I have a jensen mvb85a overhead dvd player and the screen is broken, well the 4 screws that hold the screen to the dvd player have all pulled throught the plastic, i am trying to find out where i can get a new screen
I just pulled a nearly new one out of our Expedition prior to trading it in. I have the unit only with remote. No mounting braket and I kept the headphones for our new vehicle. Will consider all reasonable offers.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
2 WAYS FOR SET UP. IF INSTALLED THERE IS A ON/OFF SWITCH SOMEWHERE IN DRIVERS REACH THAT WILL TURN ON A FM MODULATOR. THEN TUNE TO A CHANNEL ONE BY ONE TILL YOU HERE DVD MOVIE SOUND. ONCE YOU FIND THAT CHANNEL LOCK IT IN.
SECOND SET UP. THE MENU ON SCREEN MAY HAVE SOMETHING THAT MAY SAY "FM MOD" MAKE SURE IT'S ON AND THAT MENU WILL HAVE AN OPTION FOR SELECTING AN FM CHANNEL. TRY IT OUT.
answer - had the same issue turned out to be 3 dvds in it, Remove the 4 screws holding the dvd player to the roof. wire harness will hold it up. There is an fm transmitter on top held on by three screws. remove the little screws and push the transmitter to the side. you winn now see the stuck dvds. push the extras out with a small screw driver. once they are out the eject button will eject the last dvd.
just worked for me hope this helps.
hi, i took the whole thing apart and i noticed the laser wasn't coming on, so i found where the laser is connected to and the connection was not pushed in all the way in so i pushed it in all the way, now it works.
the motor will not be strong enough to eject. you can try the emergency eject hole with a paper clip . just push straight in and the gears will began to turn so push straight in a couple of times and it should began to eject.
The green with white is for the back up camera option, if you dont have a camera dont hook it up. If you use th remote when in the dvd mode press setup on the remote, then enter 5 4 3 2 1 0 (with the numbered keys) then holding 0 for 4 seconds, this will take you into a screen where you can shut off the parking brake overide. Now you dont have to hook up the pink wire.
Problem: All DVDs would not play in Jensen MVB85A overhead 8.5 DVD player. Error code: "Incorrect Region Code"
1. Use the remote to power on DVD player 2. Ensure there are NO DVDs in the drive 3. When you see the DVD logo screen, press 9653 on the remote 4. A hidden menu will open stating the region code. My region code was set to 0 and my I was receiving the error. 5. Press the "OK" button to change the Region Code to "1".
Once the region code was set to 1 all DVDs were playing.
Key words: Jensen Audiovox MVB85 incorrect region code