Question about Lexmark Printers & Copiers

3 Answers

Scanner - Lexmark Printers & Copiers

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 731 Answers

Whats the Issue with the lexmark scanner?

Posted on Jan 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 1,879 Answers

Http://www.fixya.com/support/r1468656-free_printer_drivers_lost_driver

Posted on Jan 11, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Welcome to Fixya! Can You let me know Exactly what your Problem is?

Posted on Jan 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error c3100


C3100 Scanner carriage problem
The home position is not correct when
the power is turned on or at the start of
copying using the table.
Poor contact in the
connector terminals.
Check the connection of connector YC4 on
the scanner PWB and the connector on the
scanner home position switch, and the continuity
across the connector terminals. Repair
or replace if necessary.
Defective scanner
PWB.
Replace the scanner PWB and check for
correct operation.
Defective scanner
home position
switch.
Replace the scanner home position switch.
Defective scanner
motor.
Replace the scanner motor.
The mirror frame,
exposure lamp, or
scanner wire is
defective.
Check if the mirror flames and exposure
lamp are on the rail. And check the scanner
wire winds correctly.
took this from a diffirent kyocera copier but it will be the same scanner related code

Jan 03, 2014 | Kyocera TASKalfa 180 Copier

1 Answer

Error c3100


C3100 Scanner carriage problem
The home position is not correct when
the power is turned on or at the start of
copying using the table.
Poor contact in the
connector terminals.
Check the connection of connector YC4 on
the scanner PWB and the connector on the
scanner home position switch, and the continuity
across the connector terminals. Repair
or replace if necessary.
Defective scanner
PWB.
Replace the scanner PWB and check for
correct operation.
Defective scanner
home position
switch.
Replace the scanner home position switch.
Defective scanner
motor.
Replace the scanner motor.
The mirror frame,
exposure lamp, or
scanner wire is
defective.
Check if the mirror flames and exposure
lamp are on the rail. And check the scanner
wire winds correctly.

Sep 28, 2013 | Kyocera Printers & Copiers

1 Answer

Ricoh Aficio Sc 122


The scanner home position sensor
does not detect the home position
during initialization.

Causes:

Scanner I/O board or SBU defective
• Scanner motor defective
• Harness between scanner I/O board
and scanner motor disconnected
• Scanner HP sensor defective
• Harness between SBU and HP sensor
disconnected
• Scanner wire, timing belt, pulley, or
carriage defective

Aug 14, 2012 | Ricoh Aficio 2232C Color Copier

1 Answer

Describe how to put the scanner wire in taskalfa 221 copier


Fitting the scanner wires

NOTE:
When fitting the wires, be sure to use those specified below.
Machine front: (P/N: 2C91236), gray
Machine rear: (P/N: 2C91235), black
Fitting requires the following tools
Two frame securing tools (P/N 302C968310)
Two scanner wire stoppers (P/N 3596811)


Procedure
1. Remove the rear cover.

2. Remove the screw and remove the scanner wire drum gear from the rear side of themachine.

3. Remove the stop ring and bush.

4. Remove the stop ring and bush from the front of the machine.

5. Remove the scanner wire drum shaft from the scanner unit.

6. Insert the locating ball on each of the scanner wires into the hole in the respective
scanner wire drum and wind the scanner wire three turns inward and four turns outward.
With the locating ball as the reference point, wind the shorter end of each of the wires outward.

7. Secure the scanner wires using the scanner wire stoppers.

8. Refit the scanner wire drum shaft to the scanner unit.

9. Insert the two frame securing tools into the positioning holes at the front
and rear of the scanner unit to fix the mirror 2 frame in position.

10. Loop the outer ends of the scanner wires around the outer grooves in the pulleys on the mirror 2 frame, winding from below to above.

11. Hook the round terminals onto the catches inside the scanner unit.

12. Loop the inner ends of the scanner wires around the grooves in the pulleys at the left of the scanner unit, winding from below to above.

13. Loop the scanner wires around the inner grooves in the pulleys on the mirror 2 frame, winding from above to below.

14.Wind the scanner wires around the grooves in the scanner wire guides at the left of the scanner unit.
15. Hook the round terminals onto the scanner wire springs.

16. Remove two scanner wire stoppers and frame securing tools.

17. Focusing on the locating ball of the wire drum, move aside the wires to inside.

18.Move the mirror 2 frame from side to side to correctly locate the wires in position.

19. Put the mirror 1 frame on the scanner rail and move it toward the left side of the machine.

20. Insert the frame securing tools into the positioning holes (leftmost holes) at the front and
rear of the scanner unit and screw the mirror 1 frame while securing both the mirror 1 frame and the mirror 2 frame.

21. Remove two frame securing tools.

22. Refit all the removed parts.

I hope this is helpful,
Shawn


Mar 03, 2011 | Kyocera Copystar 221 Black and White...

3 Answers

When start machine then display shows call for sevice F14


F14 Scanner unit FROM error
Was the main PWA replaced?
YES
Download the scanner total count value into the main PWA in the setting mode (08-388).
NO
Was the scanner unit or scanner control PWA replaced?
YES
Download the scanner total counter value of the main PWA into the scanner control PWA in the setting mode (08-389).
NO
1. Check if each connector between the scanner control PWA (CN6) and the main PWA (CN8)
is disconnected.
2. Check if each connector pin is removed or the harness is broken.
3. Check if any conductor pattern on the scanner control and main PWA is open- or shortcircuited.
4. Replace the scanner control PWA.
5. Replace the main PWA.

Nov 17, 2010 | Toshiba E-Studio167 Copier

1 Answer

Dell a940 AIO makes noise as soon as i turn it on then displays unlock scanner - tried to but will not unlock


Found this: http://support.dell.com/support/edocs/systems/a940/a940en1.pdf

Page iv identifies the location of the scanner lock

Page 44 contains the following

• You unlock the scanner bed. For help locating the scanner lock, see the picture of the printer on page iv.

Page 51 contains

Unlock Scanner message
The scanner is locked. To unlock it:
1 Press Power to turn the printer off.
2 Use both hands to lift the printer (scanner unit) until the scanner support
holds it open.
To the left and beside the scanner support is the scanner lock. For help, see
page iv.
3 Pull the scanner lock toward you to unlock the scanner.
4 Using both hands, lift the printer (scanner unit).
5 Push and hold the scanner support back.
6 Lower the printer (scanner unit) until it is completely closed.
7 Press Power to turn the printer back on.

Hope it helps.

Oct 25, 2009 | Dell A940 All-In-One InkJet Printer

1 Answer

Lexmark X5340 - All in One Printer/Scanner/Copier/Fax


Please follow the steps given below to add the scanner using Scanner and Camera wizard.

1. Plug your scanner into your computer.
2. If your scanner is "Plug and Play," the "Scanner and Camera Wizard" starts or double-click add device. Follow the instructions on your screen.

Note:

1. To open "Scanners and Cameras," click "Start," click "Control Panel," click "Printers and Other Hardware" and then click "Scanners and Cameras."
2. If you have a "Plug and Play" scanner, Windows detects it and installs it automatically.
3. If your scanner is not "Plug and Play," follow the installation instructions that came with the device.
4. If your scanner is not listed in the "Scanner and Camera Installation Wizard," try to install it using device manager.
5. After you install your scanner, you can test it.

Oct 03, 2009 | Lexmark X5470 All-In-One InkJet Printer

4 Answers

52 scanner error


HP LASER PRINTER ERROR CODE 52 – INCORRECT SCANNER SPEED ERROR


HP LASER PRINTERS 2, 2D, 3, 3D

1. Defective cable laser scanner to dc controller. 

2. Defective laser scanner assembly. 

HP LASER PRINTERS 2P, 2P+, 3P 

1. Bad scanner motor. 

2. bad dc controller. 

HP LASER PRINTERS 3SI, 4SI, 4V

1. Faulty cable assembly. 

2. Scanner motor problem.

3. Defective laser scanner assembly.

4. Defective dc controller. 

HP LASER PRINTERS 4, 4+, 5 

1. Faulty laser scanner cable. 

2. Defective laser scanner assembly.

HP LASER PRINTERS 4L, 4P, 5P, 5L, 5SI 

1. Temporary error. Scanner startup failure.

2. Improperly fitted scanning assembly.

3. Scanner cable problem.

4. Defective laser scanner assembly.

5. Defective dc controller board.

HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100

1. Temporary error. scanner rotation error.

2. Replace contact image sensor. 

4. Replace laser scanner. 

5. Replace cables to laser scanner and engine board
HP LASER PRINTERS  1100, 2100, 4000, 4050, 8000
1. Scanner start up error
2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y.
3. Replace scanner ***'y.
4. Replace the engine board.
5. Replace the D.C. controller only on the 8000.
HP LASER PRINTER 2300 ERROR 52.X
1. A temporary scanner start up error.
2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge.
3. Replace the scanner ***'y.
4. Replace the engine board.
HP LASER PRINTERS 4200, 4300 ERROR 52.XX
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
HP COLOR LASER PRINTER 4600, 5500 ERROR 52.XK, 52.XC, 52.XM, 52.XY
1. Error code K - No Black Color.
2. Error code C - No Cyan Color
3. Error code M - No Magenta color
4. Error code Y - No Yellow color
5. Replace laser scanner ***'y
6. Replace the D.C. controller ***'y
HP LASER PRINTERS 5000, 5100
1. Printer scanner speed error has occurred.
2. Replace laser scanner ***'y
3. Replace the D.C. controller ***'y
4. Replace cable ***'y from scanner to D.C. controller.
HP LASER PRINTERS 8100, 8150
1.Laser scanner error/start up/rotation error
2.Replace laser scanner ***'y.
3.Replace D.C. controller board.
4.Replace cable ***'y from scanner to D.C. controller

HP LASER PRINTER 4500, 4550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner. 
3. Replace D.C. controller ***'y
HP COLOR LASER PRINTERS 4600, 5500
1.Laser scanner error/start up/rotation error.
2.Take the toners out and reseat them, or replace them
3. Replace laser scanner ***'y
4. Replace D.C controller board.

HP LASER PRINTER 8500, 8550

1. Temporary error. Laser scanner error/start up/rotation error

2. Replace laser scanner motor.
3. Replace D.C. controller ***'y

HP LASER PRINTER 9000 

1. Temporary laser scanner error/start up/rotation error

2. Replace laser scanner.
3. Replace upper cable guide assembly.
4. Replace DC controller. 

Oct 22, 2008 | HP LaserJet 2840 All-In-One Printer

2 Answers

Lexmark x5150 scanner locked


Unlock Scanner message
The scanner is locked. to unlock it
1. Press Power to turn the All-in-one off.
2. lift the scanner unit until the scanner support holds it. To the left and beside the scanner support is the scanner lock
3.pull the scanner lock toward you to unlock the scanner.
4. close the scanner lid.
5. power on.

Feb 19, 2008 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Dell A940 - Unlock Scanner then press power


See

http://support.dell.com/support/edocs/systems/a940/a940en1.pdf

Page iv identifies the location of the scanner lock

Page 44 contains the following

• You unlock the scanner bed. For help locating the scanner lock, see the picture of the printer on page iv.

Page 51 contains

Unlock Scanner message
The scanner is locked. To unlock it:
1 Press Power to turn the printer off.
2 Use both hands to lift the printer (scanner unit) until the scanner support
holds it open.
To the left and beside the scanner support is the scanner lock. For help, see
page iv.
3 Pull the scanner lock toward you to unlock the scanner.
4 Using both hands, lift the printer (scanner unit).
5 Push and hold the scanner support back.
6 Lower the printer (scanner unit) until it is completely closed.
7 Press Power to turn the printer back on.

Dec 08, 2007 | Dell A940 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...