send and receive no prob, but the upstairs one cannot send, when I send from the upstairs fax, instead of going out to the intended recipient, it gets printed on the fax machine downstairs. - I guess there is a setting on the Brother printers called Easy Receive - this must be off - I have not had a chance to go the site, but I think that is it..pls let me know if you know for sure..thx

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 320 Answers

Need more info not clear

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Non-delivery notification "Your message did not reach some or all of the intended recipients" sending e-mail to contacts


This assumes that SOME recipients are getting the messages. If so, go your address book and find the addresses for the failed recipients. Then edit or delete and reenter them when you are sure you have the correct information

Jul 17, 2014 | Microsoft OFFICE 2013 HOME AND BUSINESS 1...

1 Answer

I need to make a funds transfer


Wire transfers are used to transfer funds through an electronic payment service.
Sometimes, companies make wire transfers to quickly pay suppliers.

The process requires a small amount of paper work.
Wire transfers involve transferring money from a company's bank account into the supplier's bank account.

The funds are available within a few minutes after the process is initiated.
Get recipient information.

Get documentation from the intended recipient that contains his name, company name, company address, bank account number and routing number.

Acquire the information via fax. If a mistake is made, the fax will prove that the information was supplied by the recipient.


Inform the bank officer that you would like to make a wire transfer. If you have never sent a wire transfer, it is best to go to the bank to complete the first wire transfer transaction.

Future transactions can be initiated via fax or though an online banking system. Provide your banking account information.

Expect the bank officer to ask for identification prior to processing the initial bank transfer.
She / He will want to confirm that you are authorized to make a wire transfer from the company bank account.

She / He will then access your account information to confirm the availability of the amount of the wire transfer.

The bank account number, routing number and company name will be listed on the wire transfer request.


Tell the exact amount of money to be transferred.
Make sure the amount is accurate.

Once the money is transferred to the recipient's account, you will not be able to make corrections without the help of the recipient.

For example, if you wanted to send $5000.00 but a mistake was made but instead $6000.00 was transferred, the recipient would have to initiate a wire transfer from his bank in order for you to get the $1000 that was sent by mistake.

Provide the name and address of the recipient.
If a company is the recipient of the funds, provide the company name and address.

Provide the bank account number of the recipient.
Provide the routing number of the recipient.


Review the wire transfer document for errors.
Prior to approving the transaction, check all of the information.

Nov 21, 2013 | Computers & Internet

1 Answer

How to send multi recepient


Given the model of the printer you indicated, I assume your use of the word "send" is in reference to the fax function. Sending a fax to multiple recipients is actually quite easy! Here's how you do it:

1. Load your document into the ADF (automatic document feeder)
2. Dial the fax number of your first recipient
3. Press the button with the check mark on it (DO NOT PRESS SEND AT THIS POINT)
4. Dial the number of your next recipient
5. Repeat steps 3 through 4 until you've entered all the numbers you intend to send the fax to
6. Once all numbers are entered, press SEND

That's all there is to it! If you found this solution helpful, please leave a positive rating!

Aug 23, 2011 | HP LaserJet 3050 All-In-One Printer

1 Answer

How to fax?


This section describes dialing and sending faxes directly using the Numeric buttons.

note:
  • A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switching systems, you have to dial the outside line access number first, and then the number of the party you are calling.
Sending a Fax with the Numeric Buttons .

Click here for other useful sending methods.


1. Preparing for sending a fax.(1) Make sure that the power is turned on.

(2) Load a document on the Platen Glass or in the ADF.

important:
  • When sending a double-sided document, set the document on the Platen Glass. You cannot scan double-sided documents from the ADF.







(3) Press the FAX button.
The fax standby screen will appear.
g0043276.png
(4) Adjust the density (scan contrast) or image quality (fax resolution) as necessary.
See "Adjusting the Sending Quality"

2. Sending the fax.
  • When the document was loaded on the Platen Glass:
(1) Use the Numeric buttons to dial the recipient's number.
g0043278.png
(2) Press the Color button for color sending, or the Black button for black & white sending.
important:
  • Color sending requires that the recipient's fax machine supports color faxing.
(3) Press the OK button.
The machine starts sending the fax.
note: When loading two or more documents

  • Load the next page, and press the same button as you pressed in (2) of step 2. Repeat the same procedure to scan all pages of the document, and press the OK button.
  • When you have sent the first page with the Black button, the following pages will be sent in black and white.

When the document was loaded in the ADF:

(1) Use the Numeric buttons to dial the recipient's number.
(2) Press the Color button for color sending, or the Black button for black & white sending.
The machine scans the document automatically and starts sending the fax.
important:
  • Color sending requires that the recipient's fax machine supports color faxing.
note:
  • To cancel sending a fax, press the Stop button, and follow the instructions on the LCD.

  • If documents remain in the ADF after pressing the Stop button during scanning, "Close the feeder cover [OK]Eject the document" will appear on the LCD. Press the OK button so that the remaining document is automatically fed out.

Automatic redialing
  • When sending a fax and the recipient's line is busy, the machine will redial the number after a specified interval. Auto redial is enabled by default. Auto redial can be enabled or disabled by selecting ON or OFF. Select ON to specify the number of redialing in Redial times and redialing interval in Redial interval.

Redialing the Number Dialed with the Numeric Buttons

1.Prepare for sending a fax.
(1) Make sure that the power is turned on.
(2) Load a document on the Platen Glass or in the ADF.
(3) Press the FAX button.
The fax standby screen will appear.
(4) Adjust the image density (scan contrast) or quality (fax resolution) as necessary.
See "Adjusting the Sending Quality"
2. Select the telephone number recently dialed.
(1) Press the Redial/Pause button.
Most recently dialed fax number using the Numeric buttons will appear.
(2) Use the g0016984.png (-) or g0008875.png (+) button to select the number to redial.
g0043279.png
(3) Press the OK button.
The selected number will appear in the fax standby screen.
3. Send the fax.
Press the Color button for color sending, or the Black button for black & white sending.
important:
  • Color sending requires that the recipient's fax machine supports color faxing.


Jun 03, 2011 | Canon PIXMA MX340 Wireless Office...

1 Answer

HOW TO SEND A FAX


You can send a fax in a variety of ways. Using the control panel, you can send a black and white or color fax. You can also send a fax manually from an attached phone. This allows you to speak with the recipient before sending the fax.
To send a basic fax (single- or multiple-page black-and-white fax) by using the control panel.These features allow you to control the pace of your dialing. They are also useful when you want to use a calling card to charge the call and you have to respond to tone prompts while dialing. NOTE: If you need printed confirmation that your faxes were successfully sent, enable fax confirmation before sending any faxes. TIP: You can also send a fax manually from a phone or by using monitor dialing.
1. Load your originals. NOTE: If you are sending a multiple-page fax, you must load the originals in the document feeder tray. You cannot fax a multiple-page document from the glass. 2. Enter the fax number by using the keypad, press Speed Dial or a one-touch speed dial button to select a speed dial, or press Redial/Pause to redial the last number dialed.TIP: To add a pause in the fax number you are entering, press Redial/Pause, or press the Symbols (*) button repeatedly, until a dash (-) appears on the display. 3. Press START FAX Black or START FAX Color. • If the device detects an original loaded in the automatic document feeder, it sends the document to the number you entered. • If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure your original is loaded print-side down on the glass, and then select Yes.TIP: If the recipient reports issues with the quality of the fax you sent, you can try changing the resolution or contrast of your fax.

Send a fax manually from a phone You can send a fax from a telephone on the same phone line if you prefer to use the keypad on your phone, instead of the keypad on the control panel of the device. You can do this by plugging in a phone into the 2-EXT port on the back of the device. When you send a fax manually, you can hear the dial tones, telephone prompts, or other sounds through the handset on your telephone. This makes it easy for you to use a calling card to send your fax. Depending on how the recipient has their fax machine set up, the recipient might answer the phone, or the fax machine might take the call. If a person answers the phone, you can speak with the recipient before sending the fax. If a fax machine answers the call, you can send the fax directly to the fax machine when you hear the fax tones from the receiving fax machine.
1. Load your originals. NOTE: This feature is not supported if you load your originals on the glass. You must load your originals in the document feeder tray. 2. Dial the number by using the keypad on the phone that is connected to the device. NOTE: Do not use the keypad on the control panel of the device when manually sending a fax. You must use the keypad on your phone to dial the recipient's number. 3. If the recipient answers the telephone, you can engage in a conversation before sending your fax. NOTE: If a fax machine answers the call, you will hear fax tones from the receiving fax machine. Proceed to the next step to transmit the fax. 4. When you are ready to send the fax, press START FAX Black or START FAX Color. NOTE: If prompted, select Send Fax, and then press START FAX Black or START FAX Color again. If you were speaking with the recipient before sending the fax, inform the recipient that they should press Start on their fax machine after they hear fax tones.
The telephone line is silent while the fax is transmitting. At this point, you can hang up the telephone. If you want to continue speaking with the recipient, remain on the line until the fax transmission is complete.

Send a fax using monitor dialing Monitor dialing allows you to dial a number from the control panel as you would dial a regular telephone. When you send a fax using monitor dialing, you can hear the dial tones, telephone prompts, or other sounds through the speakers on the device. This enables you to respond to prompts while dialing, as well as control the pace of your dialing. TIP: If you do not enter your calling card PIN fast enough, the device might start sending fax tones too soon and cause your PIN not to be recognized by the calling card service. If this is the case, you can create a speed dial entry to store the PIN for your calling card. NOTE: Make sure the volume is turned on, or you will not hear a dial tone. To send a fax using monitor dialing from the control panel
1. Load your originals. NOTE: If you are sending a multiple-page fax, you must load the originals print-side up in the document feeder tray. You cannot fax a multiple-page document from the glass. 2. Press START FAX Black or START FAX Color. • If the device detects an original loaded in the automatic document feeder, you will hear a dial tone. • If the device does not detect an original loaded in the automatic document feeder, the Fax from glass? prompt appears. Make sure that your original is loaded on the glass, and then select Yes. 3. When you hear the dial tone, enter the number by using the keypad on the control panel. 4. Follow any prompts that might occur. TIP: If you are using a calling card to send a fax and you have your calling card PIN stored as a speed dial, when prompted to enter your PIN, press Speed Dial or a one-touch speed dial button to select the speed dial entry where you have your PIN stored. Your fax is sent when the receiving fax machine answers.

Apr 01, 2011 | HP Officejet Pro L7680 All-In-One Printer

1 Answer

Problems sending to a particular number


Hi,

Try sending your fax to a lower baude rate to 14,000 bps, I had this problem before and I solved it by sending to a lower sending speed bacause the line was very noisey.

Mar 16, 2009 | Canon LaserCLASS Fax 710 Printer

1 Answer

Microsoft Outlook - access denied 554 5.7.1


Got through the following links.May be it will help to resolve your issue.

Click Here 1

Click Here 2


Thanks

Mar 12, 2009 | Microsoft Office Professional 2007 Full...

1 Answer

Hi how do I turn of tx and rx reports on faxcentre F110/


The machine can print a transmission (confirmation) report after each transmitted fax. This report indicates whether or not the fax has reached the intended recipient. Four different settings are available for the transmission report:
  • With: a report is printed when the fax transmission was successfully sent or when it is completely abandoned. There is only one report for each fax sent.
  • Without: no transmission report is automatically printed, however, the machine will save all fax transmissions that took place in memory. The faxes sent can be viewed by printing out a transmission log (report).
  • Always: a report is printed after each successful or interrupted transmission.
  • On Error: a report is printed only if the transmission failed or is abandoned.


NOTE: With each transmission report from memory, a reduced version of the first page is automatically reproduced.

To modify the report type setting:
  1. Press the [OK] button directly below the Display Screen. '1 Installation' and '2 Fax' will be displayed.
  2. Press [2], [5] on the numeric keypad. ‘25 >Send Report’ will be displayed.
  3. Press [OK]. The transmission report screen will be displayed.
  4. Press the up or down arrow button directly below the Display Screen to select a transmission report setting, then press [OK]. ‘25 Send Report’ will be displayed.

    NOTE: As the up and down arrow buttons are pressed, the menu will scroll through the available choices and move the greater than symbol (>). Stop when the greater symbol is in front of the appropriate selection.

  5. Press the [Stop] button on the Control Panel. The 'Date / Time' screen will be displayed

Dec 11, 2008 | Xerox FaxCentre F110 Plain Paper Laser

1 Answer

How do I fax?


Sending a fax from your computer requires a fax modem and that your operating system be configured to allow you to send and receive faxes.

to send from fax software
step 1 Prepare the document that you want to fax. Step2 Prepare a fax cover sheet, if desired. Step3 Open your fax software - such as Microsoft Fax or Microsoft Exchange. Step4 Look for an icon or menu command that allows you to send a fax - such as Send New and Send Fax. Click on that item. Step5 Follow instructions for entering the fax number of the recipient and any other requested information. Be sure to include area codes and long-distance information if needed. Step6 Indicate whether you wish to send a cover sheet. Step7 When asked to attach the file, follow instructions to attach the file that you want to fax. Step8 When ready, click Send. The fax will begin to compile the information and, when ready, will dial the remote fax machine. Step9 When the connection is made, the fax will be sent. To Fax From Your Word Processing Program Step1 Some software products, such as Microsoft Word, allow you to fax a document without opening your fax software. Step2 Open the document that you want to fax. Step3 From the File menu, select Print. The Print window opens. Step4 Instead of printing to your default printer, look for an option that allows you to Print to Fax. Select this option and click Print. Step5 You will be asked to provide the recipient's fax number and other assorted information as with a fax program. Step6 The fax message compiles, the modem dials. If the connection is made with the other modem, the fax will be sent.

Aug 26, 2008 | Computers & Internet

1 Answer

Getting this message below with ALL emails I send with Outlook


Do your messages actually get through or are they rejected? And is this with Outlook? It appears likely there may be a piece of malware involved...

If you need assistance, please let me know some more of the details. Thanks for rating FixYa!

Apr 28, 2008 | Microsoft Office Professional 2007 Full...

Not finding what you are looking for?
Brother IntelliFAX 2800 Laser Fax Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...