-   i have a yobo controller for my ps3 and i cant get it to work! the lights on the controller keep flashing and even when i charge it, it doesnt work.. i never used it before. what do i do?-   tripnmyself
I just bought a used one today and took me a little while to get it to work. Plug the USB receiver in and turn on the PS3. Press the Mode button and the lights will flash repeatedly at a fast rate (it's searching for the receiver). When it finds the USB receiver, the lights will still flash, but slower than before. When they're doing this, press the mode button again, and that should be all that you have to do. You can also plug the receiver in USB slot one, the charge cable in slot 2, and do the steps to set it up to make it work while charging. (I tried taking the receiver out while charging, and the lights started flashing again so I guess the USB receiver has to be in at all times)
ive got all the cords plugged in right and it worked fine yesterday but today it just decided to be...
(More)
ive got all the cords plugged in right and it worked fine yesterday but today it just decided to be difficult.
I bought a fc twin system to play nes and snes games. The screen is scrambled like the games are...
(More)
I bought a fc twin system to play nes and snes games. The screen is scrambled like the games are dirty. Any any suggestions?
We have connected the AV cords as shown on the box and the power cords, but cannot get game to show...
(More)
We have connected the AV cords as shown on the box and the power cords, but cannot get game to show on television. Thank you in advance for your...HELP!