F (x) keeps appearing on the screen - Office Equipment & Supplies

If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

1. Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
2. Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it.
3. Wait until the silver Apple logo appears.
4. When this happens, you can let go - the iPhone is rebooting

posible owerheating need proper check

Sounds like your charger isn't working. Meter it. Also possible, it may nt be working IN the phone.

hi..i think you have a problem the CPU/Computer that's whystays on screen for so long.1st step check the IDE cable connection form the mother board to Hard Drive and 2nd check the memory or check all hardware`s.Good Luck and Have a nice day

There is no feasible way to fix this. The problem is a short in the circuitry of your flat screen. If the monitor is off warranty, it's cheaper to replace the monitor than to have it repaired.

i) whenever u keep ur system idle for few minutes or longer time ur system goes in screen saver mode, in order to know more about it......

Screen Saver Mode: when u keep ur system idle for few minutes(say more 10 min or any or u might u kept system idle while you some work to doo...) in such a case u will have graphical picture of a blue screen evolved on your screen, you can even changethe picture or screen saver and keep your own.....

right click on desktop(close all the windows) and select the button Screen Saver and configure to apply your own screen saver(try to explore and learn about it....



Thankin you

M. Sridhar

No, it means that tomtom cant read the systemfiles.
See http://www.tomtom.com/support/index.php?Language=1&query=red+cross&FID=1898

Turn on the main and sub power switches.
Keep pressing the
* button until the message
“Please enter service password.” appears.
Input 9272 as the password and press the
[Start] key. (The password is fixed and cannot
be changed.)
[Mode Select Menu Screen]
Press the key of the mode to be selected on the
screen. To return to the Mode Change Menu
Screen, keep pressing the
* button until the
screen appears.
When the adjustment ends, press
[1. Normal Mode] key and the basic screen will appear

have the keyboard replaced....that should fix the issue