Question about Computers & Internet

1 Answer

Router starts and stops - Computers & Internet

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 32,281 Answers

CONTINUAL DISCONNECTION OF WIRELESS CONNECTION
There are a few things that can cause you to lose wireless connection with your wireless router. 1. Weak signal strength, check the signal strength on your wireless card. If it is weak move the wireless router away from brick or concrete walls and if possible locate the wireless router higher up. 2. Have you secured your wireless router from people near your from unauthorized access? i.e. change the default password, setup encryption use WPA2 or WPA, change the default SSID, and turn off SSID broadcast, and for added protection, enable MAC address filtering which allows only the MAC address/es of your wireless card/s to connect to your wireless router. 3. You could be getting interference from electrical sources such as air conditioners, arc welders, washing machines etc. If so, the power supply to the wireless routers and computers etc should be connected to a surge protection power board, better still connect your computer equipment to an UPS (Uninterrupted Power Supply). 4. Check the channels of the wireless routers and access points in your area and change the broadcast channel on your wireless router to an unused channel or one that is currently used but has the weakest signal strength. This will minimize interference with your wireless router from other wireless routers and access points in your area.

Posted on Dec 04, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does router start then stop


They can do that if they overheat. Is the router hot? If there was a power spike or brownout, the router could have been damaged. Do you have a surge protection system?

Aug 29, 2014 | Computers & Internet

1 Answer

Streaming from linksys wireless router on second floor to sony BlueRay/TV on first floor. Encountering intermittent problesm with interruptiions in streaming; sometime it stops and starts back up;...


There are a disadvantage when the distance is too long.You will need a DBI antenna or a router repeater to enhance signal and transmission data.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 22, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I have a Ryobi RE175. It just stopped working


1. Shut the power off, and disconnect your Ryobi
router. It could be the start/stop switch. So, you
can begin checking the switch contacts using the
multi-tester. Set if at 1 x 10 Ohms. Put the probes
of the tester across the switch terminals. Pressing
the trigger on will move the tester indicator to zero
if your switch is okey. Otherwise, no moverment -
the trigger switch need replacement.
2. Should the trigger switch proved to be okey, Check
the carbon brush of the unit, short carbon brush??
you have to replace it.

Nov 03, 2009 | Electrical Supplies

1 Answer

Video stops and buffering after about 30 sec.


May be a video card issue, or you need to update your flash/java web codecs (usually what plays videos)

Jan 09, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Belkin Wireless Router won't connect to ADSL


Turn off your modem and your router. Turn your modem back on wait for 2 mins then turn on your router. Try to connect. If that does not work. Connect your computer to the ADSL directly and check if you can get on. if not call your ISP.

Jul 27, 2008 | Belkin (F5D5231-4) Router

1 Answer

Internet signal stops at router


I would start by upgrading the firmware on the router... even if its the same version just do it again something in the software could be corrupt. Now make sure your getting the firmware for the exact router model #. After upgrade before you plug the router in reset the modem... then re-run the wireless network wizard. Do all of this and let me know if your wireless works now and we'll move to the next step.

May 20, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Different problem


Um double check this set "WEP Encryption" 128 bit
set the "Key Type" to ASCII
type a 13 digit password into key 1 and click Apply

If it is still messing up start over and default the router. Update the firmware and try again. All else fails and no encryption keys will set.Change the name of your SSID and stop broadcasting the SSID or buy a new router maybe sounds like a software issue updating the firmware could correct though.

May 06, 2008 | D-Link DSL-G604T Wireless Router

1 Answer

Actiontec GT704-WG wireless connection not working


Hi,
you say it suddenly stopped working, if you can connect to the router via ethernet cable then try to access the router's web utility page and make sure your router is in mixed or G-only. If you can't still connect to the router through wireless then try restarting the Wireless Zero Configuration from windows. This is how it's made: Go to control panel and double-click "administrative tools", then double-click "services". You will see a list, scroll down to Wireless Zero Configuration and click "stop", you'll see a progress bar. After that click "start", you'll see another progress bar. Now try connecting to your router via wireless connection. If you still can't connect then repair the connection by right-clicking the wireless icon at the bottom right corner. Keep repairing until you connect.
Hope this works!

Feb 16, 2008 | Actiontec GT704WG Wireless Router...

3 Answers

Edimax wirless router 6114Wg needs restart to start working


Sounds like a port issue. Follow the below link for more info on port forwarding. This needs to be done for programs like utorrent or emule and many others. http://www.portforward.com/english/applications/port_forwarding/Utor/Utorindex.htm or just check out http://www.portforward.com Good Luck

Sep 27, 2007 | Edimax BR-6114Wg Router (BR6114WG)

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...