Question about ASUS P4PE2-X Motherboard

1 Answer

I dont no

When start computer ,computer turn off alone

Posted by on

  • Dick
    Dick May 11, 2010

    I'm sorry, but that is simply not enough information to fix your problem. Try reading some of the other solutions here and doing the basic troubleshooting suggested, then post back here with what you found.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

Make sure your power is plugged in snugly. Also make sure your fan is on when you turn on the computer. Most computers have a built in heat sensor that shuts off the cpu if it gets too hot to protect the cpu from burning itself out. Try this and let me know how that works.

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing two ram( ddr400 512mb and pc400 512mb )


If you are referring to computer RAM always put the largest ram module closest the CPU central processing unit


try to keep the same brand and type of ram the same ie: ddr ddr3.......
you will be able to read the ram type on the ram already inside


make sure you secure the ram modules by pressing the levers down firmly at both ends of of there sockets


make sure your computer is turned of before you attempt this
be sure to wear an earth strap before touching anything inside your computer
the ram modules sockets are located near your cpu


If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules.


hope this helps you

Mar 21, 2012 | Motherboards

1 Answer

Msi 880gms-e35(fx)


This is a indicator the motherboard is slowly breaking down, I suggest you leave well enough alone and use it as long it will last.

Mar 17, 2012 | MSI Motherboards

1 Answer

I DO NOT KNOW THE PASSWORD OR USERNAME FOR MY QWEST P5000Z MODEM . dONT KNOW WHERE TO START TO FIND IT OR CHANGE IT? PLEASE HELP! THANKS- AMY : )


what operating system ? and what type and brand of computer desktop laptop ?

Often many users will leave the administrator account alone or have other accounts with administrator rights. If you're not logging into the computer as administrator or have other accounts follow the below steps to reset your other accounts password.

Reboot the computer into Safe Mode.

When logging into Safe Mode you should be prompted with an option to what account you wish to use. Select the Administrator account. If prompted for a password try pressing Enter on the keyboard for no password. If this does not work, try other passwords you may have used. If you're unable to log into the Administrator account skip to the next suggestion.

Once you've logged into the Administrator account open Control Panel and User Accounts.

In User Accounts select the account you wish to change the password for, click change password and then enter the new password or click remove the password to remove the password from the account.

hope this helps

Sep 22, 2011 | Motherboards

3 Answers

I lose my sound


Here is a guide to the sounds on a computer
the drivers might have been corrupted by something foreign or you might have got a virus run your antivrus program
if your computer came with a motherboard disc the sound drivers could be on it
you might have to uninstall then reinstall both the sound drivers and the sound card make sure you have both of these devices backed up to a disc before uninstalling
a yellow? question mark means you need to install/update driver to do this
right click to install driver also
click start control panel sounds and audio,volume,advanced,speakers select appropriate speakers also audio you will find 3 drop down lists make sure you have made the correct adjustments there
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it

click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can make adjustments there you can also tick in the box place icon in taskbar
hope this helps

Jan 09, 2011 | ASUS P5PE-VM Motherboard

1 Answer

My foxconn when i try to turn on! dont turn on! but when i reset bios! without jumper can turn on but if i put the jumper again dont start when i try to put on!.


Hi,
Putting the jumper on the two pins shorts out bios and resets it. Computer will not start if the jumper is on the pins. Leave the jumper off after reset, or just change jumper to the other two pins if you have them on your mobo..

Hank

Aug 19, 2009 | Motherboards

1 Answer

Won't start up


when your computer it should say f1 to stup if you go into to the setup menu and scroll around untill you find bios and if you are going to use it dont turn it off if you are not going to use the bios it will help your computer if you turn that off rate me thanx

Apr 19, 2009 | ASUS P4P800SE Motherboard

1 Answer

Memory ddr 333 vs. 400


Have you tried and tested them alone? 1 Memory at a time? if they work. If they work alone must be something wrong with the slots.

I just remembered, is 333 SDRAM or DDR? I forgot if the

If the 333 is SDRAM it will not work together with the DDR400.

Mar 30, 2009 | IBM Motherboards

1 Answer

My cpu does not take ShutDown Autometicaly.


FOR THIS YOU NEED TO EDIT REGISTRY, AND BE AWARE OF THE FACT THAT EDIT REGISTRY CAN DMG YOUR OS!!!!

to edit registry you need to execute a program from the command option in your start menu ( dont know the exact name to execute, got no english version of windows).. but you need to execute regedit.exe

now you enter regedit, it's a kind of explorer type environment... go to:

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]

then search for the value

PowerdownAfterShutdown

behind that there is :

REG_SZ (String Value)

leave that alone.

then:

a 0 (zero)

that needs to be changed to 1,

you can change it by right click on "powerdownaftershutdown" and choose the top option (i asume edit (again no english version.or something)

now change it to 1, press ok, and exit registry editor, save it and problem should be fixed.

Jan 29, 2009 | ASUS K8S-MX Motherboard

1 Answer

Help!!!!


Look like that file is related to MyWebSearch, a common spyware app.  You can remove it from startups by start>msconfig

From there you can click the startup tab.  This will show all programs that load when you turn your computer on.  Find m3plugin and uncheck it.  Feel free to remove any application you know you don't need running right off the bat (if you're not quite sure what it is, google it.  If you're still not sure.... leave it alone).  Click apply and you will be prompted to exit with our without restarting your computer.

Aug 22, 2008 | Intel Motherboard

1 Answer

Mother board


any settings that i need to change so that the HDD will work properly with asus p4b266...the HDD is working alone in other boards.but with asus p4b266 there is an error in reading disk.

Jun 02, 2008 | ASUS P4B266 Motherboard

Not finding what you are looking for?
ASUS P4PE2-X Motherboard Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Tony

Level 3 Expert

2598 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...