Question about Datacard SP75 Plus Card Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most likely your Mag-stripe info is missing from the card project in IDworks.
If you imported your projects from preface, its likly the box to include mag-stripe config was not transfer d.
enter idworks designer and click VIEW then field connections, there should be some info tied you mag-stripe field 1,2, or 3 of not there is the problem.
Next check printer plug ins in IDworks admin to make sure the mag-stripe plugin is installed. Also i would check Datacard.com Download section make sure you have newest and correct driver for your OS
if none of this works, uninstall everything (exporting projects) and reinstall.
Mag-strpe encoders can become defective, the encoder may need to be replaced.
Posted on Mar 18, 2010
SOURCE: Datacard CP40 Plus printer with
Sounds like you are using an incompatible ribbon. Please post the configuration for the printer which is on the left side under the cover (white sticker) and your ribbon part number. If you are sure both are correct you may have a defective print ribbon or your printer will need service.
Contact TulsaBiz.net for more info
Posted on Aug 15, 2011
Tips for a great answer:
Jul 09, 2012 | Datacard SP75 Plus Card Printer
Jan 20, 2011 | Datacard Group Datacard SP75 Color Card...
Jan 02, 2010 | Datacard SP35 Printer
Aug 20, 2009 | Datacard Group SP75 Color Card Printer
Aug 25, 2008 | Datacard Group SP75 Color Card Printer
Nov 28, 2007 | Datacard Group SP75 Color Card Printer
89 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: