Question about Linksys Wireless-G WRT54GX Router

1 Answer

Firmware is missing

When i try to update my firmware, seems that the connection got an error so the firmware was lost. i have to upload the new firmware so the router works. how can i upload the firmware to the device?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 7,627 Answers

Here's the support website the instructions, download and save the firmware to a folder or desktop.I didn't see a firmware update :http://homesupport.cisco.com/en-us/support/routers/WRT54GX

Posted on Dec 03, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: 3rd party firmware broke my router!

did you check whether you have downloaded the correct firmware for your linksys???

Posted on Dec 04, 2007

  • 9 Answers

SOURCE: I Upgraded RV042 to latest firmware from Linksys Site and now Router Continually reboots

i think there might have been some sort of virus(spyware, adware, trojan)

Posted on Dec 30, 2007

  • 3 Answers

SOURCE: Updated Canadian firmware

check the exact model of your router with the version number.. it can be found underneath the device itself.. you could also check the firmware on the router's page by accessing it, then go to the status tab.. on that kind of routers, if the firmware ranges from 1.50.0-1.51.2 you need to upgrade that because it gives you a problem.. the latest version is 1.52.2.. those are routers of version 5 and 6.. you can download the firmware at www.linksys.com/downloads.. select NA and usa first then type your model number and select your version number.

Posted on Feb 21, 2008

stif_NEC
  • 441 Answers

SOURCE: A lot of problem WRT54GR with DHCP, gmail, hotmail, google earth, deezer.com ...

Try settings up the MTU to manual.

1500/1400/1300 for cable connection.
1492 for DSL. if this may not work then yes, you need to upgrade the firmware.

Posted on Aug 22, 2008

  • 13 Answers

SOURCE: Linksys WRT160N Connection Issues.

Sadly, this router has horrible reviews and is known for this problem:

http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16833124277

Can you return it for another model?
Can you getLinksys to replace it?

the best one is the LINKSYS WRT54GL, but if you are stuck with the one you have...

If you have tried all these things and you are very brave (or don't care if you need to buy another router) why not try flashing it with an after market O/S?

1) http://www.coderetard.com/2008/05/30/install-dd-wrt-firmware-on-linksys-wrt150n-wrt160n-wireless-routers/

2) http://www.dd-wrt.com/phpBB2/viewtopic.php?t=32576&highlight=wrt160n

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luxor LED550FHD Wont start


I'm afraid if the power was lost during the update, the TV has a real software problem. But you don't have the tools to put in a complete set of new firmware. When the TV is still working, the processor and the program can manage the upload to the memory and after a restart everything should work fine. But no perfect firmware in the TV now that can do the upload rot the flash memory. A technician has to connect the TV to a computer and flash the firmware manually.
The best thing is to contact a certified service centre from luxor and ask them.

Sep 06, 2014 | Luxor Televison & Video

1 Answer

My WRT54GS router is not connecting to the net


I think you don't need to upgrade the firmware.
The router might have lost the connection to the modem.
You can try to reset and reconfigure it. Or you can also try to upload or re-flash the same firmware on your router.

Connect the computer to the modem and make sure that you have active internet through the modem.
Connect the modem to the router and computer to the router.
Open the setup page of the router and reconfigure it manually.
See Setup Linksys router

Jan 05, 2012 | Linksys Computers & Internet

1 Answer

My 5250 printer cannot load paper properly. It loads unevenly and displays error messages 3424, 3618, or lately 3520. I tried to upload new firmware, but no new firmware is available.


Hi there.
The error 3520 requires a firmware upgrade. Please click on this link for the firmware update.
Installation Instructions:
  1. Verify that the KODAK All-in-One Printer Home Center Software is installed and can communicate with your printer.
  2. Download the firmware file to your computer.
  3. Double-click the *.exe file, then follow the on-screen instructions. Wait for "Update complete! You may now use your Kodak Printer." to appear on your computer.
  4. Click OK to complete the firmware installation.
If your using a Mac, please click on this link.
Let me know if you need further assistance.
Thank you!

Aug 10, 2011 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

I'm trying to update the firmware on my Iomega Network Home Media Hard Drive (1 Tb) using my Mac. The drive has worked flawlessly, but I'm still using firmware 1.029. I've downloaded the new firmware...


The instructions for updating the firmware from the older version is here

www.iomega.com/support/manuals/hmnhd-1011-1208/en/main.html

If it is not rebooting itself and coming up in the new firmware, i would assume that I had neglected to hit the apply button.

You might find more information on that site, but I can't see any mention of a hardware or software lock on updates.

Feb 10, 2011 | Computers & Internet

1 Answer

How do I solve a 49.2f01 error and what could be the problem?


Error 49.2f01 indicated corrupt Firmware, which are Programming instructions that are stored in a read-only memory unit inside the printer and it can be fixed by downloading and the updating the firmware through the following process:

Updating the firmware
Update the printer firmware by loading the new firmware file from the computer. You can find new
firmware files for your printer at www.hp.com. Click here to download latest firmware and firmware updating utility.
1. Open the HP Printer Utility.
2. In the Configuration Settings list, select Firmware Update.
3. Click Choose, navigate to the firmware file that you want to upload, and then click OK.
4. Click Upload to load the firmware file.

Please refer to PRODUCT USER MANUAL (Page-29) before proceeding.
Let me know if any further clarification/ assistance is required.

GoodLuck!
Dont forget to appreciate the solution if I could have been of any help!
CreativeTECH

Dec 09, 2010 | HP LaserJet 4700 Printer

1 Answer

Firmware Upload Error Code: 7777


According to Sprint, If your phone already has the most current firmware installed it will generate this error code when you try to update it. Error code 7777 simply means there is no firmware update available. So no worries, you're good.

I got the same error and message on my LG LX370 when I tried to download the latest firmware on my new phone. I called Sprint and we tried just about everything before a supervisor confirmed that that was all the error code meant.

DK 12/04/2009

Jun 03, 2009 | LG Lotus Cell Phone

2 Answers

49 2f81- error


From the service manual:

A critical firmware error has occurred. This type of error can be caused by invalid print commands, corrupt data, or invalid
operations. In some instances, electrical noise in the cable can corrupt data during transmission to the MFP. Other causes include poor quality parallel cables, poor connections, or specific software programs.

To fix:

1 Turn the MFP off, and then turn the
MFP on.
2 Upgrade the firmware.
3 Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance.
4 If the message persists when using different software programs and attempting specific print jobs, disconnect all of the cables that
connect the MFP to the network or a computer.
5 Turn the MFP off.
6 Remove all DIMMs and flash-memory cards. Do not remove the firmware memory card that is in slot 1.
7 Remove all of the EIO devices.
8 Turn the MFP on.
9 If the error message disappears, reinstall each DIMM, flash-memory card, and EIO device individually, making sure to turn the MFP power off and then on again as you install each device.
10 Replace the component that caused the error message.
11 If the error persists, replace the formatter.

To upgrade firmware:

The MFP has remote firmware update (RFU) capability. Use the information in this section to upgrade the MFP firmware. The overall process involves the following steps:
1 Determine the current level of firmware that is installed on the MFP.
2 Go to the HP Web site and find out whether a firmware update is available. If an update is available, download the latest firmware to your computer.
3 Transfer the new firmware from your computer to the MFP.

Determining the current level of firmware

To determine the current level of firmware, view the configuration information on the MFP control panel. To view the configuration information, follow these instructions.
1 Press MENU.
2 Touch INFORMATION.
3 Touch PRINT CONFIGURATION. The configuration page prints.
4 The firmware datecode is listed in the section called Device Information. The firmware datecode has this format: YYYYMMDD XX.XXX.X. The first string of numbers is the date, where YYYY represents the year, MM represents the month, and DD represents the date. For example, a firmware datecode of that begins with 20040225 represents February 25, 2004.

Downloading the new firmware from the HP Web site

To find the most recent firmware upgrade for the MFP, go to www.hp.com/go/lj4345mfp_software. This page provides instructions for downloading the new firmware version.

Transferring the new firmware to the MFP

This procedure requires that you install HP Web Jetadmin Version 7.0 or later on the computer. See Using HP Web Jetadmin software. Complete the following steps to update a single device through HP Web Jetadmin after downloading the .RFU file from the HP Web site.
1 Start HP Web Jetadmin.
2 Open the Device Management folder in the drop-down list in the Navigation panel. Navigate to the Device Lists folder.
3 Expand the Device Lists folder and select All Devices. Locate the MFP in the list of devices, and then click to select it.
If you need to upgrade the firmware for multiple HP LaserJet 4345mfps, select all of them by pressing the Ctrl key as you click the name of each MFP.
4 Locate the drop-down box for Device Tools in the upper-right corner of the window. Select Update Printer Firmware from the action list.
5 If the name of the .RFU file is not listed in the All Available images box, click Browse in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you
downloaded from the Web at the start of this procedure. If the filename is listed, select it.
6 Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. After the upload is complete, the browser window refreshes.
7 Select the .RFU file from the Printer Firmware Update drop-down menu.
8 Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the MFP. The control panel shows messages that indicate the progress of the upgrade. At the end of the upgrade
process, the control panel shows the Ready message.

Using HP Web Jetadmin software

HP Web Jetadmin is a Web-based software solution for remotely installing, monitoring, and troubleshooting network-connected peripherals. The intuitive browser interface simplifies crossplatform
management of a wide range of devices, including HP and non-HP printers. Management is proactive, allowing network administrators the ability to resolve printer issues before users are affected. Download this free, enhanced-management software at www.hp.com/go/webjetadmin_software.
To obtain plug-ins to HP Web Jetadmin, click plug-ins, and then click the download link that is next to the name of the plug-in that you want. The HP Web Jetadmin software can automatically notify
you when new plug-ins are available. On the Product Update page, follow the directions to automatically connect to the HP Web site.
If installed on a host server, HP Web Jetadmin is available to any client through a supported Web browser, such as Microsoft Internet Explorer 6.0 for Windows or Netscape Navigator 7.1 for Linux. Browse to the HP Web Jetadmin host.

Replacing the formatter

1 Slide the formatter cover toward the left side of the MFP and remove it.

394646e.jpg

2 Remove two thumb screws (callout 1).

9837c30.jpg

3 Slide the formatter toward the left side of the MFP, and then remove it.

3a9ce7c.jpg

NOTE Dislodging the formatter might require considerable force.



I hope all this information helps! Thanks and please take a moment to give this solution a rating of fixya.

Feb 17, 2009 | HP LaserJet 4345mfp Printer

1 Answer

System Error on yp-z5


Hello,
I have resolved my problem by using a firmware updater specific for YP-Z5
You can download it here: http://dump.ru/file/540116/ it is called MCL.rar

After that :
1_install the firmware updater
2_hold the center button while connecting your player , in order to put-it in recovery mode
3_wait for the program recognizing the player and updating it

for me , my player was totaly bricked and now it works very nice

Regards

Nov 23, 2008 | Audio Players & Recorders

2 Answers

My PC wont recognise the F11 is connected.


One suggestion is to update your camera firmware it may solve your problem. below is the report from the web: Firmware Update for FinePix F10 - Windows Purpose of File: This Firmware (Ver.1.02) update will revise the internal software of the FinePix F10 digital camera. Installation of this update is optional. It incorporates the following nhancements: 1) Correction of English displayed on the LCD monitor 2) Updates the compatibility of the PictBridge function with some printers 3) Correction of an error that would not allow some computers to start up if the camera was connected and turned on. follow the below link to get the firmware: http://www.cameratown.com/firmware/index.cfm/hurl/pid|43870011

Aug 22, 2007 | Fuji FinePix F10 Digital Camera

Not finding what you are looking for?
Linksys Wireless-G WRT54GX Router Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...