An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: i need drivers for 5200 speed stream
On the left side, scroll down to the drivers under your device and download the drivers, then install.
Thanks for using Fixya.com and please rate this accordingly. Let me know if you have any other questions.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The picture showing here looks like a speed stream modem. You will need to install your ISP software so the system knows you have an account with them (if this is a new service for you). If you've had the service for a while, but had your computer worked on, as long as all the ports work, you should be able to just plug and go. Your username and password for your ISP (Internet Service Provider) are memorized inside the modem, so as long as you haven't shut it off, you shouldn't have a problem.
On the computers that are not getting Internet access, check the LAN cables to the router. Does the Link LEDs on the router for these computers are ON?
If the LED lights are off then the LAN cable and/or network cards are faulty.
Check Device Manager on these computers to see if the LAN card is working and enabled. If not re-install the LAN drivers. If the driver installation cannot detect the LAN card then most likely the LAN card is faulty and needs replacing.
Get back to me with the results of these tests and I can advise what to do next.
when it comes to mac you got to check with the network settings.
If the modem you are using has a DHCP program enabled, then you will have to configure the network settings (configure ipv4) using dhcp
and renew the ip address, if not then you will have to create a manual connection(internet connect) in the same network settings and use your ISP provided user name and the password to connect.
When your internet is connected using internet connected the enet light will be off on the modem
type your ip adress into you web browser, this should take you to the configuration screen, there should be a tab that says security or something like that, select the type of security that you want, and it should assign you a wireless key automatically, hope this helps
Visit this link http://www.modemsupport.com.au/. On the left side under the heading Speedstream 4200 download and isntall both the drivers and firmware.
Once you've installed the firmware open iexplorer and goto http://192.168.254.254 . Type in an admin password and save settings. Type in your username and password ( provided by your isp ) press save again and then press connect. you should be in business.