Question about Vacuums
How do you take the head off
The G2000 kirby is the same procedure as the G5 Kirby. As it happens I put a solution up on YouTube showing how to change the belt and to do this you need to take the head off. Long story short if you watch my video you will see how to take the head off. If you need anything for your Kirby like kirby bags or kirby Belts just visit VacuumSpot
Posted on Dec 06, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Kirby g2000 shampooer
Your belt is not properly connected. Here is the instructions to properly install the belt on the main power nozzle. It works exactly the same way as the shampooer head, so this should be of help...
Here is the instruction guide for the shampooer also. Hope this helps...
Posted on Jun 28, 2009
SOURCE: Kirby g2000 not picking up dirt
It is most likely the belt. You cannot reverse the suction. First check to see if the bag is expanding when running. If the bag is blowing up then it is the belt if not it is clogged just take the bag off from the vacuum and remove the head you will see the obstruction.
Posted on Dec 18, 2009
Tips for a great answer:
Dec 16, 2009 | Kirby G6 Bagged Upright Vacuum
Dec 08, 2009 | Kirby Vacuums
Aug 15, 2009 | Kirby Ultimate G Bagged Upright Vacuum
Jun 10, 2009 | Kirby G6 Bagged Upright Vacuum
Jul 07, 2008 | Kirby Ultimate G Bagged Upright Vacuum
Aug 22, 2007 | Kirby Ultimate G Bagged Upright Vacuum
84 people viewed this question
Usually answered in minutes!