Question about Uniden Cordless Phone
I have replaced battery with a new one, same results.
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Disconnect your phone from the wall and charger....Take out the Batteries and wait 2 secs...Replace batteries and recconnect phone ..see if this problem is still happening.
1. Disconnect Battery from handset(s)
2. Disconnect Phone Cord from wall jack
3. Disconnect Phone cord from base unit
4. Disconnect AC adapter from wall outlet
5. Allow to sit for 30 min
6. Reconnect Phone Cord to base
7. Reconnect Phone cord to wall jack
8. Reconnect AC Adapter to wall outlet
9. Reconnect Battery to hanset until you click or feel the plug snap into place
10. Re-Register Handset by placing on main base in most instances.
Heres a site for more help:http://mycusthelp.net/UNIDEN/supportkbitem.asp?sSessionID=&Inc=1093&sFilA=Product&sFilB=Model&sFilC=&FA=-1&FB=-1&FC=-1
(Copy paste to browser)
Posted on Mar 09, 2010
I don't know if this helps, but perhaps the problem is using two or more phones. On a whim, I charged a Uniden EXP 970 that my daughter gave me a few years ago. Charged right up and it has been working for about two days. I didn't think it would charge at all but to have it actually work, I was amazed!! Will post if it quits anytime soon.
FYI I bought two phones from AT&T, each around $200 and neither of them worked after a week. I was not happy! These less expensive phones seem to do a much better job!
Posted on Mar 06, 2008
try connecting both phones via the base that is working and see if they recognize each other. Let me know if that works.
Posted on Jul 21, 2009
Unplug your phone line and power cord from the back of phone. Wait a few seconds and plug back in. Try your phone. It shoud be working. If 1 one of your batteries got so low that the phone cut off the rest of your phones did too. I don't know why, I just know this is not the first I hear of this issue with the newer Uniden cordless phones. Hope this helps you. Good luck!
Posted on Jan 29, 2010
It sounds like your hansets are no longer registered to the base unit. Since you have not listed the specific model phone you have I cannot give you specific steps to re-register the handsets to the base, however if you go to http://www.uniden.com/index/manuals_results.cfm?cat+1 you can find the manual for your phone and follow the instructions for re-registering the handsets
Posted on Feb 26, 2010
Tips for a great answer:
Jan 05, 2015 | Uniden Cordless Phone
Jul 01, 2011 | Uniden D1680 Cordless Phone
Apr 17, 2010 | Uniden Cordless Phone
Nov 29, 2009 | Jandy AQUALINK RS TELELINK KIT
Jul 21, 2009 | Uniden Cordless Phone
Nov 09, 2008 | Uniden Cordless Phone
Jul 04, 2007 | Uniden Cordless Phone
36 people viewed this question
Usually answered in minutes!