Question about Dishwashers

1 Answer

MY DISHWASHER DOESNT START - Dishwashers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dishwashers Master
  • 3,247 Answers

Will need some description of the problem, in particular what actions you have taken, for example, door is closed and you start wash but nothing happens. Or you do not see any lights on the panel. etc.
Please provide model number and make of dishwasher as well.

Posted on Dec 04, 2012

  • 2 more comments 
  • mythily Dec 04, 2012

    sam,

  • mythily Dec 04, 2012

    sam, Door is closed when I depress start button, the motor rotates for sometitime and then stops

  • mythily Dec 04, 2012

    its Kennmore ultrawash Quitequard4

  • Sam Dec 06, 2012

    normally once you close the dishwasher door and press start, the water inlet should turn on and pour water in. Then the wash motor starts. Usually there should be at least 1 to 2 minutes between these two events. Do you see water at the base of the dishwasher when you open the door.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dishwasher wont start. After pressing start the light(s) pressed blink but doesnt start. The delayed start is not selected


Hi

First make sure that nothing is blocking the drain pump assembly located inside the lower front panel of the dishwasher. If the issue returns after its cleaned then try to reset the dishwasher control by pressing the HEATED DRY button and hold it for 15 seconds, if its still not resolved then it means that the control board has gone bad and should be replaced. Hope this helps...please post back for further assistance.

Daniel

Aug 30, 2011 | Frigidaire Dishwashers

1 Answer

Our kitchenaid dishwasher model: kudio1lbl6, doesnt work. no lights, there is power at its box


Dishwasher does not work. The power is on but when you push start it doesnt go on. When you hit cancel it goes on for a few seconds then shuts off.

Sep 04, 2010 | KitchenAid Dishwashers

1 Answer

Water will not drain .cycle stops , will not start even on new cycle


The water will have to be evacuated first. there may be a blockage either in the outlet of the dishwasher or the drain connection under the sink. The dishwasher tries to drain at the very start of the cycle. If this doesnt happen then a new cycle wont start.

Jul 31, 2010 | Dishwashers

1 Answer

GE Nautilus dishwasher. Doesnt seem like motor is working


Dishwasher (Nautilus) not draining into sink but leaks onto floor.

Nov 10, 2009 | GE Nautilus 24" Built-in Dishwasher

1 Answer

Frigidaire portable dishwasher wont start


check the outlet where you plug this dishwasher into make sure you have power to it you may have a popped breaker. reply back if this is not the cause.

Nov 18, 2008 | Frigidaire 18 in. FDR252RB Built-in...

1 Answer

Bocsh dishwasher


CHECK UNDER THE SINK AND MAKE SURE THE WATER IS COMING INTO THE FILL HOSE. DISCONNECT AND RUN IT INTO A BUCKET TO CHECK. THEN IF THAT DOESNT WORK THENHIT THE DRAIN AND CANCEL BUTTON THEN START MACHINE.

Nov 06, 2008 | Bosch SHU3305 Dishwasher

1 Answer

Baumatic BDW5


http://www.manualnguide.com/dl/12334/ Here is the online manual

Oct 04, 2008 | Baumatic 23 in. BDW5 Built-in Dishwasher

1 Answer

Electicity going to dishwasher but when program dial turned it doesnt start program even though its switched on and door closed


small amount of water at bottom of dishwasher, electricity is going to the unit no breakers are blown, no light nothing responding on dishwasher

Sep 03, 2008 | Kenmore 16872 Built-in Dishwasher

2 Answers

Dishwasher beep twice but dont start washing


You may have a problem with the control board and needs to addressed by a qualified LG technician.

Mar 15, 2008 | LG 24 in. LD-12BW5 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Owen Barnes

Level 3 Expert

867 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...