Question about Kenmore 63942 Dryer
Roper gas dryer wont get hot
The first thing to check is the thermal fuse. It is located in the back of the dryer, and you need to remove the back panel to get to it, which involves taking out about a dozen screws. To check it, unplug the dryer, pull the wires off the thermal fuse, connect them to each other with an alligator clip lead, plug the dryer in and see if the dryer gets hot.
Posted on Jan 11, 2009
http://www.pcappliancerepair.com/model-display.php This is a good site for parts and help. You can see the screws #2 holding the front on. Release the spring clips #20 with a putty knife in the gap on the front.
Posted on May 09, 2009
Posted on Jan 15, 2010
SOURCE: dryer wont stay hot
Assuming you have removed the lower access panel (two or three scres all the way at the bottom of the lower front panel) to view the glow plug (ignitor), if you see the ignitor cycle on but the gas does not ignite after the machine initially heated in the beginning of the cycle you will want to replace your gas valve coils. They are the round black things mounted to the top of your gas valve.
This should solve your problem.
Good luck to you!!
Posted on Jul 13, 2010
Tips for a great answer:
Sep 16, 2011 | Roper Dryers
Aug 14, 2011 | Roper REX3614KW Electric Dryer
Aug 10, 2011 | Roper RGX4634KQ Gas Dryer
Jul 05, 2010 | Roper REX3614KW Electric Dryer
Mar 19, 2010 | Dryers
Jan 15, 2010 | Roper REK2950W Electric Dryer
Oct 21, 2009 | Roper Dryers
Sep 05, 2009 | Roper RGS7646KQ Gas Dryer
May 17, 2009 | Roper RGX4634KQ Gas Dryer
176 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: